trinityboringsolutions.com

Weinert Texas Directional Boring: Rotan Soil, US 277 and Lake Creek

Quick Answer: Weinert is a small city, so the city owns its streets; our directional boring, also called horizontal directional drilling (HDD), can cross US 277 without cutting the pavement. From our Yukon, Oklahoma main office, Weinert is 228 road miles away, and North Bruested is one local route to locate before work. Rotan clay loam covers most of the mapped city area, and heavy clay can cling to the reamer. We use staged reaming and manage drilling fluid to keep the hole controlled.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Weinert bores at a glance

  • Incorporated city in Haskell County, Texas. Population 173 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 228 miles, about 4.4 hours of driving.
  • Ground: Rotan soil is mapped on 98 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 277, US 277 Business and FM 617. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Weinert, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Weinert and Lake Creek?

We take directional boring work in Weinert, an incorporated city in Haskell County. The Census Bureau Vintage 2024 estimate puts its population at 173. A route along North Bruested or US 277 can carry water, sewer, gas, electric conduit or fiber, with the line type and crossing plan set for the address.

Our main office is in Yukon, Oklahoma, and Weinert work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical Weinert job is smaller, such as a service line crossing North Bruested or a conduit route near US 277.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Rotan soil affect drilling in Weinert?

The USDA soil survey maps Rotan across 98 percent of Weinert, including Rotan clay loam with 0 to 1 percent slopes. At about 40 inches below the surface, the mapped texture is clay across the area, with an average clay content of 41 percent. Rotan soil mapping helps us plan underground work, but we do not treat mapped patterns as test borings. For a bore near North Bruested, that clay can hold the hole open but may stick to a reamer and grip pipe as it is pulled through.

USDA soil survey, inside the Weinert city limitsWhat is mapped
Soil series mappedRotan 98 percent
Texture at the surfaceclay loam 98 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downlean clay (CL) 98 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey does not map bedrock within the top five feet in Weinert, and it also maps no seasonal water table or flood prone soils. High steel corrosion risk covers the mapped area, so the line owner should consider casing and tracer wire materials; HDPE does not share that steel concern. The geologic map shows Quartz Sand Disintegration Residuum of Quaternary age and Early Permian sedimentary rock, which is a reminder that deeper conditions can differ from the surface soil.

How do we drill Weinert clay?

Rotan clay loam is mapped across most of Weinert, so we plan for sticky cuttings rather than assuming the hole will stay clean by itself. North Bruested and the other street routes need utility checks before the drill advances.

  1. Rotan clay can cling to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages along routes such as Scheffield.
  2. Because mapped clay at about 40 inches is heavy, we watch fluid returns near US 277 pavement to avoid pressure lifting the surface.
  3. We lay the pipe out before the final ream and pull it through the same day the hole opens, limiting the time Rotan clay can grip it.
  4. On a route near Lake Creek, we track the drill head from the surface and record depth and pitch while checking marked utilities before advancing.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads or creeks can a Weinert bore cross near US 277?

US 277 runs 1.4 mapped roadway miles inside Weinert, and US 277 Business adds 0.8 miles. FM 617 accounts for another 0.4 miles, so a route under any of these roads needs its owner and right of way identified before plans are set. North Bruested and Leavitt Avenue are the longest named streets at 0.45 miles each; Scheffield runs 0.4 miles. A bore can pass below pavement rather than opening a trench across these routes.

CrossingTypeMapped extentWho has a say
US 277US highway1.4 roadway miles insideState highway office
US 277 BusinessUS highway0.8 roadway miles insideState highway office
FM 617State highway0.4 roadway miles insideState highway office
Lake CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Weinert or within one mile outside its limits, and public records show no mapped street and rail crossings. Lake Creek is 0.4 miles beyond the city limits; no named stream crosses of streets are mapped inside town. A proposed route toward Lake Creek still needs a channel check during planning, and no lakes or ponds are mapped within one mile.

Who approves a Weinert bore in Haskell County?

US 277, US 277 Business and FM 617 are state or US routes, so work in their right of way needs a TxDOT utility permit. Haskell County is reviewed by the TxDOT Abilene District. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Existing highway pavement is bored or tunneled beneath, with crossing cover and limits set under TxDOT rules and the permit. On North Bruested, we treat the city street as city owned before planning an underground route. Lake Creek planning includes checking for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Weinert water system?

The City of Weinert public water system uses purchased surface water and serves 162 people through 95 service connections. Near those water routes, we expose marked utilities with hydrovac potholing before drilling close to them. AEP Texas North, Big Country Electric Cooperative and Tri-County Electric Cooperative report electric service in Haskell County; we confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of WeinertPublic water systemSurface water bought from another system95 connections, 162 people served
AEP Texas North, Big Country Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Haskell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Weinert’s median housing year at 1965; 36 percent of homes were built before 1960, and 64 percent from 1960 to 1999. That age mix can mean replacement work along North Bruested as well as new service routes. We pothole marked lines on the bore path first, since paint shows position but not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Weinert, including Munday?

