trinityboringsolutions.com

Clay Texas Directional Boring: Ships Soil, FM 50 and Kountz Bayou

Quick Answer: From our Yukon yard, Clay is 405 road miles away, and work near FM 50 is staffed by our own crews or vetted partner crews. We do directional boring, also called horizontal directional drilling (HDD), for lines that need to pass beneath FM 50 without opening the pavement. Ships soil is heavy clay across much of the mapped ground, so sticky cuttings and pressure need close control. The BNSF Railway and Kountz Bayou also shape crossing plans here.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Clay bores at a glance

  • Unincorporated community in Burleson County, Texas. Population 139 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 405 miles, about 7.8 hours of driving.
  • Ground: Ships soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 25 percent of the area.
  • Highways inside the boundary: FM 50. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Kountz Bayou and Koontz Bayou.
  • Public water: Clay Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Clay near FM 50?

From Yukon, Clay is 405 road miles from our main office, and work here is handled by our crews or vetted partner crews. Clay is in Burleson County, where the 2020 Census counted 139 people; the Census Bureau does not publish yearly estimates for unincorporated places. Along FM 50 and the local streets, we install water, sewer, gas, electric conduit and fiber lines by bore.

Our main office is in Yukon, Oklahoma, and Clay work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A typical Clay job, such as a service line near Folz Street, is much shorter. We have been a family business since 1965 and have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is the ground like to bore in Clay’s Ships soil?

The USDA soil survey maps Ships soil across 41 percent of Clay, and Ships clay, 0 to 1 percent slopes, rarely flooded, accounts for 37 percent. Clay is the mapped surface texture across 58 percent of the area. At about 40 inches below the surface, clay is also mapped across 58 percent, with an average clay content of 53 percent. Those are survey patterns, not test borings. The heavy clay can hold an open hole, but it sticks to the reamer and can grip pipe as it swells.

USDA soil survey, inside the Clay mapped community boundaryWhat is mapped
Soil series mappedShips 41 percent, Kaufman 13 percent, Burlewash 12 percent, Padina 6 percent and Silawa 5 percent
Texture at the surfaceclay 58 percent, fine sandy loam 18 percent and loamy fine sand 17 percent
Texture about 40 inches downclay 58 percent, bedrock 17 percent and fine sandy loam 7 percent
Engineering class about 40 inches downfat clay (CH) 58 percent, silty sand (SM) 8 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches25 percent of the area (0 percent hard rock, 25 percent weathered rock)
Seasonal water table within 60 inches11 percent of the area
Flood prone soils18 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA soil survey maps bedrock within 60 inches across 25 percent of Clay, with a typical depth of 34 inches, so a route can meet weathered rock. Seasonal water tables are mapped within 60 inches across 11 percent, and flood prone soils cover 18 percent; pits near Kountz Bayou may need pumping and careful depth planning. High steel corrosion risk is mapped across 70 percent, a concern for uncoated casing and tracer wire. The geologic map unit is Alluvial sand, silt, clay, and gravel of Holocene age, so ground can vary along a bore.

How do we drill Clay’s clay ground?

With Clay’s heavy clay and alluvial ground, the mud plan matters as much as the drill path. We adjust the fluid, reaming and pullback to the material and keep the proposed route clear of marked lines along FM 50 and local streets.

  1. Ships clay is sticky and can swell around pipe, so we use a thinner fluid with polymer, open the hole in stages and plan to pull pipe the same day.
  2. Because heavy clay can build pressure, we watch fluid returns along FM 50 and adjust the drilling pace to reduce the chance of lifting pavement.
  3. The alluvial sand and gravel mapped in Clay can loosen behind the bit, so staged reaming and a supporting fluid help keep the bore open.
  4. Near Kountz Bayou, wet pits and flood prone soils can affect access; we plan small pits and pumping, then track depth and pitch as the bore advances.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What can a new line cross in Clay near Folz Street?

FM 50 is the state highway inside Clay, with 2.7 mapped roadway miles in the community. A line running beneath it needs a bore plan that accounts for the highway right of way and required cover. Folz Street is the longest named street at 0.42 miles, followed by Palmer Street at 0.4 miles and Booker T Street at 0.38 miles. Clay has 10.79 public road centerline miles in all, so a route may need to avoid several paved or unpaved street surfaces.

CrossingTypeMapped extentWho has a say
FM 50State highway2.7 roadway miles insideState highway office
BNSF RailwayRailroad1.76 track miles insideThe railroad
Kountz BayouStream1.04 channel miles insideChecked for Corps of Engineers jurisdiction
Koontz BayouStream0.68 channel miles insideChecked for Corps of Engineers jurisdiction
Koontz Bayou DrainStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Hale BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Independence CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 1.76 track miles inside Clay, on its Conroe Subdivision, and the mapped community has 2 street and rail crossings. A bore under the track needs an agreement with BNSF Railway, whose terms set casing, depth and flagging. Kountz Bayou runs for 1.04 channel miles here, while Koontz Bayou runs for 0.68 miles. The mapped street crossings include 2 crossings of named streams, so creek routes need planning around channel depth and water conditions.

Who approves a bore in Clay and Burleson County?

Clay is an unincorporated census designated place, so it has no city government; streets and permits fall to the county or state authority. For work in the FM 50 right of way, TxDOT’s Bryan District reviews the utility permit. The utility that owns the line files through TxDOT’s online RULIS system, and we provide the bore plan and profile. Cover depth depends on the line: electric and communication lines need 60 inches at highway crossings, while water lines need 60 inches and pressurized sewer lines need 60 inches. A BNSF Railway crossing also needs an agreement with the railroad. Kountz Bayou crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Clay Water Supply Corporation?

