trinityboringsolutions.com

Old River-Winfree Texas Directional Boring: Dylan Clay, FM 565 and Old River

Quick Answer: EPA records do not match a water provider to each Old River-Winfree address; CenterPoint Energy and Entergy Texas report electric service in Chambers County, so confirm the line owner before a conduit bore near FM 565. Trinity takes directional boring, also called horizontal directional drilling (HDD), work along Cove Road in Old River-Winfree. The Yukon, Oklahoma main office is 486 road miles from Mont Belvieu, which affects mobilization. USDA maps Dylan clay, which can cling to the reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Old River-Winfree bores at a glance

  • Incorporated city in Chambers County and Liberty County, Texas. Population 1,383 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 486 miles, about 9.4 hours of driving.
  • Ground: Dylan soil is mapped on 29 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 565 and FM 1409. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Old River, Little Caney Creek and Labitt Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Old River in Old River-Winfree?

EPA records do not match a water provider to a specific Old River-Winfree address, and CenterPoint Energy and Entergy Texas report electric service in Chambers County. Confirm the owner of each existing line before planning a bore. With 1,383 residents, we plan underground work in Chambers County around the access and crossing needs of Old River-Winfree. We install water, sewer, gas, electric conduit and fiber along routes such as FM 565 and Cove Road, with the path set to the project.

Our main office is in Yukon, Oklahoma, and Old River-Winfree work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that began in 1965, and directional boring since 1982 means four decades of practice relevant to Dylan clay and the Old River crossings.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Old River-Winfree have near Dylan soil?

The USDA soil survey maps Dylan soil across 29 percent of Old River-Winfree, with Vamont at 28 percent and Morey at 16 percent. At about 40 inches, clay accounts for 78 percent of mapped soil texture, and the average clay content is 56 percent. Surface mapping is 54 percent clay and 23 percent silty clay. That points to sticky cuttings around Cove Road, not a uniform subsurface at every address; these are mapped patterns, so the bore plan still has to match the route.

USDA soil survey, inside the Old River-Winfree city limitsWhat is mapped
Soil series mappedDylan 29 percent, Vamont 28 percent, Morey 16 percent, Beaumont 14 percent and Aris 5 percent
Texture at the surfaceclay 54 percent, silty clay 23 percent and loam 21 percent
Texture about 40 inches downclay 78 percent and clay loam 21 percent
Engineering class about 40 inches downfat clay (CH) 83 percent and lean clay (CL) 16 percent
Average clay content about 40 inches down56 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches63 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey does not map bedrock within the top five feet under Old River-Winfree, though that does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 63 percent of the area, so pits near Little Caney Creek may need pumping. Flood prone soils cover 4 percent, a factor for Old River crossings. High steel corrosion risk is mapped across 99 percent, so the line owner should address casing and tracer wire materials. The geologic map shows the Pleistocene Beaumont Formation, areas predominantly sand; its sand, silt and minor gravel can call for staged reaming.

How do we drill clay in Old River-Winfree?

Dylan soil and the mapped clay share call for a controlled bore, not a rushed pull. Along Cove Road, we match fluid, reaming and pit work to the ground the route meets.

  1. Dylan soil and the mapped clay share can leave sticky cuttings on the reamer, so we use thinner fluid with polymer and open the hole in stages.
  2. Where heavy clay sits below Cove Road, we watch fluid returns and keep pressure controlled so drilling fluid does not lift pavement.
  3. With a seasonal water table mapped near Little Caney Creek, we keep pits small and pump them as needed to manage water.
  4. Before a bore near FM 565 reaches a marked line, we expose it by hydrovac; a walkover locator tracks the head while depth and pitch are logged.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross on Cove Road in Old River-Winfree?

FM 565 runs 4.9 mapped roadway miles inside Old River-Winfree, and FM 1409 runs 3.2 miles. A bore in either state highway right of way needs the TxDOT process and a plan that avoids open cutting the existing highway. Cove Road is the longest named street at 2.13 miles in the city. County Line Road runs 1.37 miles and Indian Ridge Drive 1.21 miles. Those routes may bring pavement and buried utilities into the alignment, so the crossing plan has to fit the specific street and line.

