trinityboringsolutions.com

Ralls Texas Directional Boring: Pullman Soil, US 82 and Avenue East

Quick Answer: Trinity Boring Solutions takes directional boring jobs along US 82, also called horizontal directional drilling (HDD), to put utility lines beneath the highway. Ralls is 323 road miles from our Yukon yard, and work near Avenue East is staffed by our own crews and vetted partner contractors. Pullman silty clay loam is common here, so sticky cuttings and clay that grips pipe shape the reaming plan. We use staged reaming and manage drilling fluid to protect pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ralls bores at a glance

  • Incorporated city in Crosby County, Texas. Population 1,613 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 323 miles, about 6.2 hours of driving.
  • Ground: Pullman soil is mapped on 85 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 82, US 62, Texas State Highway 114, Texas State Highway 207 and FM 122. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Ralls, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Ralls, Crosby County?

Ralls is 323 road miles from our Yukon yard, and we staff work along Avenue East with our own crews or crews at partner contractor satellite yards. Ralls’ Census Bureau Vintage 2024 estimate is 1,613 people, a local scale we keep in mind when planning underground work. We install water, sewer, gas, electric conduit and fiber lines, including service runs along Avenue P and connections that need to pass beneath US 82.

Our main office is in Yukon, Oklahoma, and Ralls work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma; a Ralls job beside US 82 is more likely a utility crossing. We started as a family business in 1965 and have drilled directionally since 1982, experience that applies to replacement lines along Avenue P.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pullman soil like to bore in Ralls?

The USDA soil survey maps Pullman soil across 85% of Ralls, with Pullman silty clay loam mapped across 84%. At about 40 inches below the surface, 97% of the mapped area has clay loam texture, and the average clay content there is 39%. Heavy clay is mapped under 99% of the area at that depth. Pullman and Olton soil patterns mapped around Ralls guide our early bore planning, but they are not substitutes for test borings. On a bore beneath US 82, sticky clay can build on the reamer and grip pipe, so we plan staged reaming and keep the pullback moving.

USDA soil survey, inside the Ralls city limitsWhat is mapped
Soil series mappedPullman 85 percent and Olton 11 percent
Texture at the surfacesilty clay loam 85 percent and loam 13 percent
Texture about 40 inches downclay loam 97 percent
Engineering class about 40 inches downlean clay (CL) 98 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches2 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped within the top five feet across Ralls, though the geologic map shows the Blackwater Draw Formation, a Cenozoic unit, and deeper conditions can differ. A seasonal water table is mapped within 60 inches in 2% of the area; pits near Avenue East may need pumping if they take on water. Ralls has no mapped flood prone soils in Crosby County, so we plan each bore around site conditions. High steel corrosion risk is mapped across 99% of Ralls, so the line owner selects coatings for steel casing or tracer wire; HDPE does not share that soil corrosion concern.

How do we bore Ralls clay loam?

Pullman silty clay loam and clay loam at about 40 inches guide the setup in Ralls. We keep fluid pressure in check near US 82 pavement and prepare the pipe before opening the hole for the final pass.

  1. Set up for Pullman clay loam: use a thinner fluid mix with polymer and ream in stages so sticky cuttings do not build heavily on the reamer.
  2. Keep fluid pressure controlled beside US 82 pavement; Ralls soil is heavily clayey at about 40 inches, so excess pressure can lift the surface.
  3. Have pipe ready before the last ream along Avenue East, then pull it while the opening is fresh to limit the chance of clay gripping it.
  4. Hydrovac marked utilities along Avenue P before drilling near them, then track the drill head from the surface and record depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads or tracks might a bore cross in Ralls near US 82?

US 82 and US 62 are mapped through Ralls, along with Texas State Highway 114, Texas State Highway 207 and FM 122. US 82 and Highway 114 each have 1.6 mapped roadway miles inside city limits. For street work, Avenue East is the longest named street at 1.29 miles, followed by Avenue I at 1.12 miles and Avenue P at 1.09 miles. A bore under a highway stays below pavement rather than cutting across it, subject to the road owner’s permit.

CrossingTypeMapped extentWho has a say
US 82US highway1.6 roadway miles insideState highway office
US 62US highway0.8 roadway miles insideState highway office
Texas State Highway 114State highway1.6 roadway miles insideState highway office
Texas State Highway 207State highway1.4 roadway miles insideState highway office
FM 122State highway0.9 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Ralls or within 1 mile outside the limits, so there is no mapped track crossing to plan around. No named streams are mapped inside or within 1 mile, and no lakes or ponds are mapped within 1 mile. No street and rail crossings or street crossings of named streams are mapped in the city. If a project along Avenue East reveals a water feature not shown in the records, its location still needs to be checked during planning.

Who approves a bore on Ralls roads in Crosby County?

Avenue East and Avenue P are city streets, so the City of Ralls is the street authority for work there. US 82, US 62, Texas State Highway 114, Texas State Highway 207 and FM 122 fall under TxDOT permitting when work uses highway right of way. The TxDOT Lubbock District reviews the permit, and the utility owner, not our drilling crew, applies through RULIS. We prepare the bore plan and profile and work under the utility owner’s permit. No railroad or named stream crossing is mapped in Ralls.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Ralls, including the City of Ralls water system?

