trinityboringsolutions.com

Blum Texas Directional Boring: Bolar Soil, FM 933 and Nolan River

Quick Answer: The City of Blum water system uses groundwater wells, and Hill County electric providers must be checked before a conduit bore near Farm Road 933. We do directional boring, also called horizontal directional drilling (HDD), for routes such as crossings near Nolan River. Blum is 257 road miles from our Yukon yard, a distance that affects mobilization for work near FM 67. Bolar soil and heavy clay can grip a reamer, so the drilling fluid and reaming sequence matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Blum bores at a glance

  • Incorporated city in Hill County, Texas. Population 408 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 257 miles, about 5.2 hours of driving.
  • Ground: Bolar soil is mapped on 27 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 45 percent of the area.
  • Highways inside the boundary: FM 933 and FM 67. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Nolan River.
  • Public water: City of Blum, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Farm Road 933 in Blum?

The City of Blum public water system draws from groundwater wells, and the electric line owner must be confirmed before we plan a conduit bore near Farm Road 933. The Census Bureau Vintage 2024 estimate puts Blum’s population at 408. We install water, sewer, gas, electric conduit and fiber, including replacement routes along Avenue C or new services near 4th Street.

Our main office is in Yukon, Oklahoma, and Blum work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. That shows our reach; a typical Blum route near FM 933 is much shorter and has its own clay, access and utility crossings to plan around.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a Blum bore meet in Bolar soil?

The USDA soil survey maps Bolar soil across 27 percent of Blum, with Aledo, Krum and Venus also common. Surface textures include clay loam across 37 percent and silty clay across 15 percent. At about 40 inches below the surface, bedrock is mapped across 33 percent, while silty clay covers 27 percent and average clay content is 41 percent. For a Blum bore, we treat these mapped patterns as planning context, not as test borings. A route near Nolan River still needs site specific planning because clay can cling to the reamer and swell around pipe.

USDA soil survey, inside the Blum city limitsWhat is mapped
Soil series mappedBolar 27 percent, Aledo 17 percent, Krum 15 percent, Venus 14 percent and Tinn 12 percent
Texture at the surfaceclay loam 37 percent, gravelly clay loam 17 percent and silty clay 15 percent
Texture about 40 inches downbedrock 33 percent, silty clay 27 percent and clay loam 14 percent
Engineering class about 40 inches downfat clay (CH) 38 percent and lean clay (CL) 23 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches45 percent of the area (33 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils19 percent of the area
High corrosion risk for uncoated steel41 percent of the area

Bedrock is mapped within 60 inches across 45 percent of Blum: hard bedrock across 33 percent and weathered bedrock across 12 percent. The USDA map also shows no seasonal water table within 60 inches, while flood prone soils cover 19 percent near features such as Nolan River. Across Blum, we account for the mapped high steel corrosion risk covering 41 percent when planning buried boring materials. The Washita Group, an undivided Cretaceous unit, includes thick clay and thin limestone. That mix can slow drilling at rock and clay contacts; the line owner should consider steel casing and tracer wire materials.

How do we bore through Blum bedrock and clay?

The USDA soil survey points to clay, shallow mapped bedrock and flood prone ground around Nolan River. We match the tooling and fluid to the route, then track the drill head as it advances.

  1. In Bolar clay, we use a thinner drilling fluid with polymer and open the hole in stages, then pull pipe the day the bore is opened.
  2. Where hard bedrock is mapped near 40 inches, we allow for slower drilling and adjust tooling as the route moves from clay into rock.
  3. Along flood prone ground near Nolan River, we plan the bore depth below the channel and check whether the crossing falls under Corps jurisdiction.
  4. We hydrovac pothole each marked utility on the bore path before drilling near it; a marked line under Avenue C must be exposed to confirm its depth.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Blum bore cross near BNSF Railway?

FM 933 and FM 67 run through Blum, while Texas State Highway 174 is 0.9 miles beyond the town limits. A state highway route needs its own cover and permit plan. Farm Road 933 is the longest named street at 1.12 miles in town; Avenue C runs 1.0 mile and 4th Street runs 0.98 miles. Those streets give a coordinator useful route references, but the bore path still needs to be checked against pavement, driveways and buried lines.

CrossingTypeMapped extentWho has a say
FM 933State highway1.1 roadway miles insideState highway office
FM 67State highway0.5 roadway miles insideState highway office
Texas State Highway 174Highway nearby0.9 miles outsideState highway office
BNSF RailwayRailroad nearby0.2 miles outsideThe railroad
Nolan RiverStream1.12 channel miles insideChecked for Corps of Engineers jurisdiction
Belnap CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Darr BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway is 0.2 miles outside Blum, and no railroad runs inside the town limits. No mapped street and rail crossings are recorded inside town, but a proposed route that reaches the BNSF line still needs railroad coordination. Nolan River runs 1.12 channel miles through Blum, with one mapped street crossing of a named stream. For Blum boring, our map shows no lakes or ponds within one mile, informing water constraint review. A creek route needs depth planning and a check for federal water jurisdiction.

Do I need a permit for a Blum bore in Hill County?

FM 933 and FM 67 are state farm to market roads, so work in their right of way needs a TxDOT utility permit reviewed by the Waco District. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. The utility owner files in TxDOT’s RULIS system, using our bore plan and profile. Texas State Highway 174 is also subject to TxDOT review if the route enters its right of way. City streets such as Avenue C belong to the incorporated town. A crossing of BNSF Railway needs an agreement with the railroad, and a Nolan River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Blum water system?

