Corinth Texas Directional Boring: Birome Soil, Interstate 35, DART Track
Quick Answer: Interstate 35 is the hard crossing here, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Corinth, Texas. From the Yukon, Oklahoma main office, the 187 road miles put mobilization on the plan for a bore near the Dallas Area Rapid Transit (DART) track. Birome soil is mapped across 33 percent of Corinth, while sandy clay loam appears at about 40 inches in 39 percent of the city. With Birome soil, we control fluid and stage reaming to keep sticky clay from gripping the pipe.
Corinth bores at a glance
- Incorporated city in Denton County, Texas. Population 24,450 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 187 miles, about 3.7 hours of driving.
- Ground: Birome soil is mapped on 33 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 33 percent of the area.
- Highways inside the boundary: Interstate 35, US 77 and FM 2181. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: Dallas Area Rapid Transit (DART), with 10 mapped street and rail crossings.
- Named streams inside the boundary: Veal Springs Branch and Bryant Branch.
- Public water: City of Corinth, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring under Interstate 35 in Corinth?
Interstate 35 and the Dallas Area Rapid Transit (DART) track are the big crossings to plan around in Corinth, Denton County. For underground planning in Corinth, we use the Census Bureau Vintage 2024 population estimate of 24,450. We install water and sewer lines along streets such as Meadowview Drive, and conduit for electric or fiber where a route crosses Corinth Parkway or Post Oak Drive.
Our main office is in Yukon, Oklahoma, and Corinth work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. When planning directional boring in Corinth, we draw on our family business history, started in 1965, and directional boring since 1982. That experience covers service lines and casings sized for routes under Corinth streets, from 3/4 inch service lines up to 48 inch casing.

What is Birome soil like to bore in Corinth?
The USDA soil survey maps Birome soil across 33 percent of Corinth and Gasil across 27 percent. Fine sandy loam is the mapped surface texture for 65 percent of the city, but the texture shifts with depth: sandy clay loam is mapped at about 40 inches in 39 percent of the area. Clay is mapped at that depth in 11 percent, and the average clay content is 32 percent. For Corinth planning, we treat these as mapped soil patterns, not test borings, and verify ground conditions before setting a bore path. On a Birome route, the deeper clay can hold an open hole and stick to the reamer.
| USDA soil survey, inside the Corinth city limits | What is mapped |
|---|---|
| Soil series mapped | Birome 33 percent, Gasil 27 percent, Callisburg 13 percent, Konsil 10 percent and Wilson 8 percent |
| Texture at the surface | fine sandy loam 65 percent, stony fine sandy loam 22 percent and clay loam 11 percent |
| Texture about 40 inches down | sandy clay loam 39 percent, bedrock 33 percent and sandy clay 15 percent |
| Engineering class about 40 inches down | lean clay (CL) 55 percent and fat clay (CH) 11 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | 33 percent of the area (0 percent hard rock, 33 percent weathered rock) |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 60 percent of the area |
Weathered bedrock is mapped within 60 inches in 33 percent of Corinth, with typical bedrock depth at 32 inches, so those routes may drill slower than soil. Seasonal water tables within 60 inches are mapped in 4 percent, and flood prone soils in 2 percent; pits near Veal Springs Branch still need attention to water and channel depth. High steel corrosion risk is mapped in 60 percent, a concern for steel casing and tracer wire. The Woodbine Formation, of Cenomanian age, includes sand, clay, sandstone and shale, so the route can change from soil to rock.
What does it take to bore Corinth’s sandy clay loam?
Sandy clay loam is mapped at about 40 inches in 39 percent of Corinth, and Birome soil is common at the surface. We match fluid and reaming to the ground, then track the drill head beneath the route.
- On a Birome route, we use thinner fluid and polymer to limit sticky clay on the reamer, then open the hole in stages and pull pipe the same day.
- Because sandy clay loam is mapped at about 40 inches in Corinth, we watch returns and keep pressure controlled beneath pavement such as Post Oak Drive.
- Where weathered bedrock is mapped near the surface, we slow the pass and track depth and pitch as the bore approaches the soil and rock contact.
- Near Veal Springs Branch, we plan the bore below the channel and keep pits on the dirt side so the creek bank remains uncut.

What does a bore have to cross in Corinth near Dallas Area Rapid Transit (DART)?
