trinityboringsolutions.com

O’Brien Texas Directional Boring: Devol Soil, Texas State Highway 6 and China Branch

Quick Answer: O’Brien is an incorporated city, so Grand Central Avenue and other city streets belong to the city. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas for routes such as a crossing beneath Texas State Highway 6. O’Brien is 234 road miles from our Yukon, Oklahoma main office, with China Branch also shaping route planning. Devol soil covers 56 percent of mapped area, and its sandy ground can cave behind the bit, so staged reaming and a ready pipe matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

O’Brien bores at a glance

  • Incorporated city in Haskell County, Texas. Population 91 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 234 miles, about 4.7 hours of driving.
  • Ground: Devol soil is mapped on 56 percent of the area, with sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 6 and FM 2229. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: China Branch.
  • Public water: City of O’Brien, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near O’Brien and China Branch?

O’Brien is an incorporated city in Haskell County, so its city streets belong to the city. The Census Bureau Vintage 2024 estimate puts its population at 91. On routes near Grand Central Avenue or Texas State Highway 6, we install water, sewer, gas, electric conduit and fiber lines by directional boring, with the route and access shaping the bore plan.

Our main office is in Yukon, Oklahoma, and O’Brien work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. A typical O’Brien job is shorter, with the Devol soil and a street or Texas State Highway 6 crossing setting the plan. We are a family business started 1965 and have done directional boring since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is O’Brien Devol soil like to bore?

The USDA soil survey maps Devol soil across 56 percent of O’Brien, chiefly as Devol-Nobscot complex with 1 to 3 percent slopes. Miles soil covers 26 percent and Abilene soil 18 percent. At about 40 inches below the surface, sandy loam is mapped under 56 percent of the city, sandy clay loam under 26 percent and clay loam under 18 percent. The sandy share means the bore can cut easily but the hole may cave behind the bit, so mud support and staged reaming matter.

USDA soil survey, inside the O’Brien city limitsWhat is mapped
Soil series mappedDevol 56 percent, Miles 26 percent and Abilene 18 percent
Texture at the surfaceloamy sand 56 percent, fine sandy loam 26 percent and loam 18 percent
Texture about 40 inches downsandy loam 56 percent, sandy clay loam 26 percent and clay loam 18 percent
Engineering class about 40 inches downclayey sand (SC) 73 percent and lean clay (CL) 27 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel18 percent of the area

With Devol, Miles, and Abilene among O’Brien’s soil series, we plan carefully around the fact that bedrock is not mapped in the top five feet. Seasonal water table and flood prone soils are not mapped in the city. The USDA soil survey maps high steel corrosion risk across 18 percent, so the line owner should consider steel casing and tracer wire materials; HDPE avoids that soil concern. The geologic map shows Quaternary Eolian sheet sand and older Early Permian sedimentary rock, so a deeper route may meet different material than the surface sand.

What does it take to bore O’Brien sandy loam?

The USDA soil survey maps sandy loam at about 40 inches across much of O’Brien, while Devol soil dominates the mapped pattern. That calls for supporting the open hole instead of pushing fluid hard.

  1. At a Devol soil route, we stage the reaming and have the pipe ready before the last pass, since sandy ground can fall in behind the bit.
  2. Near Grand Central Avenue, we hydrovac expose each marked utility on the route before drilling close; surface paint shows position, not burial depth.
  3. For a bore beneath Texas State Highway 6, a walkover locator tracks the drill head while we record its depth and pitch along the route.
  4. At a China Branch crossing, we plan the bore below the channel and check the proposed route for possible U.S. Army Corps of Engineers jurisdiction.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in O’Brien near Texas State Highway 6?

Texas State Highway 6 runs 0.8 mapped roadway miles inside O’Brien, and FM 2229 adds 0.6 miles. The longer local streets include Grand Central Avenue at 0.81 miles, 9th Street at 0.56 miles and Park Avenue at 0.51 miles. Locust Avenue has 0.39 miles in the city. A route beneath highway pavement needs a bore or tunnel rather than an open cut, while street access and pavement determine where entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway0.8 roadway miles insideState highway office
FM 2229State highway0.6 roadway miles insideState highway office
China BranchStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Public records map no railroad inside O’Brien or within one mile outside its limits, and no street and rail crossings are mapped. China Branch runs 0.13 channel miles through the city, but no street crossing of the named stream is mapped. With China Branch inside O’Brien, no lakes or ponds are mapped within one mile, a distinction we consider when planning crossings. If a proposed line crosses China Branch, its creek route still needs review for possible federal water jurisdiction during planning.

Whose permission does O’Brien work in Haskell County need?

Grand Central Avenue and other city streets belong to O’Brien, while Texas State Highway 6 and FM 2229 are state roads. For work in their right of way, the line owner, not the driller, submits the utility application through TxDOT’s RULIS system. We give that owner the bore plan and profile, and TxDOT’s Abilene District reviews it. Electric and communication lines crossing a highway need 60 inches of cover below the lowest point of the crossed grade; water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. TxDOT rules require boring or tunneling beneath existing highway pavement, with casing and a bore extending beneath all rural highway travel lanes. A China Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of O’Brien water system?