The City of Blum public water system uses groundwater wells and reports 248 service connections serving 444 people. That network may affect service replacement routes near 4th Street, so we confirm marked lines before drilling. Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative report electric service in Hill County. Those county records do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of BlumPublic water systemGroundwater wells248 connections, 444 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Hill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Blum’s 1985 median housing year from the American Community Survey 2019 to 2023 five year estimates as neighborhood context, not a locator for buried utilities. It estimates 24 percent of homes were built before 1960, 51 percent from 1960 to 1999 and 25 percent in 2000 or later. A replacement bore near Avenue C may follow older buried services, while newer connections may call for a different route. On Blum bore paths, we hydrovac pothole every marked utility before drilling nearby; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Blum and nearby Rio Vista?

Blum is an incorporated town in Hill County, at an elevation of 594 feet, with 0.99 square miles of land and ZIP code 76627. Rio Vista is 6.5 miles north, Kopperl is 7.8 miles southwest and Covington is 8.4 miles east. Cleburne is the nearest larger city, 14.7 miles north; Hillsboro, the county seat, is 18.9 miles southeast. Our Yukon yard is 257 road miles away, a 5.2 hour drive, so that distance is part of planning work near FM 933.

Places near Blum

What kinds of bores come up near Blum’s 4th Street?

  • Water service: A connection near the City of Blum water system may need a route past existing lines along 4th Street.
  • Highway crossing: A bore beneath FM 933 needs a route and cover plan suited to the state road right of way.
  • Street replacement: A new water or sewer line along Avenue C can pass beneath pavement instead of cutting across the street.
  • Creek crossing: A route beneath Nolan River needs channel depth planning and a jurisdiction check during design.
  • Rail crossing: A proposed route approaching BNSF Railway needs coordination with the railroad before the crossing is planned.
  • Fiber route: A conduit bore along Farm Road 933 can connect services while avoiding open cuts through pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Blum bore near Nolan River?

For a quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help us read the route near Nolan River. A marked map of a crossing on FM 933 can also show where pavement, utilities or drainage shape the bore path.

The route and site conditions set the work. Bolar clay can build up on a reamer, and mapped bedrock may slow the cut or change tooling. A crossing of FM 933 brings TxDOT cover and right of way planning; a route near BNSF Railway or Nolan River adds crossing coordination. Pavement, exposed utilities, pit work and excavator time also affect the plan. Blum’s 257 road miles from Yukon can affect mobilization.

Questions people ask about boring in Blum

Does Trinity take directional boring work in Blum and Hill County?

Yes. We take directional boring work in Blum and across Texas, with our own crews and partner contractor satellite yards that we have vetted. You work with Trinity from the first call through the bore log, whether the route is near Farm Road 933 or elsewhere in Hill County.

How do older Blum homes near Avenue C affect a replacement bore?

Blum’s median housing year is 1985, and the American Community Survey estimates 24 percent of homes were built before 1960. An older service near Avenue C may be replaced along a route with existing utilities, while a newer connection can have different tie in points. We expose marked lines before the drill approaches.

Can Nolan River flood prone ground cause problems for Blum bore pits?

It can affect pit placement and bore depth. Flood prone soils are mapped across 19 percent of Blum, and Nolan River runs through town. The soil survey does not map a seasonal water table within 60 inches, but the creek setting still calls for planning pits away from vulnerable ground and checking the crossing during design.

Does Bolar soil in Blum create a corrosion concern for steel pipe?

The mapped concern is soil corrosion risk, not Bolar soil alone: high steel corrosion risk covers 41 percent of Blum. The line owner should decide on casing and tracer wire materials for a route near Bolar soil. HDPE is not affected by soil corrosion, but the specified pipe depends on the line and owner requirements.

What is Bolar soil like for a directional bore in Blum?

The USDA soil survey maps Bolar soil across 27 percent of Blum, and clay loam is the leading surface texture at 37 percent. About 40 inches down, silty clay is mapped across 27 percent and average clay content is 41 percent. Sticky clay can gather on the reamer, so fluid and reaming need to suit the ground.

Is bedrock mapped near the surface on Blum bore routes?

Yes. The USDA soil survey maps bedrock within five feet across 45 percent of Blum, including hard bedrock across 33 percent and weathered bedrock across 12 percent. A route may change from clay to rock, which can slow drilling and affect the tool choice. A site review is needed for the actual bore path.

Can I reach Trinity after hours about an urgent bore near 4th Street in Blum?

Yes. For Blum callers, a person answers Trinity’s phone 24 hours a day at (405) 409-7423 to discuss boring plans. For an urgent issue near 4th Street, tell us what line is involved and where the work is needed so we can understand the scope and response required.

How early should I call Texas811 for a Blum bore along Farm Road 933?

The line owner or excavator makes the Texas811 request for a bore along Farm Road 933 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Blum start, if work moves more than 14 days past the original notice, we make a new request. On Blum bore sites, we have worn or moved marks refreshed before work continues.

What affects the price of directional boring in Blum near FM 933?

The price depends on the route and scope, not a single standard rate. For a bore near FM 933, the pipe size and length, clay or bedrock, pavement, utility crossings, pits and excavator time all matter. Creek work near Nolan River and mobilization from Yukon can also change what the job requires.

Where the Blum facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Blum

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Blum, Texas

Type the address of your job in Blum. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Blum

Same county: Hillsboro · Hubbard · Abbott · Mount Calm · Malone · Carl's Corner · Penelope · Bynum · Mertens · Aquilla. All counties: Texas county list.