trinityboringsolutions.com

The Colony Texas Directional Boring: Branyon Clay, Texas State Highway 121, BNSF Railway

Quick Answer: Colony Boulevard, Main Street and Memorial Drive are among The Colony’s longest streets, and Texas State Highway 121 is a key crossing for directional boring, also called horizontal directional drilling (HDD). The city has 186.17 public road miles, with BNSF Railway and Indian Creek adding crossing considerations. Our Yukon, Oklahoma main office is 204 road miles away, near routes such as Texas State Highway 121. Branyon clay covers much of the mapped ground and can grip the pipe, so reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

The Colony bores at a glance

  • Incorporated city in Denton County, Texas. Population 45,897 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 204 miles, about 4.1 hours of driving.
  • Ground: Branyon soil is mapped on 51 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 17 percent of the area.
  • Highways inside the boundary: Texas State Highway 121 and FM 423. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Indian Creek, Office Creek and Stewrt Creek.
  • Public water: City of The Colony, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Indian Creek in The Colony?

We take directional boring work in The Colony, Denton County, where the Census Bureau Vintage 2024 estimate puts the population at 45,897. Along streets such as Colony Boulevard, our crews can install water, sewer, gas, electric conduit and fiber lines by bore, with the route and crossings shaping the plan. We also handle auger boring and hydrovac potholing.

Our main office is in Yukon, Oklahoma, and The Colony work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line near Main Street and a 48 inch casing bore beneath Texas State Highway 121 show the range of work we handle. Our family business began in 1965, and we have done directional boring since 1982; we plan The Colony work around its incorporated streets.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Branyon soil like to bore in The Colony?

The USDA soil survey maps Branyon across 51 percent of The Colony, including Branyon clay map units that cover 32 percent and 19 percent of the mapped area. Clay makes up 77 percent of mapped surface texture and 76 percent at about 40 inches below the surface. That heavy clay can stick to the reamer and swell around pipe. These are mapped soil patterns, not test borings, so the route still needs field checks before choosing the bore setup.

USDA soil survey, inside the The Colony city limitsWhat is mapped
Soil series mappedBranyon 51 percent, Ferris 12 percent, Heiden 9 percent and Vertel 3 percent
Texture at the surfaceclay 77 percent, silty clay 3 percent and clay loam 3 percent
Texture about 40 inches downclay 76 percent and bedrock 5 percent
Engineering class about 40 inches downfat clay (CH) 79 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches17 percent of the area (0 percent hard rock, 17 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel83 percent of the area

The USDA soil survey gives a typical bedrock depth of 37 inches, with weathered bedrock mapped within 60 inches across 17 percent of the city; hard bedrock is not mapped in that zone. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 2 percent. High steel corrosion risk is mapped across 83 percent, so the line owner should address casing and tracer wire materials. The Eagle Ford Formation, of Turonian age, includes shale, siltstone and limestone, which can slow a bore where it is encountered.

How do we plan boring through clay beneath The Colony’s incorporated city streets?

Branyon clay is the main mapped surface texture in The Colony, so we manage sticky cuttings and keep fluid pressure in check. Indian Creek and paved streets also shape access and bore depth.

  1. In Branyon clay, we use a thinner drilling fluid with polymer and open the hole in stages to limit sticky cuttings from building up on the reamer.
  2. Because heavy clay covers much of The Colony, we watch fluid returns and pressure near paved streets so drilling fluid does not lift pavement.
  3. Before the drill approaches marked utilities near Main Street, we use hydrovac potholing to expose them; surface marks show location, not depth.
  4. At Indian Creek, we plan a route below the channel, track the drill head from the surface and log depth and pitch as the bore advances.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line go under Texas State Highway 121 in The Colony?

