trinityboringsolutions.com

Garden Ridge Texas Directional Boring: Comfort Soil, Union Pacific, Bear Creek

Quick Answer: Comfort soil and very stony clay make the drill work through sticky ground; we take directional boring, also called horizontal directional drilling (HDD), in Garden Ridge, Texas, including routes under FM 2252. Union Pacific track is another obstacle, and our Yukon, Oklahoma main office is 462 road miles from Garden Ridge. USDA maps bedrock at about 40 inches across much of the city, so a bore may move from clay into rock and needs careful reaming. Bear Creek is also part of the local route planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Garden Ridge bores at a glance

  • Incorporated city in Comal County, Texas. Population 4,378 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 462 miles, about 8.9 hours of driving.
  • Ground: Comfort soil is mapped on 33 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: FM 2252 and FM 3009. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Bear Creek and Dry Comal Creek.
  • Public water: City of Garden Ridge, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near FM 2252 in Garden Ridge?

Comfort soil and its very stony clay texture can make a drill work through sticky ground. Garden Ridge is in Comal County, with a population of 4,378 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber for routes beneath FM 2252, FM 3009 or streets such as New Caverns Road, with the line and crossing conditions guiding the bore plan.

Our main office is in Yukon, Oklahoma, and Garden Ridge work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small 3/4 inch service line near Forest Waters Circle and a large 48 inch casing route beneath FM 2252 show the range we handle, from 10 feet to 5,000 feet. For Garden Ridge projects, our family business began in 1965, and we have done directional boring since 1982.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Garden Ridge have around Comfort soil?

The USDA soil survey maps Comfort soil across 33 percent of Garden Ridge, often as a very stony clay surface. Real gravelly loam accounts for 15 percent, and Rumple soil accounts for 10 percent. At about 40 inches, the mapped texture is bedrock across 70 percent of the area and clay across 20 percent. Average clay content at that depth is 49 percent, and no sandy area is mapped there. For Garden Ridge planning, we treat these as mapped soil patterns, not test borings, and use them accordingly. Sticky clay can build up on a reamer, so staged passes and a same day pull can help keep the hole workable.

USDA soil survey, inside the Garden Ridge city limitsWhat is mapped
Soil series mappedComfort 33 percent, Real 15 percent, Rumple 10 percent, Medlin 7 percent and Pits (miscellaneous area) 7 percent
Texture at the surfacevery stony clay 33 percent, clay 21 percent and gravelly loam 15 percent
Texture about 40 inches downbedrock 70 percent, clay 20 percent and variable 7 percent
Engineering class about 40 inches downfat clay (CH) 22 percent
Average clay content about 40 inches down49 percent
Bedrock mapped within 60 inches70 percent of the area (51 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel78 percent of the area

The USDA survey maps bedrock within 60 inches across 70 percent of Garden Ridge, including hard bedrock across 51 percent and weathered bedrock across 19 percent. Expect a change in drilling pace where clay meets rock. Seasonal water table is not mapped within 60 inches, while flood prone soils account for 2 percent. High steel corrosion risk is mapped across 78 percent, so the line owner should address steel casing and tracer wire materials. The geologic map names Buda Limestone and Del Rio Clay, undivided, of Cenomanian age; the limestone can call for rock drilling tools.

How do we bore Garden Ridge ground where bedrock is mapped?

Comfort soil and bedrock mapped near the surface call for a plan that can handle sticky clay and a hard change in material. Along FM 2252, we adjust the drilling approach to the route and the ground.

  1. With Comfort soil’s clay, we use a thinner drilling fluid and staged reaming to limit sticky buildup, then plan the pipe pull while the hole is open.
  2. Where Garden Ridge clay meets mapped Buda Limestone, we slow down and select tools for the harder ground, checking the drill path as the material changes.
  3. Before drilling near a marked utility, we hydrovac pothole it; for example, a crossing under Forest Waters Circle needs the line exposed because paint does not show depth.
  4. Near Bear Creek, we plan the bore below the channel and check for Corps jurisdiction; a walkover locator tracks depth and pitch without cutting the creek bank.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where might a Garden Ridge line go under Union Pacific?

