trinityboringsolutions.com

Hilltop Lakes Texas Directional Boring: Padina Soil, Sycamore Branch and FM 3

Quick Answer: FM 3 and Sycamore Branch are the main mapped crossings to plan around, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Hilltop Lakes, Texas. From our Yukon, Oklahoma main office, Hilltop Lakes is 361 road miles away, so access along Hilltop Boulevard matters to mobilization. Padina loamy fine sand is common here; loose sand can cave behind the bit, so we use drilling fluid and ream in stages. For a route by FM 3, we expose marked lines before steering under pavement.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hilltop Lakes bores at a glance

  • Unincorporated community in Leon County, Texas. Population 1,385 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 361 miles, about 7.3 hours of driving.
  • Ground: Padina soil is mapped on 59 percent of the area, with loamy fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 3. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Sycamore Branch.
  • Public water: Hilltop Lakes Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Hilltop Lakes bores near Sycamore Branch?

FM 3 and Sycamore Branch are local route features we consider when planning a bore in Hilltop Lakes, an unincorporated community in Leon County. The Census Bureau counted 1,385 people here in the 2020 Census; it does not publish annual estimates for this place. We install water, sewer, gas, electric conduit and fiber on routes such as Hilltop Boulevard or near Sycamore Branch, planning around marked lines and access.

Our main office is in Yukon, Oklahoma, and Hilltop Lakes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs under the Arkansas River in Tulsa and measures roughly 4,100 feet with 48 inch pipe. Against that reach, a typical Hilltop Lakes service route is smaller; our family business began in 1965 and has done directional boring since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Padina soil mean for Hilltop Lakes bores?

The USDA soil survey maps Padina soil across 59 percent of Hilltop Lakes, with Padina loamy fine sand on mapped slopes making up the largest individual soil units. At about 40 inches below the surface, loamy fine sand covers 59 percent of the mapped area and fine sand another 24 percent. The survey also maps 89 percent as sandy at that depth, with average clay content of 7 percent. These are mapped patterns, not test borings. On routes near Padina soils, sand cuts readily but can cave behind the drill head, so the hole needs support as we ream.

USDA soil survey, inside the Hilltop Lakes mapped community boundaryWhat is mapped
Soil series mappedPadina 59 percent, Arenosa 24 percent, Melhomes 6 percent and Hearne 4 percent
Texture at the surfaceloamy fine sand 68 percent, fine sand 24 percent and fine sandy loam 4 percent
Texture about 40 inches downloamy fine sand 59 percent, fine sand 24 percent and loamy sand 6 percent
Engineering class about 40 inches downsilty sand (SM) 59 percent, sand with silt (SP SM) 30 percent and lean clay (CL) 6 percent
Average clay content about 40 inches down7 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches8 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel6 percent of the area

Bedrock is not mapped within the top five feet of Hilltop Lakes, which does not rule out rock at greater depth. The USDA survey maps a seasonal water table within 60 inches in 8 percent of the area, so pits near those soils may need pumping. Flood prone soils cover 6 percent, a reason to plan carefully near Sycamore Branch. High steel corrosion risk is mapped in 6 percent; the line owner should consider materials for steel casing and tracer wire. The mapped Sparta Sand is Eocene age, a sand unit that fits the area’s sandy drilling conditions.

What does it take to bore Hilltop Lakes loamy fine sand?

The USDA survey maps sandy soils across most of Hilltop Lakes, including Padina loamy fine sand. Sand can fall in behind the bit, so our sequence supports the hole and keeps the pipe ready for the pull.

  1. On a Padina loamy fine sand route, we use drilling fluid to support the hole as sand loosens behind the bit, then ream in stages.
  2. Before a bore near Hilltop Boulevard, we pothole every marked utility on the path; surface paint shows location but not burial depth.
  3. At a Sycamore Branch crossing, we plan depth to stay below the channel and check for federal waterway jurisdiction before setting the route.
  4. Near soils with a seasonal water table, including mapped areas in Hilltop Lakes, we keep pits small and pump out water if needed.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Where might a Hilltop Lakes line go under FM 3?

