trinityboringsolutions.com

Knox City Texas Directional Boring: Miles Soil, Highway 6, China Branch

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Knox City, including routes beneath Texas State Highway 6. The 22.12 public road miles include 2nd Street and Central Avenue, where a bore can keep pavement intact. Knox City is 231 road miles from our Yukon, Oklahoma yard, and the 4.6 hour drive affects mobilization. Miles fine sandy loam is common here, with sandy clay loam mapped below. That ground can hold the bore path, while staged reaming helps manage the clay.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Knox City bores at a glance

  • Incorporated city in Knox County, Texas. Population 1,032 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 231 miles, about 4.6 hours of driving.
  • Ground: Miles soil is mapped on 50 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 6. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: China Branch.
  • Public water: City of Knox City, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near 2nd Street in Knox City?

We take directional boring work in Knox City, in Knox County, where the Census Bureau Vintage 2024 estimate puts the population at 1,032. Along 2nd Street, Central Avenue and Texas State Highway 6, we install water, sewer, gas, electric conduit and fiber lines by bore. The route and line type determine the plan, and we expose marked utilities before drilling near them.

Our main office is in Yukon, Oklahoma, and Knox City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a small service near 2nd Street or a larger casing job beneath Texas State Highway 6, we handle sizes from 3/4 inch service lines to 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982; Knox City is 231 road miles from the Yukon main office.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Miles soil in Knox City?

The USDA soil survey maps Miles fine sandy loam across 48 percent of Knox City and Altus fine sandy loam across 41 percent. Grandfield Devol complex accounts for 9 percent. Fine sandy loam covers 91 percent of the mapped surface texture, with loamy sand on the remainder. At about 40 inches, sandy clay loam is mapped under 91 percent of the area, and sandy loam under 9 percent. The average clay content at that depth is 25 percent, and Knox City’s fine sandy loam surface matters when we plan bore access. These are mapped patterns, not test borings, so the route still needs field evaluation.

USDA soil survey, inside the Knox City city limitsWhat is mapped
Soil series mappedMiles 50 percent, Altus 41 percent and Grandfield 9 percent
Texture at the surfacefine sandy loam 91 percent and loamy sand 9 percent
Texture about 40 inches downsandy clay loam 91 percent and sandy loam 9 percent
Engineering class about 40 inches downclayey sand (SC) 59 percent and lean clay (CL) 41 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped within 60 inches in Knox City, but that does not rule out deeper rock. Seasonal water table soils and flood prone soils are not mapped, so the survey gives no shallow water or flood prone pattern to plan around. High steel corrosion risk is not mapped either; the line owner should still choose materials for any casing or tracer wire. The geologic map shows Eolian Sheet Sand of Quaternary age above older deposits and Early Permian sedimentary rock. The sand can fall in behind a bit, while the deeper mapped units may change drilling conditions.

What does it take to bore Knox City sandy clay loam?

Knox City’s sandy clay loam combines sand with clay, so the bore plan has to keep the hole stable without pushing fluid into pavement. We adjust drilling and reaming to the route.

  1. The USDA survey maps sandy clay loam under 91 percent of Knox City at about 40 inches; we ream in stages and manage fluid so the hole stays controlled.
  2. Before drilling near a marked line, we expose it with hydrovac potholing; on a route under 2nd Street, that confirms the utility depth before the bore approaches.
  3. We track the drill head from the surface and log depth and pitch, especially where the mapped Eolian Sheet Sand may let the hole cave behind the bit.
  4. For a route near China Branch, we plan the bore path and entry pits around the channel, then check during planning for federal creek jurisdiction.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under Texas State Highway 6 in Knox City?

Texas State Highway 6 runs for 1.1 mapped roadway miles inside Knox City, so a route crossing it needs a bore plan that accounts for the highway right of way. For Texas State Highway 6 crossings, we follow TxDOT rules to bore or tunnel beneath existing pavement and route permits through the TxDOT Childress District. Among the longer local streets, 2nd Street runs 1.91 miles, Central Avenue 1.25 miles and Third Street 1.13 miles inside the town. Those street lengths make them useful route references, but the actual crossing and nearby utilities have to be checked at the proposed address.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway1.1 roadway miles insideState highway office
China BranchStream0.31 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Knox City or within one mile outside the limits, so the public records show no local track route to plan around. China Branch runs 0.31 channel miles inside the town. No mapped street crossing of a named stream is recorded, but a proposed bore near China Branch still needs route review. There are no lakes or ponds mapped within one mile, so the crossing plan centers on streets, the highway and the creek rather than a lake route.

Who approves a bore in Knox City and Knox County?

Because Knox City is an incorporated town in Knox County, we treat Main Street as a city street when planning a bore. For work in the right of way of Texas State Highway 6, TxDOT reviews the utility permit through the Childress District. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. No railroad is mapped near Knox City. If a route crosses China Branch, the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Knox City through the City of Knox City system?

The City of Knox City public water system uses purchased surface water and reports 611 service connections serving 1,037 people. A water bore near Central Avenue needs the exact service route and connection point confirmed before drilling. AEP Texas North and Tri County Electric Cooperative report electric service in Knox County. We confirm the line owner for the specific address before planning an electric conduit bore, since the countywide records do not identify the provider at every address.