Interstate 35, US 77 and FM 2181 run through Corinth, so a route crossing one of them needs to account for the road right of way and pavement. Post Oak Drive is the longest named street at 3.15 miles in the city, followed by Corinth Parkway at 3.12 miles and Meadowview Drive at 2.56 miles. Teasley Drive runs 1.99 miles. Those streets give a project a real route to locate, expose and bore beneath without opening the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 35 | Interstate | 6.3 roadway miles inside | State highway office |
| US 77 | US highway | 6.3 roadway miles inside | State highway office |
| FM 2181 | State highway | 3.4 roadway miles inside | State highway office |
| Dallas Area Rapid Transit (DART) | Railroad | 3.07 track miles inside | The railroad |
| CPKC (Kansas City Southern) | Railroad nearby | 0.9 miles outside | The railroad |
| Veal Springs Branch | Stream | 0.62 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bryant Branch | Stream | 0.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cooper Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Hickory Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lewisville Lake | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Carter Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Lewisville | Lake or pond | 20,580 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Sharon Lake | Lake or pond | 18 acres, inside | Checked for Corps of Engineers jurisdiction |
| Unicorn Lake | Lake or pond | 12 acres, nearby | Checked for Corps of Engineers jurisdiction |
The Dallas Area Rapid Transit (DART) Denton Subdivision has 3.07 track miles in Corinth, and public records map 10 combined street and rail crossings. A rail bore needs an agreement with DART, which sets casing, depth and flagging. Veal Springs Branch runs 0.62 channel miles in the city, and Bryant Branch runs 0.05 miles; two mapped street crossings intersect named streams. A creek route is planned below the channel and checked for federal water jurisdiction.
Who has to sign off on a Corinth bore in Denton County?
For a utility crossing Interstate 35, the cover depth sets the bore profile: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. Along highway right of way, the respective depths are 48 inches for electric and communication, and 36 inches for water. The line owner applies through TxDOT’s RULIS system, with the TxDOT Dallas District reviewing the permit; we prepare the bore plan and profile for that filing. A crossing of the DART track also needs an agreement with the railroad, and Veal Springs Branch is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the water lines in Corinth through the City of Corinth?
The City of Corinth public water system uses purchased surface water and serves 23,213 people through 7,715 service connections. For electric work, utilities reporting service in Denton County include Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for a Corinth conduit route before setting its specifications, since the county list does not establish service at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Corinth | Public water system | Surface water bought from another system | 7,715 connections, 23,213 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Denton County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Corinth’s median housing year at 1997; 57 percent of homes date from 1960 to 1999, and 41 percent from 2000 or later. A replacement bore along Meadowview Drive may follow older buried service, while a newer home near Corinth Parkway may need a new connection. In either case, we hydrovac pothole each marked utility on the bore path before drilling near it, since paint shows position but not depth.

How far is Corinth from Denton and our Yukon yard?
Corinth is in Denton County, at an elevation of 611 feet, and covers 7.77 square miles. For Corinth addresses, we use ZIP codes 76210 and 76208 to confirm the service location before planning underground work. Shady Shores is 2.4 miles northeast, Lake Dallas is 3.0 miles southeast, and Hickory Creek is 3.1 miles southeast. Denton, the county seat and nearest larger city, is 6.5 miles northwest. The Yukon, Oklahoma main office is 187 road miles away, a 3.7 hour drive, which matters when planning mobilization for work near Corinth Parkway.
Places near Corinth
- Shady Shores: 2.4 miles northeast
- Directional boring in Lake Dallas: 3 miles southeast
- Directional boring in Hickory Creek: 3.1 miles southeast
- Copper Canyon: 3.7 miles southwest
- Directional boring in Highland Village: 3.8 miles south
- Directional boring in Denton: 6.5 miles northwest
What kinds of bores come up near Corinth Parkway?
- Highway crossing: A utility route under Interstate 35 needs a bore profile set to the required cover and the full road crossing.
- Street service: A water or sewer connection along Meadowview Drive can pass beneath pavement with entry and exit pits in the dirt.
- Fiber conduit: A conduit route near Post Oak Drive needs marked utilities exposed before drilling close to the proposed path.
- Rail crossing: A route under the Dallas Area Rapid Transit (DART) track follows the railroad agreement for casing, depth and flagging.
- Creek crossing: A bore beneath Veal Springs Branch stays below the channel, with planning for possible federal jurisdiction.