CrossingTypeMapped extentWho has a say
FM 565State highway4.9 roadway miles insideState highway office
FM 1409State highway3.2 roadway miles insideState highway office
Old RiverStream0.39 channel miles insideChecked for Corps of Engineers jurisdiction
Little Caney CreekStream0.11 channel miles insideChecked for Corps of Engineers jurisdiction
Labitt CreekStream0.09 channel miles insideChecked for Corps of Engineers jurisdiction
The CutoffStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Coastal Water Authority CanalStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Cotton BayouStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lost LakeLake or pond970 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Old River-Winfree or within one mile outside its limits, so the mapped routes do not show a track crossing. Old River runs 0.39 channel miles in the city, while Little Caney Creek and Labitt Creek also pass through. Public mapping identifies four street crossings of named streams. Lost Lake is outside the city limits but within one mile; a route toward it still needs site specific review for water and access.

Do I need a permit to bore in Chambers County near FM 565 in Old River-Winfree?

Because Old River-Winfree is an incorporated city, we coordinate boring along Cove Road with the city rather than assuming county street ownership. For work in the right of way of FM 565 or FM 1409, the line owner, not the driller, submits the utility permit through TxDOT RULIS. We give the utility owner the bore plan and profile, then work under the permit issued to it; the TxDOT Beaumont District reviews the application. For a crossing beneath FM 565, we follow TxDOT rules calling for boring or tunneling under an existing highway. At crossings, cover is 60 inches for electric, communication and water lines, and pressurized sewer; along the right of way, electric and communication cover is 48 inches and water cover is 36 inches. A different depth may be set in the permit. Little Caney Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the existing lines in Chambers County near Old River-Winfree?

EPA drinking water records do not match a provider to a particular Old River-Winfree address. Before planning a bore near FM 565, confirm the provider for that address with the city, county or local water district. CenterPoint Energy and Entergy Texas report electric service in Chambers County, but that does not identify the owner at every property. Confirm the line owner before sizing or planning an electric conduit bore along Cove Road.

Line ownerWhat it isSourceSize
CenterPoint Energy and Entergy TexasElectric utilities reporting service in Chambers County and Liberty CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Old River-Winfree housing year at 1991; 10 percent of homes were built before 1960 and 35 percent in 2000 or later. That mix can mean replacement work near older properties as well as service extensions to newer homes. For a proposed line under Indian Ridge Drive, we hydrovac pothole each marked utility before drilling near it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Old River-Winfree and Mont Belvieu?

Old River-Winfree covers 1.57 square miles in Chambers and Liberty counties, with 96 percent of the city in Chambers County, and sits 6 feet above sea level. We identify Old River-Winfree underground work by ZIP codes 77535 and 77523, keeping the service area distinct from nearby Mont Belvieu. Mont Belvieu is 3.3 miles southwest and is the nearest larger city; Cove is 4.3 miles south. Anahuac, the Chambers County seat, is 11.7 miles southeast. The Yukon, Oklahoma main office is 486 road miles away, a 9.4 hour drive, so mobilization is part of planning work near FM 1409.

Places near Old River-Winfree

What boring work comes up near Indian Ridge Drive in Old River-Winfree?

  • Highway crossing: A route under FM 565 needs a bore plan that fits the TxDOT Beaumont District permit and highway cover rules.
  • Water service: A service near Cove Road needs the address specific water provider confirmed before the bore is planned.
  • Fiber conduit: A conduit route along Indian Ridge Drive calls for line owner confirmation and exposure of marked utilities.
  • Creek crossing: A bore beneath Old River needs depth planning under the channel and a check for Corps jurisdiction.
  • Street crossing: A line beneath Shady Lane can pass under pavement without an open cut, with pits placed off the traveled surface.
  • Utility crossing: Near FM 1409, hydrovac potholing exposes each marked line before the drill approaches its location.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Shady Lane in Old River-Winfree?

