Kopperl Texas Directional Boring: Bastrop Soil, FM 1859 and Plowman Creek
Quick Answer: Can we get a line beneath FM 1859 without cutting its surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Kopperl crossings. The Yukon, Oklahoma main office is 267 road miles from Plowman Creek, so distance can affect mobilization. Bastrop soil is common here, and sandy clay loam deeper down can grip the pipe. We plan the bore around the ground and the marked utilities.
Kopperl bores at a glance
- Unincorporated community in Bosque County, Texas. Population 164 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 267 miles, about 5.4 hours of driving.
- Ground: Bastrop soil is mapped on 71 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: FM 1859. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Plowman Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near FM 1859 in Kopperl?
Can we put your line beneath a Kopperl road without cutting it? Yes, we take directional boring work in Bosque County, including routes near FM 1859 and Farm Road 56. The Census Bureau counted 164 people in Kopperl in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, with the route and bore plan set for the specific street or crossing.
Our main office is in Yukon, Oklahoma, and Kopperl work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa. Against that reach, a Kopperl bore beneath FM 1859 is a smaller crossing, planned for its specific ground and utilities. We have done directional boring since 1982, as a family business started in 1965.

What does Bastrop soil mean for a bore in Kopperl?
The USDA soil survey maps Bastrop soil series across 71 percent of Kopperl. Bastrop fine sandy loam on 1 to 3 percent slopes covers 61 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped under 71 percent, and the mapped average clay content there is 28 percent. These are soil survey patterns, not test borings. Clay can cling to a reamer and tighten around pipe, so the actual bore plan has to account for the conditions along its route.
| USDA soil survey, inside the Kopperl mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Bastrop 71 percent, Minwells 11 percent, Cranfill 8 percent, Slidell 5 percent and Hassee 4 percent |
| Texture at the surface | fine sandy loam 86 percent, gravelly clay loam 8 percent and clay 5 percent |
| Texture about 40 inches down | sandy clay loam 71 percent, clay loam 11 percent and clay 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 83 percent, fat clay (CH) 9 percent and silty gravel (GM) 8 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (1 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 9 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 1 percent of Kopperl, so it is not mapped in the top five feet across most of the community. A seasonal water table within 60 inches is mapped in 4 percent; pits there may need pumping. Flood prone soils are not mapped. High steel corrosion risk is mapped in 9 percent, so the line owner should address casing or tracer wire protection. The mapped geology includes Quaternary terrace deposits and Early Cretaceous sedimentary rock, which can mean mixed sand, clay, gravel or rock conditions along a bore.
How do we bore Kopperl’s sandy clay loam?
Kopperl’s sandy clay loam at about 40 inches can hold an open hole and grip pipe. We match drilling fluid and reaming to the soil along the planned route, including Bastrop soil areas.
- In Bastrop soil, sticky clay can build on the reamer and grip pipe. We use drilling fluid suited to the ground and stage the reaming rather than opening the full hole at once.
- Where the Kopperl soil survey maps fine sandy loam over sandy clay loam, we watch for loose material behind the bit and have the pipe ready for the final pass.
- Before drilling near a marked line by 8th Avenue, we hydrovac pothole to expose it; surface paint locates a line but does not show its depth.
- Along Plowman Creek, we track the drill head from the surface and log depth and pitch, shaping the route to the creek and the marked utilities.

Where might a bore pass under Farm Road 56 in Kopperl?
FM 1859 is the state highway mapped inside Kopperl, with 0.1 roadway miles in the community. Farm Road 56 is the longest named street, at 0.57 miles. Plowman Creek Park Road runs 0.37 miles, and 8th Avenue runs 0.14 miles. A bore under these streets can keep pavement intact, while the exact route and depth depend on the line, utilities and road authority. No other state or US highway is mapped within 1.5 miles outside the community boundary.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1859 | State highway | 0.1 roadway miles inside | State highway office |
| BNSF Railway | Railroad nearby | 0 miles outside | The railroad |
| Plowman Creek | Stream | 1.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brazos River | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Phelps Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Raymond Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway runs along or touches the mapped community boundary, but no railroad is mapped inside Kopperl, and none of the mapped streets has a street and rail crossing. Plowman Creek runs 1.03 channel miles through the community, where one street crossing of a named stream is mapped. The Brazos River is 0.2 miles outside the boundary. A creek route needs site planning for its channel and a check for federal waterway jurisdiction.
Who approves a bore near FM 1859 in Bosque County in Kopperl?
Kopperl is an unincorporated community, not a city with its own government, so street approvals belong to Bosque County or the state according to the road. FM 1859 is a state highway. A utility crossing its right of way needs a TxDOT utility permit reviewed by the TxDOT Waco District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. A crossing beneath BNSF Railway also needs an agreement with the railroad, and a Plowman Creek route is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is known about utility lines in Bosque County near Kopperl?
The water provider for a specific Kopperl address could not be matched from EPA drinking water records. Confirm it with Bosque County or the local water district before planning a bore. Utilities reporting electric service in Bosque County are Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. The line owner at the address must be confirmed before an electric conduit bore, since the county list does not identify the provider for each street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Bosque County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Kopperl’s median housing year at 1973; 35 percent of housing units were built before 1960, and 65 percent from 1960 to 1999. That age mix can mean a project is replacing an older line or adding a newer service, and the route needs checking either way. For a proposed conduit under Farm Road 56, hydrovac potholes expose each marked utility before the drill approaches; paint shows position, not depth.

