Caddo Mills Texas Directional Boring: Wilson Soil, Interstate 30 and West Caddo Creek
Quick Answer: Gilmer Street, 1st Street and Greenville Street are among Caddo Mills’ longest streets, and Interstate 30 runs through the city. We do directional boring, also called horizontal directional drilling (HDD), for crossings such as Interstate 30. Caddo Mills has 34.71 public road miles, and its Dallas, Garland and Northeastern Railroad tracks create another crossing to plan around. Wilson soil and heavy clay are the main ground concerns; sticky cuttings can load a reamer, so we manage drilling fluid and ream in stages.
Caddo Mills bores at a glance
- Incorporated city in Hunt County, Texas. Population 5,257 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 239 miles, about 4.8 hours of driving.
- Ground: Wilson soil is mapped on 35 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 17 percent of the area.
- Highways inside the boundary: Interstate 30, Texas State Highway 66, US 67, FM 36 and FM 1565. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Dallas, Garland and Northeastern Railroad, with 6 mapped street and rail crossings.
- Named streams inside the boundary: West Caddo Creek, Elm Creek and Brushy Creek.
- Public water: City of Caddo Mills, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Gilmer Street in Caddo Mills?
We take directional boring work across Caddo Mills and Hunt County. The Census Bureau Vintage 2024 estimate puts the city population at 5,257, with Gilmer Street and FM 36 among the routes where a project may need a new line. We install water, sewer, gas, electric conduit and fiber, with the route and line type shaping the bore plan.
Our main office is in Yukon, Oklahoma, and Caddo Mills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a Gilmer Street service, our range runs from 3/4 inch lines to 48 inch casing and bores from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982.

What is Wilson soil like to bore in Caddo Mills?
The USDA soil survey maps Wilson silt loam across 35% of Caddo Mills, with Leson clay at 20% and Crockett loam at 15%. Surface texture is mapped as clay across 48% of the city and silt loam across 35%. At about 40 inches below the surface, the mapped texture is clay throughout the area, with average clay content of 49%. These are mapped patterns, not test borings. In the heavy clay, sticky cuttings can collect on the reamer and the soil can grip pipe as it swells.
| USDA soil survey, inside the Caddo Mills city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 35 percent, Leson 20 percent, Crockett 16 percent, Burleson 10 percent and Kaufman 8 percent |
| Texture at the surface | clay 48 percent, silt loam 35 percent and loam 16 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 98 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 17 percent of the area (0 percent hard rock, 17 percent weathered rock) |
| Seasonal water table within 60 inches | 35 percent of the area |
| Flood prone soils | 8 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 17% of Caddo Mills; hard bedrock is not mapped at that depth. A seasonal water table is mapped within 60 inches across 35%, so pits near West Caddo Creek may need pumping. Flood prone soils cover 8% of the mapped area. High steel corrosion risk is mapped across the city, a concern for casing and tracer wire that the line owner should address. The Neylandville Marl, a Late Cretaceous unit of clay, calcareous silt and sand, can mean changing material along a route.
How do we drill through clay in Caddo Mills?
Clay covers much of Caddo Mills, and the survey maps heavy clay at about 40 inches. On a route near Wilson soil or West Caddo Creek, we adjust fluid, reaming and pit plans to the ground in front of the drill.
- For Wilson soil with heavy clay, we use a thinner drilling fluid and polymer, then enlarge the hole in stages so sticky cuttings do not build up on the reamer.
- Where the route follows silt loam near Gilmer Street, we keep fluid pressure low beneath pavement because wet silt can soften steering and wash out.
- With seasonal water table soils mapped near West Caddo Creek, we plan smaller entry and exit pits and pump them if water collects.
- Before drilling near a marked utility on 1st Street, we hydrovac expose it; a surface mark gives position, not depth, so we verify the line below ground.

What does a bore have to cross near Interstate 30 in Caddo Mills?
