trinityboringsolutions.com

Rochester Texas Directional Boring: Abilene Soil, Texas State Highway 6 and Eolian Sheet Sand

Quick Answer: The City of Rochester owns the water system, while AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County; we confirm the line owner before a conduit bore near Main Street. We take directional boring, also called horizontal directional drilling (HDD), for work beneath Texas State Highway 6. Rochester is 239 road miles from our Yukon, Oklahoma main office, so a route near O’Brien affects mobilization planning. Abilene soil has heavy clay about 40 inches down, which can stick to a reamer and grip pipe. Along Railroad Street, that ground calls for staged reaming and a ready pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rochester bores at a glance

  • Incorporated city in Haskell County, Texas. Population 251 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 239 miles, about 4.8 hours of driving.
  • Ground: Abilene soil is mapped on 89 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 6 and FM 617. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Rochester, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Rochester and Haskell County?

The City of Rochester owns the public water system, and AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County. We confirm the electric line owner before planning conduit near Main Street. Rochester is an incorporated town in Haskell County with a Census Bureau Vintage 2024 estimate of 251 residents. We install water, sewer, gas, electric conduit and fiber along Rochester streets where a project route calls for them.

Our main office is in Yukon, Oklahoma, and Rochester work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short service route near Main Street can use 3/4 inch service line, while larger work can call for 48 inch casing; our bore lengths range from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982, including work planned around Rochester’s Abilene soil.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show beneath Rochester’s Abilene soil?

The USDA soil survey maps Abilene soil across 89 percent of Rochester, with Miles soil mapped across 10 percent. The surface is mostly loam, with fine sandy loam also mapped. About 40 inches below the surface, the mapped texture is clay across 90 percent of the area and sandy clay loam across 10 percent; average clay content at that depth is 43 percent. These are mapped patterns, not test borings. The clay can hold an open hole, but it is sticky and can build up on the reamer.

USDA soil survey, inside the Rochester city limitsWhat is mapped
Soil series mappedAbilene 89 percent and Miles 10 percent
Texture at the surfaceloam 89 percent and fine sandy loam 10 percent
Texture about 40 inches downclay 90 percent and sandy clay loam 10 percent
Engineering class about 40 inches downfat clay (CH) 89 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel90 percent of the area

The survey maps no bedrock in the top five feet, so a bore plan should not assume shallow rock, while allowing that deeper conditions can differ. It maps no seasonal water table within 60 inches and no flood prone soils, which reduces those mapped concerns for a route near Texas State Highway 6. High steel corrosion risk covers 90 percent of the area, so the line owner should review casing and tracer wire materials; HDPE does not share that steel concern. Eolian sheet sand of Quaternary age is also mapped, alongside Early Permian sedimentary material.

How do we drill Rochester’s clay?

Rochester’s Abilene soil has a high clay share below the surface. On a route near Lincoln Street, we manage sticky cuttings and fluid returns so the hole stays workable without putting excess pressure under pavement.

  1. For Abilene soil near Main Street, we use thinner drilling fluid and polymer to manage sticky clay, then ream in stages so cuttings do not pack the tool.
  2. Because heavy clay is mapped below much of Rochester, we watch fluid returns near Texas State Highway 6 and keep pressure controlled beneath pavement.
  3. With pipe staged before the final ream, we can pull it through promptly on a route near Lincoln Street instead of leaving a clay hole open.
  4. We hydrovac marked utilities along Railroad Street before drilling nearby, then track the drill head from the surface and log its depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a Rochester line pass under Main Street?

Texas State Highway 6 and FM 617 run inside Rochester, so a route that enters their right of way needs state coordination. Main Street and Railroad Street are each mapped for 0.69 miles within town, while Lincoln Street covers 0.67 miles. A bore near any of those streets can keep the surface intact where an open cut would disrupt pavement or access. The specific route and right of way determine the crossing plan; the street names alone do not establish where utilities are buried.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway0.5 roadway miles insideState highway office
FM 617State highway0.4 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Rochester or within one mile outside town, and no street and rail crossing is mapped. No named stream is mapped in town or within one mile, and no street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile. That means the mapped local inventory does not point to a rail or water crossing, though a proposed route near Jefferson Street still needs to be checked against site conditions.

Who approves Rochester work under Texas State Highway 6?

Rochester is incorporated, so its city streets, including Main Street and Lincoln Street, belong to the city; we do not assume a street cut is allowed. For work in the right of way of Texas State Highway 6 or FM 617, the line owner applies through TxDOT’s RULIS system, and the TxDOT Abilene District reviews it. We give the utility owner the bore plan and profile for its application, then work under the permit issued to that owner. TxDOT rules require boring or tunneling beneath existing highway pavement, with required cover set by line type and permit conditions. No local railroad or named stream crossing is mapped.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Rochester water system?

The City of Rochester public water system uses purchased surface water and has 125 service connections serving 248 people. That makes the water owner a key contact when planning a connection or replacement route near Railroad Street. AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County. Those reports do not identify the electric provider at every address, so we confirm the line owner before laying out a conduit bore near Main Street.

