trinityboringsolutions.com

Pleak Texas Directional Boring: Lake Charles Clay, Big Creek and Texas State Highway 36

Quick Answer: From our Yukon, Oklahoma main office, Pleak is 478 road miles away; our own crews and vetted partner crews can handle a bore along Band Road. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for crossings under Texas State Highway 36. USDA maps Lake Charles clay across 43 percent of Pleak, so sticky ground can grip a pipe and call for staged reaming. Big Creek is a local crossing to account for when laying out a route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pleak bores at a glance

  • Incorporated city in Fort Bend County, Texas. Population 1,182 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 478 miles, about 9.5 hours of driving.
  • Ground: Lake Charles soil is mapped on 43 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 36 and FM 2218. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Big Creek, Coon Creek, Seabourne Creek and Kunz Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Pleak under Texas State Highway 36?

Pleak is 478 road miles from our Yukon, Oklahoma main office, and we take work across Texas with our crews and vetted partner drilling crews. The Census Bureau Vintage 2024 estimate puts Pleak at 1,182 people in Fort Bend County. Along streets such as Band Road or Ustinik Road, we install water, sewer, gas, electric conduit and fiber lines to serve a specific project.

Our main office is in Yukon, Oklahoma, and Pleak work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With CenterPoint Energy reporting electric service in Fort Bend County, our record of no utility strike in over 25 years matters around lines near Texas State Highway 36. Our family business dates to 1965, and we have drilled directionally since 1982, experience we bring to routes such as Band Road.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pleak ground like around Lake Charles soil?

The USDA soil survey maps Lake Charles soils across 43 percent of Pleak, Edna loam across 30 percent and Bernard clay loam across 8 percent. At about 40 inches below the surface, clay is mapped across 99 percent of the area, with average clay content of 50 percent. We use Lake Charles, Edna, and Bernard as mapped soil patterns, not as substitutes for site specific test borings. Lake Charles clay can hold an open hole but stick to the reamer and swell around pipe, so the crew has to manage the cut and pull timing.

USDA soil survey, inside the Pleak city limitsWhat is mapped
Soil series mappedLake Charles 43 percent, Edna 32 percent and Bernard 25 percent
Texture at the surfaceclay 43 percent, loam 30 percent and clay loam 25 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches57 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Along Ustinik Road, we do not read the lack of mapped bedrock in Pleak’s top five feet as proof deeper rock is absent. The USDA soil survey maps a seasonal water table within 40 inches across 57 percent of the area, so pits near Big Creek may need pumping. Near Big Creek, we use the mapped absence of flood prone soils as a soil map finding, not a crossing clearance. High steel corrosion risk is mapped across 99 percent, so the line owner should consider materials for steel casing and tracer wire. The Pleistocene Beaumont Formation includes sand, silt and minor gravel, with clayey fill in abandoned channels.

How do we plan a Pleak clay bore beneath Texas State Highway 36 while accounting for the mapped surface texture?

Lake Charles clay and the other mapped soils in Pleak can make the reamer sticky. We adjust the fluid and reaming sequence to the ground, then track the drill head along the planned route.

  1. Lake Charles clay is sticky and can grip the reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
  2. With clay mapped at about 40 inches across 99 percent of Pleak, we watch fluid returns to avoid pressure lifting pavement.
  3. The seasonal water table is mapped within 40 inches across 57 percent of the area, so we keep pits small and pump them if needed.
  4. Before a Big Creek route is drilled, we pothole marked utilities with hydrovac and track depth and pitch with a walkover locator.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a Pleak bore pass under Big Creek?

Texas State Highway 36 and FM 2218 run through Pleak, so a route crossing either one needs to account for state highway right of way. The longest named streets include Ustinik Road, Saddle Drive and Band Road. A bore beneath pavement can keep the surface intact, while the route and work area still need to fit the street and any nearby utilities. We check the planned path and access before setting the entry and exit pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 36State highway3.7 roadway miles insideState highway office
FM 2218State highway2 roadway miles insideState highway office
Big CreekStream1.61 channel miles insideChecked for Corps of Engineers jurisdiction
Coon CreekStream0.61 channel miles insideChecked for Corps of Engineers jurisdiction
Seabourne CreekStream0.33 channel miles insideChecked for Corps of Engineers jurisdiction
Kunz CreekStream0.02 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Pleak or within one mile, and no lakes or ponds are mapped within one mile. Big Creek runs 1.61 channel miles in town, with Coon Creek and Seabourne Creek also mapped there. Three mapped street crossings pass over named streams. Creek banks and channel crossings need a route planned for the ground and a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a Pleak bore under Texas State Highway 36?

Texas State Highway 36 and FM 2218 are state highways, so work in their right of way goes through the Texas Department of Transportation. The TxDOT Houston District reviews the utility permit. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT rules require boring or tunneling beneath existing highway pavement, with a crossing extending below all travel lanes on rural highways. Pleak city streets belong to the city. A Big Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Fort Bend County near Pleak?

The water provider for the specific address in Pleak has to be confirmed with the city, Fort Bend County or the local water district before a bore is planned. CenterPoint Energy reports electric service in the county, but that does not identify the line owner at every address. We confirm the owner before planning an electric conduit bore, then use hydrovac potholing to expose marked water and electric lines before drilling near them.