The City of O’Brien public water system is locally owned and uses purchased surface water; it serves 87 people through 72 service connections. For electric service in Haskell County, AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report service. Those records do not identify the provider at every Grand Central Avenue address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of O’BrienPublic water systemSurface water bought from another system72 connections, 87 people served
AEP Texas North, Big Country Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Haskell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put O’Brien’s median housing year at 1955, context we consider when planning underground work along Grand Central Avenue. The survey estimates 61 percent of homes were built before 1960 and 39 percent from 1960 to 1999, with none built in 2000 or later. Along older streets such as Locust Avenue, a project may replace an existing line or add a service. We hydrovac expose each marked utility on the bore path before drilling near it, because locate marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is O’Brien in relation to Knox City?

O’Brien is in Haskell County, at elevation 1,574 feet, and covers 0.5 square miles. ZIP code 79539 serves O’Brien, and we account for Texas State Highway 6 crossings when planning underground boring work in that service area. Knox City is 3.0 miles northeast, Rochester is 4.6 miles south, and Weinert is 10.6 miles east. Munday is 13.5 miles east and Rule is 14.0 miles south. Haskell, the county seat, is 16.5 miles southeast. Our Yukon, Oklahoma main office is 234 road miles away, a 4.7 hour drive, which is part of planning mobilization for work near Texas State Highway 6.

Places near O’Brien

What kinds of bores come up in O’Brien near Grand Central Avenue?

  • Highway crossing: A bore beneath Texas State Highway 6 avoids cutting existing pavement, with entry and exit pits placed outside the travel lanes.
  • Water service: A new connection near the City of O’Brien system needs a route planned around existing service lines and street access.
  • Fiber conduit: A run along Grand Central Avenue can use directional boring to pass below pavement without opening a trench through the street.
  • Creek crossing: A route beneath China Branch needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street service: Work near Locust Avenue starts with locating and exposing marked utilities before the drill approaches the route.
  • Rural service: A line toward Knox City or nearby rural property needs a route and footage plan before equipment is mobilized from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for directional boring near O’Brien Locust Avenue?

Start with the O’Brien address or map pin, such as a route off Locust Avenue, so we can place the work. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and footage. A sketch or plans showing Texas State Highway 6, China Branch or other crossings help us see the route and access.

In O’Brien, soil is a leading price factor because Devol soil and mapped sandy loam can call for staged reaming and mud support. Bore length, pipe size and marked utilities to expose also shape the work. Texas State Highway 6 pavement or a China Branch crossing adds planning and access details. Entry pits, excavator time, sand backfill and pavement affect the scope, while the 234 road miles from Yukon affect mobilization.

Questions people ask about boring in O’Brien

Does Trinity Boring Solutions take jobs in O’Brien, Haskell County, and how are crews assigned?

Yes. We take work in O’Brien, Haskell County, and staff it with our own crews or from satellite yards run by drilling contractors we have vetted. Our Yukon office remains the contact for the job, so the customer can follow planning and the bore log even if a partner crew works near Grand Central Avenue.

Will a directional bore in O’Brien hit rock under Devol soil?

It may encounter rock at depth, but bedrock is not mapped in O’Brien’s top five feet. The geologic map shows Quaternary Eolian sheet sand and Early Permian sedimentary material. A route near Texas State Highway 6 needs its own ground and depth plan rather than an assumption based only on the surface soil.

For a bore under Texas State Highway 6 in O’Brien, does the TxDOT Abilene District handle the state permit?

The line owner applies for the TxDOT utility permit through RULIS, and TxDOT’s Abilene District reviews the application. We provide the bore plan and profile for the owner’s filing. A Texas State Highway 6 crossing also needs the permitted cover and installation details to be reflected in the plan.

Can a new line be bored beneath China Branch in O’Brien?

A route can be planned beneath China Branch, which runs 0.13 channel miles inside O’Brien, but the path and depth must be assessed. Planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Public records map no street crossing of China Branch within the city.

In Haskell County, who runs O’Brien’s public water system, and does its water come from purchased surface water?

The City of O’Brien owns its public water system and uses purchased surface water, a utility detail we consider when planning bores along Park Avenue. Public records list 72 service connections serving 87 people. A bore near Locust Avenue still needs the proposed route checked against the existing water line and other marked utilities.

Which electric utilities report service in O’Brien, Haskell County, and who confirms conduit specifications?

AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County. The line owner for a specific O’Brien address must be identified before an electric conduit bore is planned, including along Grand Central Avenue. The owner confirms the conduit requirements for its line.

Does Trinity cover Knox City and rural sites outside O’Brien?

Yes. We take work in Texas beyond O’Brien, including routes near Knox City, 3.0 miles northeast, and rural sites outside the city limits. A map pin or address helps us review access, distance from Yukon and whether a route approaches Texas State Highway 6 or another mapped crossing.

How much notice does Texas811 need for a bore on Grand Central Avenue in O’Brien?

For a bore on Grand Central Avenue, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; the request is not made earlier than 14 days before work. If the start moves more than 14 days past the notice, submit a new request, and refresh marks that wear off or move before work continues.

What affects the price of a directional bore under Texas State Highway 6 in O’Brien?

The route, length and pipe or conduit size matter, as do Devol soil conditions and the number of marked utilities to expose. Pavement beneath Texas State Highway 6, creek or drainage crossings, pits, excavator time and backfill can change the work. With 234 road miles from Yukon, we factor the haul into mobilization planning for boring work in O’Brien.

Where the O’Brien facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in O’Brien

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in O'Brien, Texas

Type the address of your job in O'Brien. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for O'Brien

Same county: Haskell. All counties: Texas county list.