trinityboringsolutions.com

Trophy Club Texas Directional Boring: Gasil Soil, Texas State Highway 114 and Marshall Branch

Quick Answer: Gasil fine sandy loam is mapped in Trophy Club, and the clay below can grip a reamer; we do directional boring, also called horizontal directional drilling (HDD), for routes crossing Texas State Highway 114. Trophy Club sits 200 road miles from our Yukon main office, and Indian Creek Drive shows the kind of local corridor a line may follow. Clay can ball up on the reamer. We adjust the fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Trophy Club bores at a glance

  • Incorporated city in Denton County and Tarrant County, Texas. Population 13,704 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 200 miles, about 4 hours of driving.
  • Ground: Gasil soil is mapped on 17 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 18 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Texas State Highway 114, Texas State Highway 170 and Texas State Highway 114 Business.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Marshall Branch.
  • Public water: Trophy Club Municipal Utility District 1, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Trophy Club and Denton County?

We take directional boring work in Trophy Club, primarily in Denton County. The Census Bureau Vintage 2024 estimate puts the town’s population at 13,704. We install water, sewer, gas, electric conduit and fiber lines, including routes along Trophy Club Drive or Indian Creek Drive where a connection needs to reach a property.

Our main office is in Yukon, Oklahoma, and Trophy Club work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa; next to that, a typical Trophy Club Drive service route is a smaller job. For Trophy Club projects, our family business dates to 1965, and we have done directional boring since 1982.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Gasil soil mean for a Trophy Club bore?

The USDA soil survey maps Gasil across 17 percent of Trophy Club, including Gasil fine sandy loam on 1 to 3 percent and 3 to 8 percent slopes. Fine sandy loam covers 37 percent of the mapped surface, while clay accounts for 24 percent. At about 40 inches below the surface, clay is mapped across 35 percent and sandy clay loam across 19 percent. When planning in Trophy Club, we treat mapped patterns as guidance, not as test borings. Clay can cling to a reamer and tighten around pipe, so the actual route still matters.

USDA soil survey, inside the Trophy Club city limitsWhat is mapped
Soil series mappedGasil 17 percent, Birome 16 percent, Branyon 12 percent, Wilson 7 percent and Altoga 7 percent
Texture at the surfacefine sandy loam 37 percent, clay 24 percent and clay loam 17 percent
Texture about 40 inches downclay 35 percent, sandy clay loam 19 percent and bedrock 18 percent
Engineering class about 40 inches downfat clay (CH) 40 percent and lean clay (CL) 40 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches18 percent of the area (2 percent hard rock, 16 percent weathered rock)
Seasonal water table within 60 inches6 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel72 percent of the area

The survey maps bedrock within 60 inches across 18 percent of Trophy Club, with a typical depth of 31 inches, so a route may meet rock earlier than expected. Seasonal water tables are mapped within 60 inches across 6 percent, and flood prone soils across 4 percent; Marshall Branch calls for careful channel depth planning. High steel corrosion risk is mapped across 72 percent, a consideration for casing and tracer wire that the line owner can address through material choices. The Woodbine Formation, of Cenomanian age, includes mapped sandstone, mudstone, sand and clay, so ground conditions can change along a bore.

What do we need to account for when we bore through Trophy Club clay?

Gasil fine sandy loam and mapped clay call for a plan that controls the hole rather than forcing the pull. Along Indian Creek Drive, we would check the route and marked utilities before choosing the reaming sequence.

  1. For Gasil clay, we use thinner drilling fluid with polymer and ream in stages, then plan the pipe pull for the same day the hole is opened.
  2. Where Trophy Club’s mapped heavy clay is present, we watch fluid returns closely and keep pressure controlled to reduce the chance of lifting pavement.
  3. Before a bore near Trophy Club Drive, we expose each marked utility on the route with hydrovac; paint does not show its depth.
  4. At a Marshall Branch crossing, we plan to stay below the channel, track the drill head from the surface and log depth and pitch as it advances.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under Texas State Highway 114 in Trophy Club?

