trinityboringsolutions.com

Abbott Texas Directional Boring: Austin Soil, Interstate 35 and Union Pacific

Quick Answer: Pine Street and Houston Street are among Abbott’s longest streets, and Interstate 35 runs through the city. We take directional boring, also called horizontal directional drilling (HDD), work in Abbott, Texas, including routes beneath Interstate 35. Abbott has 14.95 public road miles, and our Yukon office is 277 road miles away, with US 77 also running through town. Austin soil and silty clay can hold a bore open but stick to the reamer, so the drilling fluid and reaming pace matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Abbott bores at a glance

  • Incorporated city in Hill County, Texas. Population 370 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 277 miles, about 5.3 hours of driving.
  • Ground: Austin soil is mapped on 36 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 77 percent of the area.
  • Highways inside the boundary: Interstate 35, US 77, FM 1242 and FM 1304. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Cottonwood Creek and Alligator Creek.
  • Public water: City of Abbott, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Abbott near Union Pacific track?

We take directional boring work in Abbott, Hill County, where the Census Bureau Vintage 2024 estimate puts the population at 370. We install water, sewer, gas, electric conduit and fiber lines, including routes along Pine Street or beneath Interstate 35 when the plans call for it. Each route is scoped to the line and the crossings it needs to pass.

Our main office is in Yukon, Oklahoma, and Abbott work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike, a record that matters around the City of Abbott groundwater system and the electric providers reporting in Hill County. Our family business began in 1965, and we have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Abbott ground like in Austin soil?

The USDA soil survey maps Austin soil across 36% of Abbott, Eddy across 24%, Houston Black across 20%, and Stephen across 12%. Surface texture is mainly silty clay at 49% and clay at 25%, with very gravelly clay loam at 24%. At about 40 inches, the survey maps bedrock under 72% of the area and clay under 25%; average clay content there is 54%. Those are mapped soil patterns, not test borings. Clay can hold the hole open, but it can also cling to the reamer and grip pipe.

USDA soil survey, inside the Abbott city limitsWhat is mapped
Soil series mappedAustin 36 percent, Eddy 24 percent, Houston Black 20 percent, Stephen 12 percent and Ferris 4 percent
Texture at the surfacesilty clay 49 percent, clay 25 percent and very gravelly clay loam 24 percent
Texture about 40 inches downbedrock 72 percent and clay 25 percent
Engineering class about 40 inches downfat clay (CH) 25 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches77 percent of the area (0 percent hard rock, 77 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel74 percent of the area

The USDA soil survey puts typical bedrock depth at 21 inches and maps bedrock within 60 inches across 77% of Abbott; the mapped bedrock is weathered, not hard. Austin Chalk, a Late Cretaceous unit, is described as chalk and marl, so a hard soil bit may work but progress can be slower than in dirt. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 1%. High steel corrosion risk is mapped across 74%, so the line owner should weigh casing and tracer wire materials; HDPE does not share that steel concern.

How do we bore Abbott ground with bedrock mapped nearby?

Austin soil and the mapped Austin Chalk call for a plan that accounts for sticky clay and weathered rock. Along Pine Street or near Interstate 35, we track the drill head from the surface and log depth and pitch as the bore advances.

  1. Austin soil has plenty of clay, which can ball up on the reamer; we use a thinner fluid mix and staged reaming to limit buildup.
  2. Where Austin Chalk is encountered, we allow for slower progress through weathered rock and watch the soil to rock transition for steering changes.
  3. Near an Interstate 35 route, we manage fluid returns carefully so pressure does not lift pavement, and we keep the bore below the required grade.
  4. Before drilling near a marked Pine Street utility, we pothole to expose it; surface marks show position, not depth, so the line needs to be seen.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What might a bore cross in Abbott near Pine Street?

Interstate 35 and US 77 each have 1.7 mapped roadway miles inside Abbott, while FM 1242 has 1.0 and FM 1304 has 0.1. Pine Street is the longest named street at 1.18 miles, followed by Houston Street at 0.71 and Willie Nelson Road at 0.58. The highway routes call for attention to right of way limits and pavement, while a street bore can pass below the surface without cutting the road.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate1.7 roadway miles insideState highway office
US 77US highway1.7 roadway miles insideState highway office
FM 1242State highway1 roadway miles insideState highway office
FM 1304State highway0.1 roadway miles insideState highway office
Union PacificRailroad0.37 track miles insideThe railroad
Cottonwood CreekStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Alligator CreekStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
Cobb CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Brookeen CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 0.37 track miles in Abbott on the Fort Worth Subdivision, and public mapping shows 2 street and rail crossings inside the city. A route beneath the track needs the railroad’s crossing agreement. Cottonwood Creek runs 0.13 channel miles in town, and Alligator Creek runs 0.1; no street crossings of named streams are mapped. Creek work still needs planning for possible federal jurisdiction.

Who approves Abbott bores in Hill County?

Interstate 35, US 77, FM 1242 and FM 1304 are state highway routes, so work in their right of way needs a TxDOT utility permit reviewed by the Waco District. The line owner files through RULIS, and we prepare the bore plan and profile for that application. Required cover depends on the line: for example, water needs 60 inches at a highway crossing, while electric and communication lines need 60 inches below the lowest crossed grade. Abbott’s city streets belong to the city. A Union Pacific crossing also needs its railroad agreement, and Cottonwood Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Abbott system?

