trinityboringsolutions.com

Hickory Creek Texas Directional Boring: Birome Fine Sandy Loam, Interstate 35 and Carter Branch

Quick Answer: Can we get your line beneath Interstate 35 without cutting the pavement? Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Hickory Creek, Texas, including Interstate 35 crossings. Hickory Creek is 190 road miles from our Yukon, Oklahoma main office, and Point Vista Road helps locate the work. Birome soil is common here, while clay mapped at 40 inches can cling to reamers and slow the pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hickory Creek bores at a glance

  • Incorporated city in Denton County, Texas. Population 6,901 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 190 miles, about 3.7 hours of driving.
  • Ground: Birome soil is mapped on 33 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 33 percent of the area.
  • Highways inside the boundary: Interstate 35, US 77 and FM 2181. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Dallas Area Rapid Transit (DART), with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Carter Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Hickory Creek near Interstate 35?

Can we put your line beneath Interstate 35 without opening the pavement? We use directional boring for Hickory Creek crossings and utility routes. The Census Bureau Vintage 2024 estimate puts the town at 6,901 people in Denton County. Along streets such as Main Street, we can bore routes for water, sewer, gas, electric conduit or fiber lines.

Our main office is in Yukon, Oklahoma, and Hickory Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa. Next to that reach, a typical Hickory Creek job is a shorter service or utility crossing planned around Birome soil and nearby roads.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

How does Birome soil affect boring in Hickory Creek?

The USDA soil survey maps Birome as 33 percent of the soil series in Hickory Creek, followed by Callisburg at 28 percent. Fine sandy loam covers 56 percent of the mapped surface texture, while stony fine sandy loam covers 22 percent. At 40 inches, the mapped textures include bedrock and sandy clay, each at 33 percent, and average clay content is 39 percent. For planning in Hickory Creek, we treat mapped patterns as a guide, not as test borings for a proposed route. Clay can stick to a reamer, so the bore plan must account for how the ground behaves along the actual route.

USDA soil survey, inside the Hickory Creek city limitsWhat is mapped
Soil series mappedBirome 33 percent, Callisburg 28 percent, Wilson 7 percent, Navo 6 percent and Crockett 6 percent
Texture at the surfacefine sandy loam 56 percent, stony fine sandy loam 22 percent and clay loam 13 percent
Texture about 40 inches downbedrock 33 percent, sandy clay 33 percent and clay 13 percent
Engineering class about 40 inches downlean clay (CL) 45 percent and fat clay (CH) 13 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches33 percent of the area (0 percent hard rock, 33 percent weathered rock)
Seasonal water table within 60 inches6 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel80 percent of the area

The USDA soil survey maps bedrock within 60 inches across 33 percent of Hickory Creek, and that mapped bedrock is weathered; hard bedrock is not mapped there within that depth. Seasonal water tables occur within 60 inches across 6 percent, while flood prone soils are not mapped. High steel corrosion risk is mapped across 80 percent, so the line owner should consider casing and tracer wire materials or coatings. The mapped Woodbine Formation is Cenomanian and includes beds of sand, clay, sandstone and shale, a regional description that cannot replace site investigation.

How do we drill Hickory Creek ground with bedrock near the surface?

Birome soil, clay at depth and weathered bedrock call for a bore plan based on the route, not just the map. Near Interstate 35, we track the drill head from the surface and log its depth and pitch.

  1. Where Birome soil gives way to sticky clay at depth, we can use thinner drilling fluid with polymer, ream in stages and have the pipe ready for the pull.
  2. Because heavy clay is mapped in parts of Hickory Creek, we watch fluid returns near Point Vista Road to limit pressure that could lift pavement.
  3. Where the survey maps weathered bedrock within 60 inches, a hard soil bit may work, but the slower drilling makes depth and pitch checks useful near Interstate 35.
  4. Seasonal water tables are mapped within 60 inches across 6 percent of town, so pits near Carter Branch may need to be kept small and pumped if water collects.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks could a Hickory Creek bore cross near Carter Branch?