How far is Kopperl from Morgan and our Yukon office?
Kopperl is in Bosque County, at an elevation of 566 feet, and covers 0.54 square miles within its mapped community boundary. Its ZIP code is 76652. Morgan is 7.3 miles southwest, and Blum is 7.8 miles northeast; Meridian, the county seat, is 13.2 miles southwest. Cleburne is 20.4 miles north. The Yukon, Oklahoma main office is 267 road miles away, a drive of 5.4 hours, which can affect crew mobilization for a Kopperl job.
Places near Kopperl
- Directional boring in Morgan: 7.3 miles southwest
- Directional boring in Blum: 7.8 miles northeast
- Directional boring in Meridian: 13.2 miles southwest
- Directional boring in Whitney: 13.3 miles southeast
- Directional boring in Rio Vista: 13.5 miles northeast
- Directional boring in Cleburne: 20.4 miles north
What boring work may come up near Plowman Creek Park Road in Kopperl?
- Highway crossing: A bore beneath FM 1859 needs a route that fits the TxDOT right of way and the utility permit issued to the line owner.
- Street service: A water or sewer line along Farm Road 56 can pass below pavement, with the bore planned around buried utilities.
- Creek crossing: A Plowman Creek route needs a planned depth and a check for federal waterway jurisdiction before work is set.
- Rail crossing: A route near the BNSF Railway boundary needs the railroad’s crossing agreement before a bore can proceed.
- Fiber conduit: A conduit route along Plowman Creek Park Road needs marked utilities exposed before the drill approaches them.
- Residential service: A line near 8th Avenue can connect a property without opening the full street surface, subject to the route and road authority.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Kopperl quote near BNSF Railway?
For a bore near BNSF Railway or Farm Road 56, send the address or map pin first. Tell us what is going in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans showing the route and nearby crossings help us scope the work.
The price follows the work at the Kopperl site. Ground conditions such as Bastrop soil and the sandy clay loam mapped below it affect drilling and reaming. Crossings of FM 1859, BNSF Railway or Plowman Creek can add planning and coordination. Pavement, exposed utilities, pits, excavator time and sand backfill also shape the scope. The 267 road miles from Yukon matter for mobilization, as can a high profile or emergency schedule.
Questions people ask about boring in Kopperl
Does Trinity take directional boring jobs in Kopperl and Bosque County?
Yes. We take directional boring work in Kopperl and Bosque County, with the job staffed by our crews or a vetted partner contractor from a satellite yard. You work with Trinity from the first call through the bore log. Share the route near FM 1859 or another local feature so we can assess the scope.
Who approves a bore under FM 1859 in Kopperl?
TxDOT reviews a utility permit for work in the FM 1859 right of way through its Waco District. The utility owner files the application in TxDOT’s RULIS system, not the drilling contractor. We prepare the bore plan and profile and work under the permit issued to the line owner.
What does a Kopperl bore under BNSF Railway require?
A crossing beneath BNSF Railway needs an agreement from the railroad before the work is planned. The railroad sets crossing conditions such as casing, depth and flagging. Because the track runs along or touches the Kopperl boundary, check whether the proposed route actually crosses railroad property.
Can a line be bored under Plowman Creek in Kopperl?
A bore can be planned under Plowman Creek, which runs 1.03 channel miles through Kopperl. The route and depth need to account for the creek channel and marked utilities. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction.
Who owns the electric lines in Bosque County near Kopperl?
Several utilities report electric service in Bosque County: Oncor Electric Delivery Company, Texas-New Mexico Power, Heart of Texas Electric Cooperative and United Electric Cooperative Service. That county information does not identify the provider at a particular Kopperl address. Confirm the line owner there before setting conduit specifications or planning the bore.
Does Kopperl or Bosque County control 8th Avenue, and must it be cut?
Kopperl has no city government because it is an unincorporated community, so its street approvals belong to the county or state according to the road. A bore under 8th Avenue can avoid cutting the street surface. Confirm the responsible road authority and buried utilities for the specific route first.
How far is Kopperl from Yukon, and does Cleburne affect the job?
Kopperl is 267 road miles and a 5.4 hour drive from our Yukon, Oklahoma main office. Cleburne is 20.4 miles north of Kopperl, but the Yukon distance is what can affect crew mobilization. The route, access and work scope near FM 1859 also shape the plan.
How early should I request Texas811 marks for Farm Road 56 in Kopperl?
For a bore along Farm Road 56, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. If marks wear off or move, have them refreshed before work continues.
What affects the cost of directional boring near FM 1859 in Kopperl?
The price depends on the job, not a set rate. Bastrop soil and sandy clay loam affect drilling conditions; the route may also involve FM 1859, pavement or marked utilities. Pipe size, bore length, crossings, pits, excavator time, backfill, emergency timing and mobilization from Yukon can all change the scope.
Where the Kopperl facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kopperl
- U.S. Census Bureau, TIGER/Line 2024: Kopperl boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Kopperl population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kopperl housing units and year built
- Macrostrat geologic map compilation: map units under Kopperl
- U.S. Department of Transportation, North American Rail Network: track owners in Bosque County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bosque County
- U.S. Geological Survey, Elevation Point Query Service: Kopperl elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kopperl
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kopperl
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kopperl, Texas
Type the address of your job in Kopperl. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kopperl
Same county: Clifton · Laguna Park · Valley Mills · Walnut Springs · Iredell · Cranfills Gap · Mosheim. All counties: Texas county list.