- Water service: A connection to the City of Corinth system can be routed beneath Corinth Parkway without cutting the street surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Teasley Drive in Corinth?
A map pin matters on Teasley Drive because it shows which pavement, service connections and nearby marked lines the bore must clear. For a Corinth bore, send us the address or pin, what is going in the ground, the pipe or conduit size, and the footage. A sketch or plans for a route near Veal Springs Branch help us see the crossing and pit locations.
The scope sets the price: Birome soil and weathered bedrock affect drilling time, while a crossing of Interstate 35 or the DART track adds crossing requirements. We also account for pipe size, length, utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. Corinth is 187 road miles from Yukon, so mobilization is part of the estimate, as are high profile or emergency conditions.
Questions people ask about boring in Corinth
Does Trinity Boring Solutions take directional boring jobs in Corinth and Denton County?
Yes. We take directional boring work across Texas, including Corinth in Denton County. The Yukon main office coordinates the job, and our own crews or crews from partner drilling contractors we have vetted do the field work. You work with Trinity through the bore log, including for a route near Interstate 35.
As we plan underground work, who runs Corinth’s public water system, and where does its water come from?
The City of Corinth runs the public water system, which uses purchased surface water. For Corinth underground planning, public records list 7,715 service connections and 23,213 people served by the water system. For a new connection or replacement route near Corinth Parkway, the line owner and the point of connection need to be identified before the bore is planned.
Which electric company serves a Corinth job in Denton County, and who confirms conduit specs?
No single electric provider is listed for every Corinth address. Utilities reporting service in Denton County include Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri County Electric Cooperative and Wise Electric Cooperative. We confirm the actual line owner before planning conduit near Meadowview Drive.
Who controls the streets in Corinth, and can a bore avoid cutting Meadowview Drive?
For street work in Corinth, we plan crossings with the incorporated city’s status in mind, since those streets belong to the city. A directional bore can pass below Meadowview Drive with pits placed off the paved surface, subject to the project route and any required approvals. We expose marked utilities along the path before the drill approaches them.
Do Corinth Parkway homes have older buried lines that need replacement bores?
Some may. The American Community Survey 2019 to 2023 estimates put the median housing year at 1997, with 57 percent of homes built from 1960 to 1999. A replacement route near Corinth Parkway should be checked for existing buried lines; we pothole each marked utility before drilling near it.
Does Birome soil in Corinth corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk in 60 percent of Corinth, so steel casing and tracer wire need consideration along a Birome route. For Corinth installations where this soil corrosion concern applies, we recognize HDPE is not affected by it. The line owner chooses any coating for steel, and the mapped soil information is not a substitute for site testing.
Does Trinity cover Shady Shores and rural sites outside Corinth?
Yes. We serve Oklahoma and Texas and take work across Texas, including places near Corinth such as Shady Shores, 2.4 miles northeast. Rural work outside the city limits can be considered too. The route, access and distance from the Yukon main office help determine the mobilization plan.
How much 811 notice is needed before boring near Post Oak Drive in Corinth?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Post Oak Drive start slips more than 14 days past the original notice, submit a new request. Before work continues in Corinth, we ask that worn or moved marks be refreshed through Texas811.
What affects the cost of a Corinth bore crossing Interstate 35?
For Corinth boring, we set the price from the job scope, including the work described for the site. For an Interstate 35 route, factors include bore length and size, pavement, utilities to expose, soil and rock, and the required crossing plan. Creek crossings, pits, excavator time, backfill, emergency conditions and mobilization from the Yukon office also affect the work.
Where the Corinth facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Corinth
- U.S. Census Bureau, TIGER/Line 2024: Corinth boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Corinth
- U.S. Census Bureau, American Community Survey 2019 to 2023: Corinth housing units and year built
- Macrostrat geologic map compilation: map units under Corinth
- U.S. EPA Safe Drinking Water Information System: public water systems serving Corinth
- U.S. Department of Transportation, North American Rail Network: track owners in Denton County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Denton County
- U.S. Geological Survey, Elevation Point Query Service: Corinth elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Corinth
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Corinth
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Corinth, Texas
Type the address of your job in Corinth. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Corinth
Same county: Lewisville · Frisco · Carrollton · Flower Mound · Little Elm · The Colony · Dallas · Fort Worth · Trophy Club · Roanoke · Northlake · Providence Village. All counties: Texas county list.