Weinert is in Haskell County, at an elevation of 1,525 feet, and covers 0.48 square miles. We use ZIP code 76388 to identify the Weinert location in Haskell County when coordinating underground work. Munday is 9.0 miles north, Knox City is 10.5 miles northwest, and Haskell, the county seat, is 11.8 miles south. The Yukon, Oklahoma main office is 228 road miles away, a 4.4 hour drive; that distance is part of planning crew and equipment mobilization for a North Bruested or US 277 job.

Places near Weinert

What kinds of bores come up on Weinert streets like Scheffield?

  • Highway crossing: A bore below US 277 keeps the roadway uncut, with the route planned to meet the TxDOT permit conditions.
  • Water service: A connection near the City of Weinert system needs potholing where marked lines meet the planned route.
  • Fiber conduit: A run along North Bruested can pass below the street surface instead of opening a trench across it.
  • Creek approach: A route toward Lake Creek needs channel conditions and possible Corps jurisdiction checked during planning.
  • Street utility: A service bore under Scheffield can avoid cutting pavement while connecting a line along the street.
  • Electric conduit: Near FM 617, we confirm the electric line owner before setting the conduit bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Weinert bore near North Bruested?

Start with a map pin, because a point on North Bruested differs from a route near US 277 or the Lake Creek side of town. For a Leavitt Avenue bore, we need to know what goes underground, plus pipe or conduit size and footage. A sketch or plans help us see the alignment, access and crossings before we scope the bore.

The 228 road miles from Yukon affect mobilization for a Weinert job. Rotan clay loam, pipe or conduit size and bore length shape the drilling plan; crossings and exposed utilities add work, especially near US 277 pavement. Concrete, access pits, excavator time, sand backfill and any Lake Creek drainage crossing can also change the scope. High profile or emergency timing is another factor.

Questions people ask about boring in Weinert

Does Trinity take directional boring jobs in Weinert, Haskell County?

Yes. We take directional boring work in Weinert, and our crews or vetted partner contractor crews can handle a route near US 277. Trinity remains the contact from the first call through the bore log, regardless of which crew is on site.

Does Rotan soil in Weinert corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across Weinert, where Rotan is the dominant soil series. The line owner should weigh that when choosing steel casing or tracer wire materials. HDPE is not affected by this mapped soil corrosion concern.

What ground does a bore pass through in Weinert Rotan soil?

Rotan clay loam is mapped across 98 percent of Weinert. At about 40 inches below the surface, the mapped texture is clay, with an average clay content of 41 percent. That ground can hold an open hole but can also ball up on a reamer.

Could we hit rock with a directional bore near Lake Creek in Weinert, and how should we check conditions?

The soil survey does not map bedrock within the top five feet of Weinert, but that does not rule out deeper rock. The geologic map includes Quaternary Quartz Sand Disintegration Residuum and Early Permian sedimentary units, so the actual route near North Bruested still needs to be planned for its depth.

Should we contact the TxDOT Abilene District about approval for a bore under US 277 in Weinert?

TxDOT reviews work in the US 277 right of way through its Abilene District for Haskell County. The line owner files the utility permit through RULIS, and we provide the bore plan and profile. TxDOT’s permit sets the crossing requirements for that route.

Can a line be bored under Lake Creek near Weinert?

A bore can be planned for a Lake Creek crossing, but the route needs site review. The creek is 0.4 miles outside Weinert’s limits, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. The crossing design must account for the channel.

How far is Weinert from Trinity’s Yukon office, and does that matter?

Weinert is 228 road miles from our Yukon, Oklahoma main office, about a 4.4 hour drive. That distance affects mobilization planning for work along North Bruested or near US 277, along with access and the equipment the route requires.

How much 811 notice do I need for a Weinert bore along North Bruested?

For a bore along North Bruested, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a bore near FM 617, we need a new request if the start moves more than 14 days past the original notice. Refresh marks that wear off or move before work continues.

What affects the cost of directional boring in Weinert under US 277?

The job scope determines the price, not just the footage. For a US 277 crossing, length, pipe size, Rotan clay, pavement and the number of utilities to expose all matter. Pits, excavator time, sand backfill, any drainage crossing and the 228 road miles from Yukon can also affect mobilization and planning.

Where the Weinert facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Weinert

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Weinert, Texas

Type the address of your job in Weinert. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Weinert

Same county: Rule. All counties: Texas county list.