Line ownerWhat it isSourceSize
CenterPoint EnergyElectric utilities reporting service in Fort Bend CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat Pleak’s 1988 median housing year from the 2019 to 2023 five year estimates as context, not a basis for underground assumptions. We use Pleak’s housing age estimates as background for underground planning: 9 percent before 1960, 53 percent from 1960 to 1999, and 38 percent in 2000 or later. A replacement bore near Saddle Drive may meet older services alongside newer connections. We expose marked utilities on the route with hydrovac before drilling near them, since locate paint shows position but not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Pleak in relation to Rosenberg and Richmond?

Pleak is an incorporated town in Fort Bend County, with 1.82 square miles of land and an elevation of 80 feet. We check whether a Pleak boring address falls within ZIP codes 77469, 77471 or 77461 before coordinating its location. Fairchilds is 3.0 miles southeast, Rosenberg is 5.4 miles north, and Needville is 5.9 miles south. Richmond, the county seat, is 7.8 miles north. From our Yukon, Oklahoma main office, the drive to Pleak is 478 road miles and 9.5 hours, which is part of planning mobilization for a job near Texas State Highway 36.

Places near Pleak

What boring work comes up near Band Road in Pleak?

  • Highway crossing: A bore beneath Texas State Highway 36 follows the permitted route and stays below the travel lanes without cutting the pavement.
  • Street service: A water or sewer connection along Band Road can run beneath the street surface with pits set off the paved route.
  • Fiber conduit: A conduit route near Ustinik Road can avoid open cutting pavement while we expose marked utilities along the path.
  • Creek crossing: A route beneath Big Creek needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Electric conduit: Before a bore near Saddle Drive, we confirm the line owner and pothole marked electric lines with hydrovac.
  • Drainage crossing: Near Coon Creek, we plan the bore path around the channel and the access needed for entry and exit pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Pleak bore near Ustinik Road?

For a Pleak quote, start with the address or map pin, such as a point on Ustinik Road. Tell us what goes underground, whether it is a water line, sewer line, gas line, electric conduit or fiber. Add the pipe or conduit size and the footage. A sketch or plans showing a route near Big Creek or Texas State Highway 36 help us understand the crossing.

The price follows the work at the site, not footage alone. Lake Charles clay matters because sticky ground can need staged reaming and careful fluid control. Big Creek or another drainage crossing adds planning, and pavement or concrete affects the work area. Pipe size, route length, utilities to expose, pits and excavator time also shape the scope. At 478 road miles from Yukon, mobilization is part of a Pleak job, especially for a high profile or emergency schedule.

Questions people ask about boring in Pleak

Does Trinity Boring Solutions take jobs in Pleak and Fort Bend County, and who staffs them?

Yes. We take directional boring work in Pleak and across Fort Bend County. Our own crews and drilling contractors from vetted satellite yards can staff a project, while you work with Trinity from the first call through the bore log. That applies to routes along Texas State Highway 36 as well as local streets.

Who owns electric lines in Fort Bend County near Pleak, and who confirms conduit specs?

CenterPoint Energy reports electric service in Fort Bend County, but the owner at a particular Pleak address must be confirmed before a conduit bore. The line owner can confirm its conduit requirements. We pothole marked electric lines with hydrovac before drilling near them, including on a route by Band Road.

Who controls Pleak streets such as Band Road, and does a bore require cutting them?

On Ustinik Road, we account for Pleak’s incorporated status by treating its city streets as belonging to the city itself. Directional boring can pass beneath Band Road without cutting the paved surface. Entry and exit pits still need room beside the route, and marked utilities need exposure before the drill approaches them.

How old are homes and buried lines near Saddle Drive in Pleak?

Pleak’s median housing year is 1988 in the American Community Survey 2019 to 2023 estimates. That does not establish the age of a buried line along Saddle Drive, but replacement bores may serve older homes as well as newer connections. We pothole marked lines before drilling near them.

Can groundwater or flood prone ground affect a Pleak bore pit near Big Creek?

It can. The USDA soil survey maps a seasonal water table within 40 inches across 57 percent of Pleak, so a pit near Big Creek may need pumping. No flood prone soils are mapped, but the creek channel still needs a planned crossing and a jurisdiction check.

Does Lake Charles soil in Pleak corrode steel, and what pipe can a bore use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Pleak, where Lake Charles clay is the largest mapped soil area. The line owner should consider casing and tracer wire materials. HDPE is not affected by soil corrosion, and the owner selects the material for the line.

Does Trinity cover Fairchilds and rural sites outside Pleak?

Yes. We take work across Texas, including Fairchilds and rural locations outside Pleak’s town limits. A route near Rosenberg or Needville can be reviewed from its address or map pin, the line type, size and footage. The same project details help us plan access and mobilization.

How much Texas811 notice is needed for a Pleak bore along Ustinik Road?

The excavator or contractor requests a Texas811 locate for the Ustinik Road bore path at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our start slips more than 14 days past the original notice, we send a new request to the TxDOT Houston District. Before continuing work near Coon Creek, we refresh any worn or moved marks through Texas811.

What affects the cost of a Pleak bore under Texas State Highway 36?

The route, footage and pipe or conduit size all matter. Lake Charles clay can affect reaming, while a Texas State Highway 36 crossing adds permit planning. The number of utilities to expose, pavement, creek crossings, pits, excavator time and mobilization from Yukon also shape the job. We review the actual scope rather than giving a price from the road name alone.

Where the Pleak facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pleak

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pleak, Texas

Type the address of your job in Pleak. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pleak

Same county: Sugar Land · Missouri City · Fulshear · Houston · Mission Bend · Fresno · Cinco Ranch · Stafford · Pecan Grove · Richmond · Four Corners · Katy. All counties: Texas county list.