Line ownerWhat it isSourceSize
City of Knox CityPublic water systemSurface water bought from another system611 connections, 1,037 people served
AEP Texas North and Tri-County Electric CooperativeElectric utilities reporting service in Knox CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Knox City’s median housing year at 1968; 35 percent of homes were built before 1960, 61 percent from 1960 to 1999 and 4 percent in 2000 or later. That mix can mean a project along 2nd Street is replacing older service lines or adding a newer connection. We hydrovac pothole marked utilities on the bore path before drilling near them, then verify their depth rather than relying on paint alone.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Knox City in relation to O’Brien and Benjamin?

Knox City is in Knox County, at an elevation of 1,529 feet, and covers 0.83 square miles. ZIP code 79529 serves the town. O’Brien is 3.0 miles southwest, Rochester is 7.5 miles south, and Munday is 11.2 miles east. Benjamin, the Knox County seat, is 11.5 miles north. Our Yukon, Oklahoma yard is 231 road miles away, a 4.6 hour drive. That distance is part of planning a bore along Texas State Highway 6 because crew and equipment mobilization depend on the job location.

Places near Knox City

What boring work comes up near Central Avenue in Knox City?

  • Highway crossing: A water or communications line beneath Texas State Highway 6 needs a bore plan for the highway right of way.
  • Water service: A new or replacement service near Central Avenue can connect with the City of Knox City system after the line route is confirmed.
  • Fiber conduit: A fiber route along 2nd Street can pass beneath pavement by bore, with marked utilities exposed before drilling nearby.
  • Creek crossing: A route near China Branch needs channel review and planning for the bore path and entry pits.
  • Street service: A sewer or gas line near Third Street can be bored beneath a driveway or street instead of cutting across the surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Knox City bore near Third Street?

For a route near Third Street, start with the address or map pin. Tell us what goes in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show the path around Texas State Highway 6, nearby utilities and any pavement or creek constraints.

Miles soil and its sandy clay loam at depth make ground conditions a leading price factor, along with bore length and pipe size. A crossing of Texas State Highway 6 adds planning around the right of way, while pavement, exposed utilities and any China Branch crossing affect the work. Pit needs, excavator time and sand backfill also matter. Knox City’s 231 road miles from Yukon can affect mobilization, and high profile or emergency work changes the job scope.

Questions people ask about boring in Knox City

Does Trinity take directional boring jobs in Knox City and Knox County, and who staffs them?

Yes. We take directional boring jobs in Knox City, and our crews or vetted partner contractors handle field work. The job remains with Trinity from the first call through the bore log, even when a partner crew is on site. For work near 2nd Street, we plan around the route, line type and marked utilities.

Will a bore in Knox City hit rock below Miles soil?

The USDA survey does not map bedrock within 60 inches in Knox City, but that does not rule out deeper rock. The geologic map shows Quaternary Eolian Sheet Sand and Early Permian sedimentary rock. A route near Central Avenue still needs field evaluation because mapped geology cannot confirm the exact conditions along a bore.

For a bore beneath Texas State Highway 6 in Knox City, do we seek approval through the TxDOT Childress District?

TxDOT reviews the utility permit for work in the Texas State Highway 6 right of way through its Childress District. The utility that owns the line files in the online RULIS system, while we prepare the bore plan and profile and work under that permit. A route along 2nd Street outside the state right of way follows a different path.

Can a line be bored under China Branch in Knox City?

A bore can be planned beneath China Branch, but the route and channel conditions need review first. The stream runs 0.31 channel miles inside Knox City, and proposed creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. Entry pits and the bore path must fit the site.

Who runs the Knox City water system, and where does its water come from?

The City of Knox City owns the public water system, which uses purchased surface water. Public records list 611 service connections serving 1,037 people. For a water service near Central Avenue, confirm the connection point and route with the system before laying out the bore.

Who owns electric lines in Knox County near Knox City, and who confirms conduit specs?

AEP Texas North and Tri County Electric Cooperative report electric service in Knox County, but those records do not identify the provider at every Knox City address. The line owner must be confirmed before planning an electric conduit bore near Texas State Highway 6, and that owner should confirm the conduit specifications.

How far is Knox City from Trinity’s Yukon, Oklahoma office, and does it affect a bore?

Knox City is 231 road miles from our Yukon, Oklahoma main office, about a 4.6 hour drive. That distance can affect mobilization for a bore along 2nd Street or Texas State Highway 6. The route, pipe size, soil and crossing needs also shape the work plan.

How much 811 notice does a bore near 2nd Street in Knox City need?

For a bore near 2nd Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Knox County work, if the start slips more than 14 days past the original notice, we make a new request before rescheduling. If marks on Avenue F are worn or moved, we request refreshed marks through Texas811 before continuing work.

What affects the cost of a directional bore under Texas State Highway 6 in Knox City?

The route and scope determine the price. Miles soil and sandy clay loam affect drilling, while Texas State Highway 6 adds right of way planning. Bore length, line size, utility crossings, pavement, pits, excavator time, backfill and any China Branch crossing also matter. Mobilization from Yukon is considered because Knox City is 231 road miles away.

Where the Knox City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Knox City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Knox City, Texas

Type the address of your job in Knox City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Knox City

Same county: Goree. All counties: Texas county list.