Interstate 30 has 0.2 mapped roadway miles inside Caddo Mills, while FM 36 has 5.7 and Texas State Highway 66 has 3.0. US 67, FM 1565, FM 1903 and FM 6 also run within the limits. Gilmer Street is the longest named street at 1.45 miles, followed by 1st Street at 0.74 miles and Greenville Street at 0.46 miles. A bore under existing highway pavement uses boring or tunneling rather than opening the road surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 30 | Interstate | 0.2 roadway miles inside | State highway office |
| Texas State Highway 66 | State highway | 3 roadway miles inside | State highway office |
| US 67 | US highway | 0.2 roadway miles inside | State highway office |
| FM 36 | State highway | 5.7 roadway miles inside | State highway office |
| FM 1565 | State highway | 4 roadway miles inside | State highway office |
| FM 1903 | State highway | 2 roadway miles inside | State highway office |
| FM 6 | State highway | 1 roadway miles inside | State highway office |
| Dallas, Garland and Northeastern Railroad | Railroad | 2.56 track miles inside | The railroad |
| West Caddo Creek | Stream | 2.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Elm Creek | Stream | 0.38 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brushy Creek | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Gates Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| East Caddo Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Payne Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
The Dallas, Garland and Northeastern Railroad has 2.56 track miles in Caddo Mills, and public records map 6 street and rail crossings in the city. West Caddo Creek runs 2.03 channel miles here; Elm Creek and Brushy Creek are also mapped. Two street crossings of named streams are mapped. City Lakes is a 6 acre lake inside the limits, so a route near the water needs crossing review during planning.
Who approves a bore on Caddo Mills roads in Hunt County?
Interstate 30, US 67, Texas State Highway 66 and the FM roads in Caddo Mills fall under TxDOT right of way permitting. The TxDOT Paris District reviews the utility permit, and the utility owner files through the online RULIS system; we supply the bore plan and profile and work under that owner’s permit. City streets such as Gilmer Street belong to the incorporated city. A crossing of the Dallas, Garland and Northeastern Railroad needs an agreement from the railroad owner. West Caddo Creek and other water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Caddo Mills water system?
The City of Caddo Mills public water system uses purchased surface water and reports 2,466 service connections serving 4,688 people. Electric service reporting in Hunt County includes Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. Those reports do not identify the provider at every address, so the line owner is confirmed before planning an electric conduit bore near FM 36 or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Caddo Mills | Public water system | Surface water bought from another system | 2,466 connections, 4,688 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Hunt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates give Caddo Mills a median housing year of 1985: 20% of homes were built before 1960, 48% from 1960 to 1999 and 32% in 2000 or later. A replacement bore near 1st Street may need to connect older service with newer lines, so we check the actual route instead of assuming the buried layout. Hydrovac potholing exposes marked utilities before drilling near them; paint shows position, not depth.

Where is Caddo Mills in relation to Greenville and Yukon?
Caddo Mills is an incorporated city entirely in Hunt County, with 5.16 square miles of land and an elevation of 542 feet. Its ZIP code is 75135. Josephine is 5.3 miles west, and Greenville is 7.2 miles east; Greenville is also the county seat and nearest larger city. Royse City lies 8.5 miles southwest. From our Yukon, Oklahoma yard, Caddo Mills is 239 road miles away, a 4.8 hour drive, which factors into mobilization for a bore near FM 1565 or West Caddo Creek.
Places near Caddo Mills
- Directional boring in Josephine: 5.3 miles west
- Directional boring in Greenville: 7.2 miles east
- Directional boring in Royse City: 8.5 miles southwest
- Directional boring in Nevada: 8.8 miles west
- Directional boring in Union Valley: 8.9 miles south
What boring work comes up near West Caddo Creek in Caddo Mills?
- Highway crossing: A bore beneath Interstate 30 avoids cutting the pavement, with the route and cover planned for the highway crossing.
- Water service: A connection near the City of Caddo Mills system can use a bore to reach a property without opening the surface along FM 36.
- Fiber route: A conduit bore along Gilmer Street can pass beneath pavement and marked utilities, with each line exposed before drilling nearby.
- Creek crossing: A route beneath West Caddo Creek keeps the channel and banks uncut, with water jurisdiction checked during planning.
- Rail crossing: A bore beneath the Dallas, Garland and Northeastern Railroad requires an agreement with the track owner before the crossing is planned.
- Park service: A line near Hanchey Park can be routed with entry and exit pits placed in dirt rather than cutting a sidewalk or driveway.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for directional boring on Joshua Street in Caddo Mills?