The City of Abbott public water system uses groundwater wells and reports 203 service connections serving 406 people. Electric providers reporting service in Hill County are Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. We confirm which company owns the line before planning an electric conduit bore along Pine Street or another Abbott route.

Line ownerWhat it isSourceSize
City of AbbottPublic water systemGroundwater wells203 connections, 406 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Hill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Abbott’s median housing year at 1971; 35% of homes were built before 1960, 48% from 1960 to 1999 and 17% in 2000 or later. A job on Houston Street could involve an older service or a newer connection, so we expose marked utilities before drilling near them. Hydrovac potholing shows the line itself; paint on Pine Street marks position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Abbott in relation to Bynum and Hillsboro?

Abbott is an incorporated city in Hill County, covering 0.59 square miles at an elevation of 711 feet. Its ZIP code is 76621. West is 5.8 miles south, Bynum is 7.1 miles northeast, and Aquilla and Penelope are each 8.8 miles away, west and east respectively. Hillsboro, the county seat and nearest larger city, is 8.8 miles north. The Yukon yard is 277 road miles away, a drive of 5.3 hours, which is part of planning crew and equipment mobilization for Abbott work.

Places near Abbott

What boring work comes up on Willie Nelson Road in Abbott?

  • Highway crossing: A route beneath Interstate 35 or US 77 must account for highway pavement, right of way and the required cover.
  • Water service: A new connection near the City of Abbott system needs a planned route around the mapped utilities on its street.
  • Fiber conduit: A run along Pine Street can pass beneath the pavement, with marked lines exposed before the drill approaches.
  • Creek crossing: A Cottonwood Creek route needs depth planning beneath the channel and a check for Corps jurisdiction.
  • Rail crossing: A bore beneath the Union Pacific Fort Worth Subdivision needs the railroad’s agreement for the crossing.
  • Street service: A bore near Willie Nelson Road can avoid an open cut across the road while connecting a nearby line.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote Abbott work near Cottonwood Creek?

For a bore near Cottonwood Creek, start with the address or map pin, then tell us what will go underground, such as water or fiber. Give the pipe or conduit size and the footage, whether the route follows Pine Street or crosses a creek. A sketch or plans help us see the route and the nearby crossings.

Price follows the route and the work it takes, with Austin soil and weathered bedrock first in the review because they can affect reaming and pace. We also consider pipe size and length, utilities to expose, pavement or concrete, pits and backfill, and creek crossings such as Cottonwood Creek. A route near Interstate 35 or Union Pacific track adds crossing details to plan, and the 277 road miles from Yukon affect mobilization.

Questions people ask about boring in Abbott

Does Trinity take directional boring work in Abbott and Hill County?

Yes. We take work in Abbott and across Texas, with crews of our own or vetted drilling partners supporting the job. Our main office is in Yukon, and you work with Trinity from the first call through the bore log, including when a route follows Pine Street or crosses another local feature.

Is there rock under Abbott, and how much bedrock is mapped?

The USDA soil survey maps bedrock within 60 inches across 77% of Abbott, with typical depth at 21 inches. It maps weathered bedrock rather than hard bedrock in that depth range. Austin Chalk is also mapped in the area, so a bore may slow where chalk is encountered.

Who approves an Abbott bore beneath Interstate 35?

For work in the Interstate 35 right of way, the utility owner applies for a TxDOT permit through RULIS, and the TxDOT Waco District reviews it. We prepare the bore plan and profile for the owner’s application. The permit sets the approved route and required cover for the line.

What does an Abbott bore under Union Pacific track require?

Union Pacific owns the 0.37 track miles mapped in Abbott. A bore beneath its track requires a crossing agreement from the railroad, which sets the crossing conditions, including casing, depth and flagging. The route and bore plan need to account for those requirements before work begins.

Can a line be bored beneath Cottonwood Creek in Abbott?

A bore beneath Cottonwood Creek can be planned, but the route must account for the channel and be checked for possible Corps jurisdiction. The creek has 0.13 channel miles mapped inside Abbott. Planning the depth and entry points helps keep the channel and its banks uncut.

Who runs Abbott’s public water system, and where does its water come from?

The City of Abbott owns the public water system, which draws from groundwater wells. Public records report 203 service connections and 406 people served. For a new line near the system, the specific route and utility locations still need to be checked before drilling.

Can I reach Trinity after hours about an urgent bore on Willie Nelson Road in Abbott?

Yes. Someone answers Trinity’s phone 24 hours a day at (405) 409-7423, including for urgent work near Willie Nelson Road. We can discuss the location, what line is involved and the conditions around the route before determining the next steps.

How early should I request an Abbott locate for work near Pine Street?

Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from the planned start near Pine Street; Texas811 describes that as two working days. The notice cannot be more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of an Abbott bore near Interstate 35?

The route, pipe size and length matter, as do Austin soil and weathered bedrock, which can affect the drilling pace. Utilities to expose, pavement, pits, backfill and any creek or railroad crossing also shape the work. A route near Interstate 35 needs highway planning, and mobilization reflects Abbott’s 277 road miles from Yukon.

Where the Abbott facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Abbott

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Abbott, Texas

Type the address of your job in Abbott. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Abbott

Same county: Whitney · Itasca · Hubbard · Blum · Mount Calm · Covington · Malone · Carl's Corner · Mertens. All counties: Texas county list.