Texas State Highway 114 runs along or touches Trophy Club’s limits, as do Texas State Highway 170 and Texas State Highway 114 Business. US 377 is 0.4 miles away, and Loop 118 is 0.5 miles away. Trophy Club has no highway within its limits, so a project near one of these routes must first establish whether the work enters its right of way. Trophy Club Drive runs 7.31 miles in town, Indian Creek Drive 4.25 miles, and T W King Road 1.21 miles; Mona Vale Road adds another local route.

CrossingTypeMapped extentWho has a say
Texas State Highway 114Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 170Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 114 BusinessHighway nearbyRuns along or touches the city limitsState highway office
US 377Highway nearby0.4 miles outsideState highway office
Loop 118Highway nearby0.5 miles outsideState highway office
Union PacificRailroad nearby0.4 miles outsideThe railroad
Marshall BranchStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Kirkwood BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Denton CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Cade BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Grapevine LakeStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Grapevine LakeLake or pond3,314 acres, nearbyChecked for Corps of Engineers jurisdiction
Turner LakeLake or pond37 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Trophy Club, but Union Pacific track lies 0.4 miles from its limits, and no street and rail crossing is mapped in town. Marshall Branch runs 1.1 channel miles through Trophy Club, where two street crossings of named streams are mapped. Grapevine Lake and Turner Lake are outside the limits. A creek or lake route needs a jurisdiction check during planning, and a bore can leave the channel banks uncut when the alignment and access allow it.

Who approves a Trophy Club bore near Union Pacific track?

Trophy Club is an incorporated town, so its town streets belong to the town. For work in the right of way of Texas State Highway 114 or another state highway, the line owner, not the driller, applies through TxDOT’s RULIS system. TxDOT’s Dallas District reviews the application, and we prepare the bore plan and profile for the owner to submit. Under an existing highway, TxDOT rules call for boring or tunneling. Electric and communication lines need 60 inches of cover at a crossing; water lines need 60 inches, and pressurized sewer lines need 60 inches. A Union Pacific track crossing needs an agreement with the railroad, while a Marshall Branch crossing is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near Trophy Club Municipal Utility District 1?

Trophy Club Municipal Utility District 1 is the local public water system. It serves 13,649 people through 4,875 service connections and uses purchased surface water. Denton County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore near the water district’s lines.

Line ownerWhat it isSourceSize
Trophy Club Municipal Utility District 1Public water systemSurface water bought from another system4,875 connections, 13,649 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton County and Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 five year estimates put Trophy Club’s median housing year at 2000, useful context for underground planning. Those Trophy Club housing age shares give us context for underground planning: 3 percent were built before 1960, 47 percent from 1960 to 1999 and 50 percent in 2000 or later. A project along Trophy Club Drive might serve a newer connection or replace older pipe; either way, we expose marked utilities with hydrovac before drilling near them. Paint shows a line’s position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Trophy Club, Southlake and nearby places?

Trophy Club covers 3.98 square miles, sits at an elevation of 613 feet and is primarily in Denton County, with a small portion in Tarrant County. Its ZIP code is 76262. Westlake is 1.9 miles west, Southlake is 3.0 miles southeast, and Roanoke is 3.6 miles northwest. Denton, the county seat, is 15.6 miles north; Southlake is the nearest larger city. Our Yukon yard is 200 road miles away, a 4.0 hour drive, so that distance is part of planning a job on Indian Creek Drive or beyond town limits.

Places near Trophy Club

What kinds of bores come up near Indian Creek Drive in Trophy Club?

  • Highway crossing: A Texas State Highway 114 bore needs a route and profile suited to the highway right of way, with the utility owner handling the permit application.
  • Water service: A connection near Trophy Club Municipal Utility District 1 needs the line route checked against marked water lines before drilling.
  • Fiber conduit: A run along Indian Creek Drive can use a bore to pass beneath pavement without opening a trench across the street.
  • Creek crossing: A route under Marshall Branch needs channel depth planning and a jurisdiction check during planning.
  • Rail crossing: If a project reaches Union Pacific track outside Trophy Club, the railroad agreement sets the crossing conditions.
  • Street service: A route near Mona Vale Road can connect a property while keeping the driveway or sidewalk surface uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Trophy Club bore near Mona Vale Road?