Texas State Highway 121 and FM 423 each have more than six mapped roadway miles inside The Colony, so a route may need a state highway crossing plan. Texas State Highway 121 Business is also 0.9 miles outside the city limits. Colony Boulevard runs 10.21 miles in the city, Main Street 6.15 miles and Memorial Drive 5.28 miles. A bore beneath one of these roads can avoid cutting the pavement, but its path must account for the highway, driveways and existing utilities.

CrossingTypeMapped extentWho has a say
Texas State Highway 121State highway6.5 roadway miles insideState highway office
FM 423State highway6.2 roadway miles insideState highway office
Texas State Highway 121 BusinessHighway nearby0.9 miles outsideState highway office
BNSF RailwayRailroad5.99 track miles insideThe railroad
CPKC (Kansas City Southern)Railroad nearby0.7 miles outsideThe railroad
Indian CreekStream2.67 channel miles insideChecked for Corps of Engineers jurisdiction
Office CreekStream1.75 channel miles insideChecked for Corps of Engineers jurisdiction
Stewrt CreekStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Stewart CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Stonebriar Country Club PondsStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Prestonwood Country Club PondsStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Mc Whorter CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Lake LewisvilleLake or pond20,580 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 5.99 track miles inside The Colony, and public records map 5 street and rail crossings. A crossing needs an agreement with BNSF Railway that sets casing, depth and flagging. Indian Creek runs 2.67 channel miles in the city, and Office Creek runs 1.75; mapped street crossings of named streams total 9. A route near either creek or Lake Lewisville needs water crossing review during planning, including a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore near BNSF Railway in The Colony?

For work beneath Texas State Highway 121 or FM 423, cover depth sets the bore profile: electric and communication crossings need at least 60 inches below the lowest crossed grade, and water crossings need 60 inches. TxDOT Utility Accommodation Rules set other cover depths for lines running along the right of way. The utility owner, not our contractor, submits the application through TxDOT’s RULIS system for review by the TxDOT Dallas District; we prepare the bore plan and profile and work under the owner’s permit. A BNSF Railway crossing needs its owner’s agreement, and an Indian Creek crossing is checked for federal water jurisdiction during planning. Because The Colony is incorporated, we plan boring on its city streets as municipal streets belonging to the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water and electric lines in Denton County and The Colony?

For underground planning in The Colony, we account for the City water system serving 45,367 people through 18,519 connections and using purchased surface water. For electric service in Denton County, reporting utilities include Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore near Colony Boulevard.

Line ownerWhat it isSourceSize
City of The ColonyPublic water systemSurface water bought from another system18,519 connections, 45,367 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put The Colony’s median housing year at 2000; 51 percent of housing units were built in 2000 or later, and 2 percent before 1960. A replacement bore along Main Street may encounter older utilities beside newer services, so we hydrovac pothole marked lines on the route before drilling near them. Locate paint gives position, not depth, and potholing shows the actual utility position.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is The Colony in relation to Hackberry and Yukon?

The Colony is an incorporated city in Denton County, covers 14.01 square miles and sits at 522 feet elevation. For address checks in The Colony, we use ZIP codes 75056, 75036 and 75024. Hackberry is 4.2 miles north, Hebron is 3.1 miles south and Lewisville is 4.9 miles southwest; Denton, the county seat, is 16.4 miles northwest. Our Yukon, Oklahoma main office is 204 road miles away, a drive of 4.1 hours. The distance can affect mobilization for work near Indian Creek or Colony Boulevard.

Places near The Colony

Which jobs call for a bore near Colony Boulevard in The Colony?

  • Highway crossing: A bore beneath Texas State Highway 121 can keep the roadway uncut while the plan accounts for cover and the right of way.
  • Rail crossing: Work beneath BNSF Railway needs an agreement covering casing, depth and flagging for the tracks inside The Colony.
  • Creek crossing: A route beneath Indian Creek is planned around the channel and checked for U.S. Army Corps of Engineers jurisdiction.
  • Street service: A replacement water or sewer line along Main Street can be bored to avoid opening the paved street.
  • Fiber conduit: A fiber route near Colony Boulevard needs marked utilities exposed before the drill approaches the line path.
  • Water connection: A connection to the City of The Colony water system can be routed under a driveway instead of cutting its surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a quote near Plano Parkway in The Colony?