FM 2252 runs 2.8 mapped roadway miles within Garden Ridge, and FM 3009 runs 2.5. Interstate 35 is 0.8 miles from the city limits, while US 81 is 1.0 mile away. Street routes can include Bat Cave Road, Batcave Road and New Caverns Road, each with more than a mile mapped in the city. Forest Waters Circle is another long local street. A bore beneath any of these roads needs a route and depth plan that fits the road crossing and the utilities already in its path.

CrossingTypeMapped extentWho has a say
FM 2252State highway2.8 roadway miles insideState highway office
FM 3009State highway2.5 roadway miles insideState highway office
Interstate 35Highway nearby0.8 miles outsideState highway office
US 81Highway nearby1 miles outsideState highway office
Union PacificRailroad3.3 track miles insideThe railroad
Bear CreekStream1.81 channel miles insideChecked for Corps of Engineers jurisdiction
Dry Comal CreekStream0.54 channel miles insideChecked for Corps of Engineers jurisdiction
Cibolo CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
West ForkStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 3.3 track miles inside Garden Ridge, and public mapping shows 2 street and rail crossings in the city. A rail route needs the railroad’s agreement, which sets the crossing details. Bear Creek runs 1.81 channel miles in the city, and Dry Comal Creek runs 0.54. No mapped street crossings of named streams appear in the city. Cibolo Creek and West Fork are within one mile of the limits, so a nearby water crossing still needs its own route review.

Who approves a Garden Ridge bore in Comal County?

Garden Ridge is incorporated, so its city streets, including Forest Waters Circle, belong to the city itself. Work in the right of way of FM 2252 or FM 3009 needs a TxDOT utility permit, reviewed by the TxDOT San Antonio District. The utility owner submits the application through RULIS; we provide the bore plan and profile and work under the permit issued to that owner. Under a highway, required cover depends on the line type: electric and communication lines and water lines need 60 inches at crossings, while pressurized sewer lines need 60 inches. A Union Pacific crossing also needs an agreement with the railroad. Bear Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Garden Ridge?

The City of Garden Ridge public water system serves 5,100 people through 1,700 service connections and draws from groundwater wells. That makes existing water lines important to locate before a new service crosses a route near FM 3009. Utilities reporting electric service in Comal County include the City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for a proposed conduit bore before planning its route.

Line ownerWhat it isSourceSize
City of Garden RidgePublic water systemGroundwater wells1,700 connections, 5,100 people served
City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Comal CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Garden Ridge’s median year built at 2000. The survey reports 52 percent of housing built in 2000 or later, 45 percent from 1960 to 1999, and 3 percent before 1960. A new service along Bat Cave Road and a replacement near older housing can encounter different existing lines. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows location, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Garden Ridge, including Schertz?

Garden Ridge is an incorporated city wholly within Comal County, with 7.14 square miles of land and an elevation of 894 feet. In ZIP codes 78266 and 78132, we account for the listed service area when planning Garden Ridge boring work. Selma is 3.7 miles south, Schertz is 5.6 miles southeast, Universal City is 5.9 miles south, Live Oak is 6.3 miles southwest and Cibolo is 6.4 miles southeast. New Braunfels, the county seat, is 11.5 miles east. The Yukon, Oklahoma main office is 462 road miles away, a drive of 8.9 hours, which affects mobilization for work around FM 2252.

Places near Garden Ridge

What kinds of bores fit Garden Ridge streets such as Batcave Road?