Interstate 35 and US 77 each have 4.1 mapped roadway miles inside Hickory Creek, while FM 2181 has 1.3. Those routes can bring highway right of way requirements into a bore plan. Among named local streets, Point Vista Road runs 2.11 miles in town, Hickory Creek Road 2.06 miles and Sycamore Bend Road 1.9 miles. Main Street also runs 1.9 miles, giving crews named routes to check when planning access, pits and utility crossings.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate4.1 roadway miles insideState highway office
US 77US highway4.1 roadway miles insideState highway office
FM 2181State highway1.3 roadway miles insideState highway office
Dallas Area Rapid Transit (DART)Railroad0.79 track miles insideThe railroad
Carter BranchStream0.82 channel miles insideChecked for Corps of Engineers jurisdiction
Lewisville LakeStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Hickory CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Veal Springs BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Poindexter BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Lake LewisvilleLake or pond20,580 acres, insideChecked for Corps of Engineers jurisdiction
Lewisville LakeLake or pond177 acres, insideChecked for Corps of Engineers jurisdiction
Horseshoe LakeLake or pond7 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Dallas Area Rapid Transit (DART) owns 0.79 track miles in Hickory Creek, and public records map 2 street and rail crossings in town. A bore under that track needs an agreement with DART. Carter Branch runs 0.82 channel miles inside town, with one mapped street crossing of a named stream. Lake Lewisville and Lewisville Lake are also mapped within town, so water crossings need review during planning.

Do I need a permit for a Hickory Creek bore in Denton County?

Hickory Creek is incorporated, so Main Street and Point Vista Road are town streets. For work in those streets, check with the town about its requirements. Interstate 35, US 77 and FM 2181 are state routes; a bore in their right of way needs a TxDOT utility permit. The TxDOT Dallas District reviews it, and the utility that owns the line submits the application through RULIS. We prepare the bore plan and profile and work under the permit issued to that utility. For a crossing beneath DART track or Carter Branch, the railroad owner agreement or water crossing review also shapes the plan.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Hickory Creek utility lines in Denton County?

For a Main Street address, confirm the water provider for that specific property with the town, Denton County or the local water district before we plan a bore. Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative report electric service in Denton County. That county list does not identify the owner at every Point Vista Road address, so confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Hickory Creek’s median housing year is 2009 in the American Community Survey 2019 to 2023 five year estimates, which helps frame underground planning. The survey estimates 77 percent of homes were built in 2000 or later, 20 percent from 1960 to 1999 and 3 percent before 1960. A Main Street project may be a new service or replacement work. Before drilling near marked utilities, we use hydrovac potholing to expose them: paint shows position, not depth, and homes from different eras can have different buried lines.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Hickory Creek from Lake Dallas and our Yukon office?

Hickory Creek is in Denton County, at an elevation of 522 feet across 4.9 square miles, and uses ZIP code 75065. Lake Dallas is 1.4 miles northeast, and Highland Village is 2.1 miles southwest. Corinth lies 3.1 miles northwest, while Shady Shores is 3.5 miles north. Denton, the county seat, is 9.6 miles northwest. From our Yukon, Oklahoma main office, the road trip to Hickory Creek is 190 miles and 3.7 hours, which is part of planning crew mobilization for a job near Lake Dallas.

Places near Hickory Creek

Which jobs call for a bore along Hickory Creek Road?

  • Highway crossing: An Interstate 35 bore keeps the line beneath the highway pavement, with the route planned around the highway right of way.
  • Water service: A Main Street service bore can connect a property without trenching across its drive or sidewalk.
  • Fiber route: Along Point Vista Road, a fiber conduit bore can avoid opening the pavement and expose marked utilities first.
  • Creek crossing: A Carter Branch bore needs a planned path beneath the channel and a check for federal jurisdiction during planning.
  • Rail crossing: A route beneath the Dallas Area Rapid Transit (DART) track needs an agreement with the railroad owner before the crossing is planned.
  • Utility replacement: A bore near Hickory Creek Road can replace or extend a line while limiting open cuts across yards and pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Hickory Creek job near Main Street?