For a route on Shady Lane, start with the address or map pin, then tell us what goes underground. When planning a crossing at Little Caney Creek, we include the pipe or conduit size and footage in the project details. A sketch or plans help show whether the line runs toward FM 565, crosses a driveway, or needs to reach another part of the property.

Mobilization starts with the 486 road miles from Yukon, then the scope turns on the Dylan clay, pipe size and bore length. A crossing of FM 565 brings right of way planning into the work, while Old River or another creek adds crossing review. We also account for marked utilities to expose, pavement, pits, excavator time and sand backfill. High profile or emergency work can change the planning and equipment needs.

Questions people ask about boring in Old River-Winfree

Does Trinity Boring Solutions take jobs in Old River-Winfree and Chambers County?

Yes. We take directional boring work in Old River-Winfree, and the job is handled through our Yukon main office with our crews or vetted partner contractor crews. You work with Trinity from the first call through the bore log, whether the route follows Cove Road or another local street.

With Dylan and Vamont soils listed locally, should we expect a bore in Old River-Winfree to hit rock?

Bedrock is not mapped in the top five feet of Old River-Winfree, but that does not rule out rock below. The geologic map shows the Pleistocene Beaumont Formation, areas predominantly sand, with silt and minor gravel also described. A route near Dylan soil still needs to be planned for conditions along its actual alignment.

Who approves a bore under FM 565 in Old River-Winfree?

For work in the FM 565 right of way, the utility owner submits the permit application in TxDOT RULIS, and the TxDOT Beaumont District reviews it. We provide the bore plan and profile to the owner and work under its issued permit. The required cover depends on the type of line and whether it crosses or follows the highway.

Can a line be bored under Old River in Old River-Winfree?

A bore can be planned beneath Old River, which runs 0.39 channel miles inside the city. The route needs depth planning to stay under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The final approach depends on the proposed line and site conditions.

Which company owns electric lines in Old River-Winfree, Chambers County?

CenterPoint Energy and Entergy Texas report electric service in Chambers County, but that does not establish which company owns a particular line on Cove Road or another address. Confirm the line owner before a conduit bore, then match the conduit plan to the owner’s requirements.

Does Old River-Winfree control Indian Ridge Drive, and must it be cut for a bore?

Because Old River-Winfree is an incorporated city, we coordinate boring along Cove Road with the city rather than assuming county street ownership. A bore under Indian Ridge Drive can avoid cutting the pavement by placing pits in the ground on either side. The route still needs utility exposure and any required street approval before work begins.

How early should I call 811 for a bore on Cove Road in Old River-Winfree?

Call Texas811 at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays; do not submit earlier than 14 days before work. If a Cove Road start moves more than 14 days beyond the original notice, submit a new request. If marks are worn or moved near Shady Lane, we refresh them through Texas811 before continuing work.

Does the distance from Mont Belvieu to Old River-Winfree change a boring job?

Mont Belvieu is 3.3 miles southwest of Old River-Winfree, but Trinity mobilizes from its Yukon, Oklahoma main office, 486 road miles away. That distance affects mobilization planning for work near FM 565. The length, ground and crossings still shape the equipment and crew needs for the particular route.

What affects the cost of a directional bore near FM 565 in Old River-Winfree?

The price follows the job scope: bore length and pipe size, Dylan clay, utilities that need exposure, pavement, pits and excavator time. Work in the FM 565 right of way adds permit planning, and a creek crossing such as Old River brings added route review. Mobilization from Yukon also affects the overall scope.

Where the Old River-Winfree facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Old River-Winfree

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Old River-Winfree, Texas

Type the address of your job in Old River-Winfree. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Old River-Winfree

County: Liberty County directional boring. Same county: Winnie · Anahuac · Stowell · Oak Island · Dayton · Cleveland · Plum Grove · Ames · Daisetta · Hardin · Kenefick · Big Thicket Lake Estates. All counties: Texas county list.