Start with where: an address or map pin on Mona Vale Road narrows the route. Then tell us what goes in, such as water or fiber; how big the pipe or conduit is; and how long the run is. A sketch or plans showing a crossing near Marshall Branch can help us assess access and the proposed path.

A short, open route near Mona Vale Road with known utilities is simpler to plan than a bore with several exposed crossings. Length, pipe size, Gasil clay, rock, pavement, creek crossings, pits, backfill and excavator time all affect the work. A Texas State Highway 114 crossing or Union Pacific coordination can add planning steps. The 200 road miles from Yukon also affect mobilization, as can high profile or emergency work.

Questions people ask about boring in Trophy Club

Does Trinity Boring Solutions take directional boring jobs in Trophy Club and Denton County?

Yes. We take work in Trophy Club and across Texas. Our own crews and vetted partner drilling contractors staff the work, while customers deal with Trinity from the first call through the bore log. That applies to routes near Indian Creek Drive as well as other parts of Denton County.

Who must approve our bore beneath Texas State Highway 114 in Trophy Club before we plan that crossing?

The line owner applies for the right of way permit through TxDOT’s RULIS system, and TxDOT’s Dallas District reviews it. We prepare the bore plan and profile for the owner. A Texas State Highway 114 crossing must follow the permit’s requirements, including the specified cover and installation method.

What does a Trophy Club bore beneath Union Pacific track require before we plan the crossing?

A crossing needs an agreement with Union Pacific, the railroad mapped 0.4 miles from Trophy Club’s limits. The railroad sets crossing conditions such as casing, depth and flagging. If the route also uses highway right of way, TxDOT asks for a copy of the railroad agreement.

Can you bore a line under Marshall Branch in Trophy Club?

A bore may be planned beneath Marshall Branch, which has 1.1 channel miles in town. The alignment needs to stay under the channel, and planning checks whether the crossing is within U.S. Army Corps of Engineers jurisdiction. Site conditions and the route determine the drilling plan.

Who runs Trophy Club’s public water system, and where does its water come from as we plan underground work?

Trophy Club Municipal Utility District 1 runs the public water system, which uses purchased surface water. Trophy Club’s system serves 13,649 people through 4,875 service connections, figures we consider when planning underground work. We identify and expose marked water lines near a proposed Trophy Club bore before drilling close to them.

Who owns the electric lines for a Trophy Club project in Denton County?

Electric service reported in Denton County includes Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton and several cooperatives. That list does not identify the provider at every address. We confirm the line owner before planning conduit near Trophy Club Municipal Utility District 1 or another route.

Does Trinity cover Westlake and rural sites outside Trophy Club?

Yes. We take work across Texas, including Trophy Club, nearby Westlake and sites outside town limits. Westlake is 1.9 miles west of Trophy Club, while Southlake is 3.0 miles southeast. The address, route and access help us plan work beyond the town’s 3.98 square miles.

How far ahead should I call Texas811 for a Trophy Club Drive bore?

Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Trophy Club Drive start slips more than 14 days past the original notice, make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a Trophy Club bore under Texas State Highway 114?

The route, length, pipe size, soil and rock, exposed utilities, pavement, pits, backfill and creek crossings all affect the job. A Texas State Highway 114 crossing adds right of way planning, while Gasil clay may shape the reaming plan. Our mobilization planning accounts for the 200 road miles from Yukon when scheduling Trophy Club boring work.

Where the Trophy Club facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Trophy Club

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Trophy Club, Texas

Type the address of your job in Trophy Club. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Trophy Club

Same county: Denton · Lewisville · Frisco · Carrollton · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Northlake · Providence Village. All counties: Texas county list.