FM 3 is the state highway mapped inside Hilltop Lakes, with 2.4 roadway miles in the community; no other highway is mapped within 1.5 miles outside it. A bore under existing FM 3 pavement is planned as a bore or tunnel, not an open cut. The named street network gives other routes to assess: Hilltop Boulevard runs 3.58 miles, Hickory Ridge Drive 3.09 miles and Golfview Drive 2.58 miles inside the mapped community. Their pavement and driveways can stay uncut when pits fit on either side of the crossing.

CrossingTypeMapped extentWho has a say
FM 3State highway2.4 roadway miles insideState highway office
Sycamore BranchStream2.5 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Red Bank CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Pigeon Roost CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake TonkawaLake or pond74 acres, insideChecked for Corps of Engineers jurisdiction
Cherokee LakeLake or pond25 acres, insideChecked for Corps of Engineers jurisdiction
Kickapoo LakeLake or pond16 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hilltop Lakes or within one mile outside the community, and none of its street and rail crossings are mapped. Sycamore Branch runs 2.5 channel miles inside the community, with three mapped street crossings of named streams. Sandy Creek and Red Bank Creek are each 0.6 miles from the boundary. Lake Tonkawa, Cherokee Lake, Kickapoo Lake and Swan Lake are also inside the community, so a route near one of these waters needs crossing conditions checked during planning.

Who approves a Hilltop Lakes bore in Leon County?

Hilltop Lakes has no city government, so local streets such as Hilltop Boulevard are not city streets; local road approvals belong at the county level, while state highway right of way is handled by TxDOT. For a bore under FM 3, the utility owner, not the driller, applies through TxDOT’s RULIS system, and the TxDOT Bryan District reviews it. We prepare the bore plan and profile for the owner’s application. TxDOT rules set cover depths, including 60 inches for electric or communication lines and water lines at highway crossings; the permit can set another depth. A Sycamore Branch crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Hilltop Lakes Water Supply Corporation?

Hilltop Lakes Water Supply Corporation runs the public water system, using groundwater wells for 710 service connections and a population served of 1,257. For an electric conduit bore on Golfview Drive, the line owner must be confirmed for that address before conduit specifications are set. Utilities reporting electric service in Leon County are Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative; that list does not establish which provider serves each location.

Line ownerWhat it isSourceSize
Hilltop Lakes Water Supply CorporationPublic water systemGroundwater wells710 connections, 1,257 people served
Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Leon CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Hilltop Lakes at 1995; 53 percent of housing units date from 1960 to 1999 and 47 percent from 2000 or later. Those housing ages do not establish the age of buried lines along Hickory Ridge Drive. A replacement bore may follow an older service route, while newer construction may need a new connection. Before drilling near marked utilities, we hydrovac pothole them because paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Hilltop Lakes, including Marquez?

Hilltop Lakes is an 8.53 square mile unincorporated community in Leon County, at an elevation of 400 feet, and its ZIP code is 77871. Normangee is 5.0 miles southeast; Marquez is 12.6 miles north, and Leona is 14.1 miles northeast. Centerville, the county seat, is 18.4 miles northeast; Bryan is the nearest larger city, 29.7 miles south. The Yukon yard is 361 road miles away, a 7.3 hour drive. That distance affects mobilization for a bore along FM 3 or a residential street.

Places near Hilltop Lakes

What boring work comes up near Hilltop Boulevard in Hilltop Lakes?

  • Highway crossing: A route beneath FM 3 needs a bore plan that clears the travel lanes and keeps existing pavement intact.
  • Water service: A connection near Hilltop Lakes Water Supply Corporation can use a bore to reach a property without opening the full street route.
  • Fiber drop: Along Hilltop Boulevard, a conduit bore can pass below pavement and driveways while keeping the drill path clear of marked lines.
  • Creek crossing: At Sycamore Branch, the plan accounts for the channel and checks whether the crossing falls under federal waterway jurisdiction.
  • Lake route: A line near Lake Tonkawa needs entry and exit pits placed to suit access around the mapped water feature.
  • Residential replacement: A bore along Hickory Ridge Drive can replace a service without cutting across the whole driveway or street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Alamo Road in Hilltop Lakes?

