trinityboringsolutions.com

Blessing Texas Directional Boring: Tidehaven Soil, FM 616 and Cashs Creek

Quick Answer: Blessing is an unincorporated community in Matagorda County, so state and county roads are not city owned; Trinity handles directional boring, also called horizontal directional drilling (HDD), for crossings such as FM 616. The Yukon main office is 511 road miles away, a factor for work near Union Pacific’s 2.52 track miles. Tidehaven fine sandy loam is mapped over 38 percent of the area, while clay dominates below about 40 inches and can cling to tooling. For a bore beside Avenue C, we plan around the route, marked lines and ground conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Blessing bores at a glance

  • Unincorporated community in Matagorda County, Texas. Population 856 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 511 miles, about 10.4 hours of driving.
  • Ground: Tidehaven soil is mapped on 38 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 616, Texas State Highway 35 and Texas State Highway 71. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Cashs Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring along Avenue C in Blessing?

Blessing is an unincorporated community in Matagorda County, so its streets fall under county or state authority rather than a city government; we take directional boring work along Avenue C and FM 616. The Census Bureau counted 856 residents in 2020, the latest population count provided for this unincorporated place. Water, sewer, gas, electric conduit and fiber can be routed beneath local streets or between properties.

Our main office is in Yukon, Oklahoma, and Blessing work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. That reach is far beyond a typical Blessing crossing, such as a service route beneath 10th Street. Our family business began in 1965, and we have done directional boring since 1982, including planning work near FM 616 in Blessing.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Tidehaven soil affect drilling in Blessing?

Tidehaven fine sandy loam is the largest mapped soil unit in Blessing, covering 38 percent of the area, and its texture is only part of the drilling picture. The USDA soil survey maps clay at about 40 inches below the surface across 92 percent of the community; the average clay content there is 45 percent, and 99 percent is mapped as CH. Surface textures include fine sandy loam across 45 percent and clay across 21 percent. These are mapped patterns, not test borings, so a route still needs site specific planning.

USDA soil survey, inside the Blessing mapped community boundaryWhat is mapped
Soil series mappedTidehaven 38 percent, Dacosta 24 percent, Laewest 14 percent, Edna 9 percent and Livco 7 percent
Texture at the surfacefine sandy loam 45 percent, sandy clay loam 24 percent and clay 21 percent
Texture about 40 inches downclay 92 percent and clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches17 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel62 percent of the area

The USDA mapping shows no bedrock within the upper five feet, but that does not rule out rock deeper down. A seasonal water table is mapped within 40 inches across 17 percent of the area, so pits there may need pumping. In Blessing, flood prone soils are not mapped, so we still assess site conditions before setting a boring depth or schedule. High steel corrosion risk covers 62 percent, a concern for steel casing and tracer wire that the line owner can address through material choices. Delta Sand and Silt, of Late Pleistocene age, includes sand, silt, clay and gravel; the sticky clay can build on a reamer and grip pipe.

How is a bore run through Blessing clay?

For Blessing routes with clay mapped below the surface, we plan the fluid and reaming sequence to manage sticky cuttings and keep pressure controlled near pavement on FM 616.

  1. Clay at about 40 inches is mapped across much of Blessing, so we use thinner drilling fluid with polymer and ream in stages to manage sticky cuttings.
  2. The survey maps 99 percent CH at that depth; we watch returns near Avenue C pavement and keep fluid pressure controlled to limit ground lift.
  3. Tidehaven fine sandy loam covers 38 percent of the area, so the actual route and soil conditions guide how we support the bore during reaming.
  4. A seasonal water table is mapped within 40 inches across 17 percent of Blessing; where pits meet water, we plan smaller pits and pumping.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a line go under FM 616 in Blessing?

Blessing has FM 616, Texas State Highway 35 and Texas State Highway 71 inside its mapped community boundary, so a route may need a state highway crossing as well as a local street bore. FM 616 has 3.4 mapped roadway miles in the community, while Highway 35 has 2.5. Avenue C is the longest named street at 1.04 miles, followed by 10th Street at 0.97 and Farm Market 616 at 0.92. These alignments matter when choosing entry and exit pits and planning around pavement.

CrossingTypeMapped extentWho has a say
FM 616State highway3.4 roadway miles insideState highway office
Texas State Highway 35State highway2.5 roadway miles insideState highway office
Texas State Highway 71State highway0.2 roadway miles insideState highway office
Union PacificRailroad2.52 track miles insideThe railroad
Cashs CreekStream0.88 channel miles insideChecked for Corps of Engineers jurisdiction
Turtle CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Tres Palacios RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.52 track miles inside Blessing, and five mapped street and rail crossings make railroad coordination relevant to route planning. A crossing needs the railroad’s agreement, which sets conditions such as casing, depth and flagging. Cashs Creek runs 0.88 channel miles inside the community, and four mapped street crossings cross named streams. Creek work needs a check for U.S. Army Corps of Engineers jurisdiction during planning. For route planning in Blessing, we account for the map showing no lakes or ponds within one mile.