  • Highway crossing: A route under FM 2252 needs a bore profile that accounts for highway cover and the utilities along the crossing.
  • Water service: A service near Forest Waters Circle can connect toward the City of Garden Ridge groundwater system after existing lines are located.
  • Fiber route: Fiber along Batcave Road can go underground without opening the full street, with potholes at marked utility conflicts.
  • Creek crossing: A Bear Creek route needs depth planning below the channel and a check for Corps jurisdiction during planning.
  • Rail crossing: A route beneath Union Pacific track needs the railroad’s agreement and crossing details before the bore is planned.
  • Street service: A new sewer or electric conduit route near New Caverns Road can be sized to the line and the street crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Garden Ridge bore near Bear Creek?

For a route near Bear Creek or FM 2252, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. A marked route lets us assess the length, nearby crossings and access before setting the bore scope.

Mobilization starts with the 462 road miles from Yukon, then the ground around the Garden Ridge route matters. Comfort soil’s sticky clay and shallow mapped bedrock can affect drilling time and reaming. A crossing of FM 2252 or Union Pacific track brings added planning, and Bear Creek can affect crossing details. Pipe size and length, utilities to expose, pavement or concrete, pits, excavator time and sand backfill also shape the work. For Garden Ridge work, high profile or emergency conditions can change the scope we plan and schedule.

Questions people ask about boring in Garden Ridge

Does Trinity Boring Solutions take directional boring jobs in Comal County’s Garden Ridge?

Yes. We take directional boring work in Garden Ridge, and the job can be staffed by our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity throughout the project, from the first call to the bore log, including a route near FM 2252.

Who approves a bore under FM 2252 in Garden Ridge, and which state office reviews it?

TxDOT reviews a utility permit for work in FM 2252 right of way through the TxDOT San Antonio District. The utility owner files in RULIS, while we provide the bore plan and profile and work under the owner’s permit. Cover depends on the line type and crossing conditions.

What does a Garden Ridge bore beneath Union Pacific track require?

Union Pacific owns the track in Garden Ridge, with 3.3 track miles inside the city. A crossing needs an agreement with the railroad; that agreement sets crossing details such as casing, depth and flagging. The route also needs to account for nearby streets and buried utilities.

Can a line be bored under Bear Creek in Garden Ridge?

A bore under Bear Creek can be considered, but the route needs to be planned beneath the channel and checked for U.S. Army Corps of Engineers jurisdiction. Bear Creek has 1.81 channel miles in Garden Ridge. Site conditions and utility conflicts help determine the final bore path.

As we plan boring in Garden Ridge, who runs the public water system, and where does its water come from?

The City of Garden Ridge owns the public water system, which draws water from groundwater wells. The system serves 5,100 people through 1,700 service connections in Garden Ridge, a scale we consider when planning underground work. For a new line near FM 3009, we locate existing water infrastructure before the drill approaches a marked conflict.

Which electric utilities report service in Comal County near Garden Ridge?

Utilities reporting electric service in Comal County include the City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. The line owner for a Garden Ridge address needs to be confirmed before planning an electric conduit bore; those utilities do not necessarily serve every address.

What bore sizes and lengths can you handle near Forest Waters Circle in Garden Ridge?

We handle lines from 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Forest Waters Circle is scoped to its actual line size, length, ground and crossings rather than assumed from another job.

How much notice does Texas811 need for a Garden Ridge bore near Bat Cave Road?

For work near Bat Cave Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under FM 2252 in Garden Ridge?

The job scope sets the price, including length, pipe size, Comfort soil and bedrock, utilities to expose, pavement, pits and creek or drainage crossings. FM 2252 and Union Pacific crossings can add planning requirements. The 462 road miles from Yukon also affect mobilization, along with access and any emergency or high profile work.

Where the Garden Ridge facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Garden Ridge

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Garden Ridge, Texas

Type the address of your job in Garden Ridge. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Garden Ridge

Same county: New Braunfels · Canyon Lake · Bulverde · Fair Oaks Ranch · Spring Branch. All counties: Texas county list.