For a Main Street quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us understand the route. The position of a crossing on Interstate 35 or near Carter Branch can change the scope, so mark those features on the map if they are involved.

The price follows the work involved, not one detail alone. Birome soil and clay at depth affect drilling and reaming. A crossing of Interstate 35 or the DART track adds coordination, while pavement, exposed utilities, creek crossings and the size of the pits can change the work. Mobilization also matters because Hickory Creek is 190 road miles from Yukon. For work in Hickory Creek, we account for the added planning needs that high profile or emergency work can bring.

Questions people ask about boring in Hickory Creek

Does Trinity Boring Solutions take directional boring jobs in Hickory Creek, Denton County?

Yes. We take directional boring work in Hickory Creek, Denton County, with our own crews and partner contractor satellite yards that Trinity has vetted. From the first call through the bore log, we coordinate with you on Hickory Creek work, regardless of which crew is on site. A Main Street route can be scoped for water, sewer, gas, conduit or fiber.

Is there rock under Hickory Creek, and how much bedrock is mapped?

The USDA soil survey maps bedrock within 60 inches across 33 percent of Hickory Creek, and identifies it as weathered bedrock. For Hickory Creek, we do not treat the mapped depth as evidence of hard bedrock, since none is mapped within that depth. This is a soil survey pattern, not a test of a particular Point Vista Road lot, so a project still needs site specific planning.

Who approves a bore beneath Interstate 35 in Hickory Creek?

TxDOT reviews a utility permit for work in the Interstate 35 right of way through its Dallas District. The utility that owns the line submits the application in RULIS, while we prepare the bore plan and profile and work under the permit issued to that owner. The permit can set the crossing details for the project.

What does a Hickory Creek bore under Dallas Area Rapid Transit (DART) track need?

DART owns the 0.79 track miles mapped in Hickory Creek. A crossing beneath that track needs an agreement with the railroad owner, which sets requirements such as casing, depth and flagging. If the route also uses highway right of way, TxDOT asks for a copy of the railroad agreement.

Can you bore a line beneath Carter Branch in Hickory Creek?

A bore beneath Carter Branch can be planned, but the route and water crossing need review before work is set. Carter Branch runs 0.82 channel miles in Hickory Creek, and river, creek, bayou or lake crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who owns electric lines in Hickory Creek, Denton County, and who confirms conduit specs?

Several providers report electric service in Denton County, including Oncor Electric Delivery Company, Texas-New Mexico Power and Denton County Electric Cooperative. That does not identify the owner at a particular Hickory Creek address. Confirm the line owner and conduit specifications with the utility responsible for the route before planning a conduit bore.

How much notice does Texas811 need for a Hickory Creek bore near Point Vista Road?

Paint near Point Vista Road shows a utility’s position, not its depth. Texas law requires a Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days, submit a new notice; have worn or moved marks refreshed before work continues.

How far is Hickory Creek from the Yukon office, and does Highland Village affect the job?

Hickory Creek is 190 road miles and 3.7 drive hours from our Yukon, Oklahoma main office. Highland Village is 2.1 miles southwest of town, but the job’s location and access still determine mobilization planning. A quote for a site near Highland Village needs the address or map pin and the route details.

What affects the cost of directional boring near Interstate 35 in Hickory Creek?

For Hickory Creek work, we set the price according to the job scope. For an Interstate 35 route, factors include bore length, pipe or conduit size, soil and weathered bedrock, utility crossings, pavement, pits and mobilization from Yukon. A Carter Branch crossing or marked lines that need exposure can also change the work involved. We need the route details to assess the job.

Where the Hickory Creek facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hickory Creek

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hickory Creek, Texas

Type the address of your job in Hickory Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hickory Creek

Same county: Denton · Lewisville · Frisco · Carrollton · Flower Mound · Little Elm · The Colony · Dallas · Fort Worth · Trophy Club · Roanoke · Northlake. All counties: Texas county list.