The City of Ralls public water system serves 1,639 people through 783 service connections and uses purchased surface water. Before planning an electric conduit bore along Avenue P, we identify the line owner; Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative report electric service in Crosby County. That countywide reporting does not establish which provider serves a particular address, so the actual owner matters to the bore plan.

Line ownerWhat it isSourceSize
City of RallsPublic water systemSurface water bought from another system783 connections, 1,639 people served
Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Crosby CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median year built for Ralls housing at 1959; 52% of units were built before 1960, and 2% were built in 2000 or later. That age can mean a replacement bore along Avenue I needs careful checks for existing lines, not an assumption about their location or depth. We hydrovac pothole marked utilities before the drill approaches, since surface marks do not show how deep a line lies.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Ralls from Slaton and our Yukon yard?

Ralls is in Crosby County, at an elevation of 3,110 feet, and covers 1.35 square miles. Its ZIP code is 79357. Lorenzo is 8.7 miles west, while Crosbyton, the county seat, is 8.8 miles east. Idalou is 17.2 miles west, and Petersburg is 18.0 miles northwest. Slaton, the nearest larger city, is 22.2 miles southwest. The Yukon yard is 323 road miles away, a drive of 6.2 hours; that distance is part of planning a job near US 82.

Places near Ralls

What would we bore near Avenue East in Ralls?

  • Highway crossing: A line beneath US 82 is bored below the roadway, with the crossing plan set for the highway right of way.
  • Water service: A replacement connection near the City of Ralls water system can run beneath Avenue East without opening the full street.
  • Fiber conduit: A route near Avenue I can pass under pavement while hydrovac potholing checks marked lines along the bore path.
  • Electric conduit: Near Avenue P, identify the line owner before planning a crossing, since several providers report service in Crosby County.
  • Sewer line: A route along Main Avenue can use staged reaming in Pullman silty clay loam to manage sticky cuttings.
  • Residential replacement: Older homes near Avenue East may need a new service bore, with existing utilities exposed before the drill reaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Main Avenue in Ralls?

For a bore near Main Avenue, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route and access. Include any known pavement or other utilities along the proposed path so we can frame the work.

For a crossing near US 82 in Ralls, route and ground details set our price before we plan the bore. Pullman clay loam can affect drilling fluid, reaming and pipe pullback, while pavement beside US 82 or Main Avenue changes the crossing plan. We also account for line size and length, other utilities to expose, pits, excavator time and backfill. Creek or drainage crossings, high profile or emergency work, and mobilization from the Yukon yard can change the scope. The route and plans help us sort those factors.

Questions people ask about boring in Ralls

Does Trinity take directional boring jobs in Ralls, Crosby County, and who staffs them?

Yes. We take directional boring work in Ralls, and our crews or crews at partner drilling contractors we have vetted carry it out. We work with you from first call through the bore log, with Ralls 323 road miles from the Yukon main office. For a route along Avenue East, we plan the job around the address, the line and the ground.

Who controls Avenue P in Ralls, and can a bore avoid cutting the street?

Avenue P is a city street, so the City of Ralls is the street authority. Directional boring can place a line below the roadway without opening a trench across the pavement. The route still needs utility checks and any required approvals for the work; potholing exposes marked lines before the drill approaches.

How old are buried lines near Avenue I in Ralls, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates give Ralls a median housing year of 1959, with 52% of units built before 1960. That does not establish the age of any particular buried line, but it makes locating and exposing existing utilities important when planning a replacement service near Avenue I.

Does Pullman soil in Ralls corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 99% of Ralls. The line owner decides coatings for steel casing or tracer wire, while HDPE does not share that soil corrosion concern. Along Pullman soil routes, the owner should consider the mapped risk when choosing materials for a bore.

What ground will a bore pass through in Ralls Pullman soil?

Pullman soil is mapped across 85% of Ralls, and the USDA soil survey maps clay loam texture under 97% of the area at about 40 inches. Sticky clay can collect on the reamer and grip the pipe. We use staged reaming and plan the pullback around those mapped conditions.

Will a bore in Ralls hit rock below the Blackwater Draw Formation?

Bedrock is not mapped in Ralls within the top five feet, but that does not rule out rock deeper down. The geologic map identifies the Blackwater Draw Formation, a Cenozoic unit. A specific bore still depends on conditions along its route, including a crossing near US 82.

Does the distance from Slaton change the cost of a Ralls bore?

Slaton is 22.2 miles southwest of Ralls, while our Yukon yard is 323 road miles away. The distance from Yukon can affect mobilization for work near Avenue East. The route, pipe size, footage, ground and crossings also shape the job scope, so the location and plans help us assess it.

How much notice does Texas811 need for a Ralls bore near Avenue East?

For work near Avenue East, count back at least two working days from the planned start, excluding Saturdays, Sundays and legal holidays. Texas law does not allow the request earlier than 14 days before excavation. If the start moves more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a Ralls bore under US 82?

A US 82 crossing price depends on the job, not just the footage. Pullman clay loam, pipe or conduit size, bore length, pavement, utilities to expose, pits and backfill all affect the work. We also consider the crossing permit and mobilization from the Yukon yard. Plans help clarify the route and access.

Where the Ralls facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ralls

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ralls, Texas

Type the address of your job in Ralls. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ralls

All counties: Texas county list.