Clay Water Supply Corporation is the public water system. It serves 210 people through 82 connections and gets its water from groundwater wells. Electric utilities reporting service in Burleson County are Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative. That list does not identify the provider at every address, so the line owner needs to be confirmed before planning a conduit bore near FM 50 or Booker T Street.

Line ownerWhat it isSourceSize
Clay Water Supply CorporationPublic water systemGroundwater wells82 connections, 210 people served
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric CooperativeElectric utilities reporting service in Burleson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Clay’s median housing year at 2001; 53 percent of homes were built in 2000 or later and 47 percent from 1960 to 1999. That mix can mean either new service routes or older lines to replace near Folz Street. Before the drill approaches a marked utility, we expose it with hydrovac potholing. A proposed line beneath Booker T Street gets that same check so the crew can see the utility’s depth, not just its paint mark.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Clay and nearby Somerville?

Clay is an unincorporated community in Burleson County, with a mapped area of 4.45 square miles and an elevation of 212 feet. The ZIP code is 77879. Snook is 10.4 miles northwest, Somerville is 11.5 miles west and Lyons is 11.7 miles west. College Station, the nearest larger city, is 13.9 miles north; Caldwell, the county seat, is 23.3 miles northwest. From our Yukon yard, the drive to Clay is 405 road miles and 7.8 hours, which is part of planning mobilization for work near FM 50.

Places near Clay

Which jobs call for a bore near Clay’s Booker T Street?

  • Highway crossing: A line beneath FM 50 is bored rather than trenched through existing pavement, with the route planned for right of way cover.
  • Water service: A new service route near Clay Water Supply Corporation can connect a property without cutting across the surface of Folz Street.
  • Fiber conduit: A conduit run along Booker T Street can pass beneath the road surface, with marked utilities exposed before drilling near them.
  • Creek crossing: A proposed line under Kountz Bayou needs a route planned below the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A proposed bore beneath the BNSF Railway track needs railroad coordination for its casing, depth and flagging terms.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Clay’s BNSF Railway?

For a Clay quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near BNSF Railway is easier to scope when the drawing shows the track and the proposed crossing. Include any nearby street or creek so we can review the access and route.

For boring work in Clay, we set the price according to the job scope and crossing requirements. Ships clay can take staged reaming and careful fluid control, while the 405 road miles from Yukon affect mobilization. The answer also changes with bore length, pipe or conduit size, the number of utilities to expose, and concrete or pavement along FM 50. Kountz Bayou can add creek planning, pits, pumping or sand backfill. A BNSF Railway crossing brings its own coordination, and high profile or emergency work can change the scope.

Questions people ask about boring in Clay

Does Trinity Boring Solutions take directional boring jobs in Clay, Burleson County?

Yes. We take directional boring work in Clay, and jobs are handled by our own crews or by vetted partner drilling contractors. You work with Trinity from the first call through the bore log, including when a partner crew is on site. That applies to proposed work along FM 50 or a local street.

Who approves a bore under FM 50 in Clay?

For a bore in the FM 50 right of way, the line owning utility submits the permit application through TxDOT’s RULIS system, and the TxDOT Bryan District reviews it. We prepare the bore plan and profile for the utility’s filing. The cover depth and crossing details depend on what kind of line is proposed.

What does a bore beneath BNSF Railway in Clay require from us before we plan the crossing?

A proposed crossing beneath BNSF Railway needs an agreement from the railroad that owns the track. Its agreement sets the casing, depth and flagging terms for the crossing. Clay has 1.76 track miles inside the mapped community, so a route near the Conroe Subdivision should be reviewed early.

Can a line be bored under Kountz Bayou in Clay?

A bore under Kountz Bayou can be considered, with the route planned to pass below the channel. In Clay, we check during planning whether the crossing falls under US Army Corps of Engineers jurisdiction. The bayou has 1.04 channel miles in Clay, and nearby flood prone soils or wet pits can affect the work plan.

As we plan underground work in Clay, who runs the public water system, and where does its water come from?

Clay Water Supply Corporation runs the public water system, which uses groundwater wells. Public records report 82 service connections and 210 people served. For a proposed water service near Palmer Street, the connection point and existing line still need to be identified before we lay out a bore.

Which electric utility serves a Clay, Burleson County address, and who confirms conduit specs?

County records to the EIA list Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative as reporting service in Burleson County. That does not establish which provider serves a particular Clay property. Confirm the line owner and conduit specifications for the address before planning a route near FM 50.

What bore sizes and lengths can you handle near Clay Cemetary Road?

We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right setup for a route near Clay Cemetary Road depends on what is going in the ground and the soil conditions. A sketch helps us assess the path and access.

How much notice does Texas811 need for a bore near Folz Street in Clay?

For excavation near Folz Street, make the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before starting. The ticket has a 20 day life; if the start slips more than 14 days past the original notice, submit a new request. If marks wear off or move, have Texas811 refresh them before work continues.

What affects the cost of directional boring near FM 50 in Clay?

The scope drives the price. Length, pipe or conduit size, Ships clay, and the number of utilities that need exposing all matter. Pavement and right of way work along FM 50 can change the plan, as can creek crossings at Kountz Bayou, pits, excavator time, backfill and mobilization from Yukon.

Where the Clay facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Clay

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Clay, Texas

Type the address of your job in Clay. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Clay

Same county: Caldwell · Cade Lakes · Deanville · Tunis. All counties: Texas county list.