For a bore near Alamo Road, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us assess the route. If the proposed line crosses a driveway or approaches Sycamore Branch, include that detail so we can consider access and the crossing in the same review.

Mobilization starts with the 361 road miles from Yukon, then the route and ground near Alamo Road shape the work. Padina loamy fine sand can need staged reaming to hold the bore open. The number of marked utilities to expose, FM 3 or creek crossings, and any pavement also affect the plan. Length, pipe size, pits, excavator time and sand backfill add scope; a high profile or emergency job can require more planning.

Questions people ask about boring in Hilltop Lakes

Does Trinity Boring Solutions take directional boring work in Leon County near Hilltop Lakes?

Yes. We take directional boring work in Hilltop Lakes and across Texas. Our crews are company crews or crews from satellite yards operated by partner drilling contractors Trinity has vetted. For a route near Sycamore Branch, we stay involved from the first call through the bore log, whichever crew is on site.

Who runs the Hilltop Lakes water system and where does its water come from?

Hilltop Lakes Water Supply Corporation operates the public water system, and its source is groundwater wells. Public records list 710 service connections and 1,257 people served. For a proposed connection near Hilltop Boulevard, confirm the service location and route with the water system before planning the bore.

Which electric companies report service in Leon County near Hilltop Lakes, and who confirms conduit specs?

Entergy Texas, Oncor Electric Delivery Company, Houston County Electric Cooperative and Navasota Valley Electric Cooperative report electric service in Leon County. The report does not identify the provider for every Hilltop Lakes address. Confirm the line owner for the specific route near FM 3 before setting electric conduit specifications.

Who is responsible for Golfview Drive in Hilltop Lakes, and must a bore cut the street?

Hilltop Lakes is unincorporated and has no city government, so Golfview Drive is not managed as a city street. Local street approvals belong at the county level. A directional bore can pass under the street without cutting its surface when the route and entry and exit pits are planned for the site.

How old are buried lines near Hickory Ridge Drive in Hilltop Lakes?

Housing age does not reveal the age of buried lines along Hickory Ridge Drive. The American Community Survey 2019 to 2023 estimates put the median housing year at 1995, with 53 percent of units built from 1960 to 1999 and 47 percent in 2000 or later. We expose marked utilities before drilling near a replacement route.

What ground does a bore go through in Hilltop Lakes near Padina soil?

The USDA soil survey maps Padina across 59 percent of Hilltop Lakes. At about 40 inches down, loamy fine sand is mapped across 59 percent and fine sand across 24 percent of the area. Sand can fall in behind the drill head, so staged reaming and drilling fluid help support a route near Padina soil.

What bore sizes and lengths can Trinity handle near Alamo Road in Hilltop Lakes?

For a job near Alamo Road, we handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length depend on the line and route. A sketch showing the proposed path and any driveway or utility crossings helps us review the scope.

How much 811 notice is needed for a Hilltop Lakes bore near Hilltop Boulevard?

Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Paint near Hilltop Boulevard shows a line’s position, not its depth. If marks wear off or move, have them refreshed through Texas811 before work continues.

What affects the cost of a directional bore near FM 3 in Hilltop Lakes?

The route and job scope determine the price, including length, pipe size, soil, utility crossings, pavement, creek crossings, pits and excavator time. The 361 road miles from Yukon affect mobilization to FM 3. Padina loamy fine sand, marked lines to expose and any Sycamore Branch crossing can also change the work required.

Where the Hilltop Lakes facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hilltop Lakes

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hilltop Lakes, Texas

Type the address of your job in Hilltop Lakes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hilltop Lakes

Same county: Buffalo · Centerville · Jewett · Oakwood. All counties: Texas county list.