Start with a Plano Parkway address or map pin, then tell us what is going underground, such as a water line or fiber conduit. Give the pipe or conduit size and estimated footage. A sketch or plans showing nearby streets, Indian Creek, Texas State Highway 121 or BNSF Railway help us understand the route and crossings.

Branyon clay is the first cost factor because sticky cuttings can call for staged reaming and careful fluid control. The pipe or conduit size and bore length also shape the equipment and time required. Crossings of Texas State Highway 121, BNSF Railway or Indian Creek add planning and exposure needs. Pavement, pits, excavator time and sand backfill matter too, as can emergency timing and mobilization from Yukon, 204 road miles away.

Questions people ask about boring in The Colony

Does Trinity take directional boring jobs in Denton County near The Colony, and how are crews assigned?

Yes. We take directional boring work in The Colony and keep one point of contact from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. Work near Indian Creek or Colony Boulevard is planned around the route, access and marked utilities.

Who supplies The Colony’s public water, and where does the water come from?

With The Colony owning its public water system and using purchased surface water, we plan boring routes with water infrastructure in mind. Across The Colony, the water system serves 45,367 people through 18,519 service connections, figures we consider when planning underground work. For a bore connecting a property near Main Street, the route still needs to be checked against the existing water line and other marked utilities.

Which electric utilities report service in Denton County for a The Colony conduit bore?

Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton and several electric cooperatives report service in Denton County. ZIP codes 75056, 75036 and 75024 do not identify the provider at every The Colony address, so we verify service details. We confirm the line owner and conduit requirements for the specific route before planning a bore near Colony Boulevard.

Does the city or county control Memorial Drive in The Colony, and must we cut it?

The Colony is incorporated, so Memorial Drive is a city street rather than a county street. A bore can pass beneath the road without cutting its pavement, subject to the route and utility marks. We pothole marked lines first so the crossing plan accounts for their actual depth.

What does The Colony’s housing age near Main Street mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give The Colony a median housing year of 2000. Older homes and newer services can leave different generations of buried lines along Main Street. For a replacement bore, we expose marked utilities by hydrovac before drilling near them rather than relying on paint to show depth.

Can Branyon soil in The Colony corrode steel, and what pipe should we use?

The USDA soil survey maps high steel corrosion risk across 83 percent of The Colony, where Branyon clay is widespread. HDPE is not subject to that steel corrosion concern; the line owner selects any coating needed for steel casing or tracer wire. The right material depends on the line specification and bore design.

How early should I call Texas811 for a The Colony bore along Colony Boulevard?

For Colony Boulevard work, place the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, request a new ticket. On The Colony’s city streets, we have worn or moved marks refreshed through Texas811 before work continues.

How far is The Colony from Lewisville and Trinity’s Yukon main office, and does it affect the job?

The Colony is 4.9 miles northeast of Lewisville, while our Yukon, Oklahoma main office is 204 road miles away, a drive of 4.1 hours. That distance can affect mobilization for a bore near Texas State Highway 121. The route, equipment and crossings also shape the work plan.

What affects the cost of a directional bore under Texas State Highway 121 in The Colony?

The price depends on the specific job. Branyon clay can affect reaming and fluid handling, while Texas State Highway 121 crossings require a suitable bore plan and cover. Length, pipe size, utility exposures, pavement, pits, creek crossings and mobilization from Yukon also affect the scope. A route near BNSF Railway may require additional crossing coordination.

Where the The Colony facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in The Colony

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in The Colony, Texas

Type the address of your job in The Colony. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for The Colony

Same county: Denton · Carrollton · Flower Mound · Little Elm · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club · Roanoke · Northlake · Providence Village. All counties: Texas county list.