For a route along Joshua Street, start with the address or a map pin, then tell us what is going underground, such as water or fiber. Give the pipe or conduit size and estimated footage, whether the route approaches Greenville Street or a highway, and include a sketch or plans if available. Those details help us check the route and likely crossings.
Wilson soil and heavy clay matter first because sticky cuttings and swelling can change fluid use and reaming. Next, the number of marked utilities to expose, pavement or concrete, and crossings of Interstate 30, railroad tracks or West Caddo Creek affect the work. Pit size, excavator time and sand backfill also count. Mobilization matters on a Caddo Mills job 239 road miles from Yukon, and high profile or emergency timing can add planning needs.
Questions people ask about boring in Caddo Mills
Does Trinity take directional boring jobs in Caddo Mills and Hunt County, and who staffs them?
Yes. We take work in Caddo Mills and across Hunt County, with our own crews and partner drilling contractors from satellite yards. The Yukon main office coordinates the project from the first call through the bore log, so the customer has one point of contact even if a partner crew is on site.
Who owns electric lines in Caddo Mills, Hunt County, and who confirms conduit specs?
Hunt County electric service reporting lists Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. The provider can vary by address. We confirm the line owner for a proposed conduit bore near Gilmer Street before planning around its specifications.
Who is responsible for Greenville Street in Caddo Mills, and does a bore require cutting it?
Greenville Street is a city street because Caddo Mills is incorporated. A directional bore can pass below the street without opening its surface, with pits placed in dirt on either side. Marked utilities on the route still need exposure before drilling near them.
What do Caddo Mills homes near 1st Street mean for replacement bores?
The American Community Survey 2019 to 2023 estimates give Caddo Mills a median housing year of 1985, with 20% of homes built before 1960. Older and newer services may share a route near 1st Street, so we check the actual buried lines and pothole marked utilities before drilling.
Can groundwater or flood prone soil affect bore pits near West Caddo Creek in Caddo Mills?
It can. The USDA soil survey maps a seasonal water table within 60 inches across 35% of Caddo Mills and flood prone soils across 8%. Near West Caddo Creek, we plan pit placement and depth around water conditions and pump pits if water collects.
Does Wilson soil in Caddo Mills create a steel corrosion concern, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across Caddo Mills, including areas mapped as Wilson silt loam. The line owner selects suitable coatings for steel casing or tracer wire. HDPE is another option for a line, depending on the project specifications.
Does Trinity cover Josephine and rural sites outside Caddo Mills?
Yes. We take work in Josephine, which is 5.3 miles west of Caddo Mills, and at rural sites outside the city limits. The route, access and line type determine the bore plan, including whether a project near West Caddo Creek or FM 36 needs special crossing coordination.
How much Texas811 notice is needed for a Caddo Mills bore near Gilmer Street, and what if marks fade?
Paint near Gilmer Street shows a utility’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips beyond that period or marks wear off or move, a new request or refreshed marks are needed before work continues.
What affects the cost of a directional bore under Interstate 30 in Caddo Mills?
The bore length and pipe or conduit size matter, along with Caddo Mills’ heavy clay and the number of utilities that must be exposed. Pavement, Interstate 30 or railroad crossings, creek work, pits and backfill also change the scope. Mobilization from Yukon matters because the city is 239 road miles from our yard.
Where the Caddo Mills facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Caddo Mills
- U.S. Census Bureau, TIGER/Line 2024: Caddo Mills boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Caddo Mills
- U.S. Census Bureau, American Community Survey 2019 to 2023: Caddo Mills housing units and year built
- Macrostrat geologic map compilation: map units under Caddo Mills
- U.S. EPA Safe Drinking Water Information System: public water systems serving Caddo Mills
- U.S. Department of Transportation, North American Rail Network: track owners in Hunt County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hunt County
- U.S. Geological Survey, Elevation Point Query Service: Caddo Mills elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Caddo Mills
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Caddo Mills
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Caddo Mills, Texas
Type the address of your job in Caddo Mills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Caddo Mills
Same county: Commerce · West Tawakoni · Quinlan · Wolfe City · Poetry · Celeste · Lone Oak · Campbell · Hawk Cove · Neylandville. All counties: Texas county list.