Line ownerWhat it isSourceSize
City of RochesterPublic water systemSurface water bought from another system125 connections, 248 people served
AEP Texas North, Big Country Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Haskell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rochester’s median housing year at 1957; 56 percent of homes were built before 1960, 42 percent from 1960 to 1999 and 2 percent in 2000 or later. A replacement bore near Railroad Street may need to work around older buried services, while a new service has a different route and tie in. We hydrovac expose marked utilities on the bore path first, since locate marks show position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Rochester from O’Brien and our Yukon office?

Rochester is an incorporated town in Haskell County, at an elevation of 1,596 feet and covering 0.34 square miles. ZIP code 79544 serves the town. O’Brien is 4.6 miles north, Knox City is 7.5 miles north, Rule is 9.4 miles south and Weinert is 10.6 miles east. Haskell, the county seat, is 12.9 miles southeast. From our Yukon, Oklahoma yard, the road trip to Rochester is 239 miles and 4.8 hours, which is part of planning mobilization for work near Texas State Highway 6.

Places near Rochester

What could we bore near Rochester’s Railroad Street?

  • Water service: A connection near the City of Rochester system can be bored from a launch pit to a receiving pit without cutting across Main Street.
  • Highway crossing: A route beneath Texas State Highway 6 needs a bore plan for the TxDOT right of way and the line owner’s permit.
  • Fiber conduit: A small conduit route near Lincoln Street can avoid an open cut, with marked utilities exposed before drilling approaches them.
  • Street replacement: A water or sewer line near Railroad Street can be routed beneath pavement while crews work from pits in the dirt.
  • Electric conduit: Near Jefferson Street, we first confirm which reported Haskell County electric provider owns the line at the project address.
  • New service: A route toward FM 617 can be planned around the needed footage, pipe size and access for the Rochester job.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Rochester bore near Jefferson Street?

For a route near Jefferson Street, start with the address or a map pin so we can place the work. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show whether the route approaches Main Street or Texas State Highway 6 and where access is available.

The job details shape the price through ground, crossings and logistics. Rochester’s heavy clay at about 40 inches can affect drilling and reaming; a route near Texas State Highway 6 adds right of way planning, and existing utilities to expose add crossing work. Pavement, pits, excavator time and sand backfill also affect the scope. Mobilization from Yukon matters because Rochester is 239 road miles from our yard, and emergency or high profile work can call for more planning.

Questions people ask about boring in Rochester

Does Trinity Boring Solutions take Rochester jobs in Haskell County, and who staffs the bore?

Yes. We take directional boring work in Rochester, and our crews handle projects with support from partner drilling contractors whose work we have vetted. The main office is in Yukon, Oklahoma, and you work with Trinity through the job and bore log, whichever crew is on site near Main Street.

Who owns electric lines in Rochester and Haskell County, and who confirms conduit specs?

AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County. The reporting list does not tell us which provider serves a particular address near Lincoln Street. We confirm the line owner and conduit requirements with the owner before planning an electric conduit bore.

Does the city or county control Rochester streets like Lincoln Street, and must we cut them?

Rochester is incorporated, so its city streets, including Lincoln Street, belong to the city. A directional bore can pass below pavement without cutting the street, with entry and exit pits placed in the dirt. The route and site conditions determine whether that approach fits the work.

Could older buried lines affect a replacement bore near Rochester’s Railroad Street?

They could. The American Community Survey 2019 to 2023 five year estimates give Rochester a median housing year of 1957, with 56 percent of homes built before 1960. That age makes careful utility locating important for a replacement near Railroad Street. We expose marked lines before drilling close to them.

Does Rochester’s Abilene soil corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 90 percent of Rochester. The line owner should consider casing and tracer wire materials for a route through Abilene soil; HDPE is not subject to that steel corrosion concern. The owner selects any coating for steel, based on the line and project.

What ground does a Rochester bore pass through in Abilene soil?

The USDA soil survey maps Abilene soil across 89 percent of Rochester and Miles soil across 10 percent. At about 40 inches below the surface, the mapped texture is clay across 90 percent of the area and sandy clay loam across 10 percent. That clay can cling to the reamer, so staged reaming helps manage the hole.

How early should I request Texas811 marks for a Rochester bore near Main Street?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Texas811 describes the notice as at least two working days. If work near Main Street starts more than 14 days after the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

How far is Rochester from Trinity’s Yukon, Oklahoma main office, and does that affect the job?

Rochester is 239 road miles and a 4.8 hour drive from our Yukon yard. That distance can affect mobilization for work near FM 617. The route, pipe size, ground and access also shape the job, so the distance is one planning factor rather than the whole scope.

What affects the cost of a directional bore in Rochester near Texas State Highway 6?

The price depends on the route and work involved, not a single measure. Rochester’s heavy clay affects drilling, while work in the Texas State Highway 6 right of way adds permitting and planning. Pipe size, footage, utilities to expose, pavement, pits, excavator time, backfill and mobilization from Yukon can also change the scope.

Where the Rochester facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rochester

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rochester, Texas

Type the address of your job in Rochester. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rochester

All counties: Texas county list.