Who approves a bore in Matagorda County near Blessing?

FM 616 and Texas State Highway 35 are state highways in Blessing, and TxDOT’s Yoakum District reviews utility work in their right of way. The utility owner files the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT requires a bore or tunnel beneath existing highway pavement, with crossings encased and rural highway bores extending under all travel lanes. County or state authorities handle public streets because Blessing has no city government. A Union Pacific track crossing needs railroad agreement, and a Cashs Creek route is checked for federal waterway jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Matagorda County near Blessing?

The water provider for a specific address near Cashs Creek must be confirmed with the county or local water district before a bore is planned. Electric service reported in Matagorda County includes AEP Texas Central, CenterPoint Energy, Texas New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative. Those county reports do not identify the provider for every address, so the line owner must be confirmed before we plan an electric conduit bore near Avenue C.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Matagorda CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Blessing’s median housing year at 1980; 41 percent of homes were built before 1960, 53 percent from 1960 to 1999, and 6 percent in 2000 or later. That mix can mean a replacement route beneath 10th Street has older lines to locate, while newer service work may need a different connection point. Before drilling near any marked line, we expose it with hydrovac potholing; for a proposed line beneath 10th Street, each marked utility on the path gets that check before the drill approaches.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Blessing in relation to Midfield and Bay City?

Blessing is in Matagorda County, 4.5 miles south of Midfield and 17.3 miles southwest of Bay City, the county seat and nearest larger city. The mapped community covers 2.03 square miles at an elevation of 38 feet. Blessing’s ZIP codes are 77419 and 77414, which help us identify the service area when coordinating underground boring plans. Markham is 11.0 miles northeast, Palacios is 11.2 miles south, and La Ward is 15.1 miles west. From our Yukon yard, Blessing is 511 road miles away, a drive of 10.4 hours, so distance affects mobilization for work near FM 616.

Places near Blessing

Which jobs call for a bore near 10th Street in Blessing?

  • Highway crossing: A route under FM 616 needs a bore plan that accounts for pavement and the state highway right of way.
  • Street service: A water or sewer line beneath Avenue C can pass under the road without an open cut across its pavement.
  • Rail crossing: A route below Union Pacific track needs railroad coordination for crossing conditions, including casing, depth and flagging.
  • Creek crossing: A Cashs Creek bore needs a route plan that accounts for the channel and checks federal jurisdiction during planning.
  • Fiber conduit: A conduit route near 10th Street needs marked utilities exposed before drilling close to them.
  • Rural service: A line extending toward Midfield can be scoped from its address, route length and required pipe or conduit size.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Cashs Creek in Blessing?

To scope a route near Cashs Creek, start with the address or map pin, then tell us what will go underground, such as a water line or fiber conduit. Include its pipe or conduit size and the footage. A sketch or plan showing how a route meets Avenue C or a creek crossing helps us assess pits, access and nearby utilities.

In Blessing, soil and drilling conditions matter first because clay mapped below the surface can cling to tooling and grip pipe. The route’s crossings come next: FM 616 pavement, Union Pacific track and Cashs Creek can each add planning or construction steps. Price also reflects line size, footage, marked utilities to expose, concrete or pavement, pits, excavator time and backfill. Mobilization matters too because the Yukon yard is 511 road miles away. Emergency timing or a high profile route can change the work plan.

Questions people ask about boring in Blessing

Does Trinity Boring Solutions take jobs in Blessing and Matagorda County, and who staffs them?

Yes, we take directional boring work in Blessing and across Texas. The work is carried out by our own crews or vetted drilling contractor partners operating from satellite yards, while you work with Trinity through the bore log. For a route near FM 616, we need the location, line type, size and footage to understand the scope.

What does a bore under Union Pacific in Blessing need?

A bore beneath Union Pacific track needs the railroad’s crossing agreement. The railroad sets crossing conditions such as casing, depth and flagging, and TxDOT asks for a copy if the line also occupies highway right of way. Union Pacific has 2.52 track miles inside Blessing, so identify the track crossing in the proposed route.

Can a line be bored under Cashs Creek in Blessing?

A bore can be planned to pass beneath Cashs Creek, subject to route conditions and the required jurisdiction check. The creek runs 0.88 channel miles inside Blessing, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. A map pin and proposed crossing location help establish the route.

Who owns electric lines in Matagorda County near Blessing, and who confirms conduit specs?

AEP Texas Central, CenterPoint Energy, Texas New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service in Matagorda County. Those reports do not assign a provider to each address. Before a conduit bore near Avenue C, confirm the specific line owner and conduit requirements with that owner.

Does Blessing or the county control Farm Market 616, and must it be cut?

Blessing has no city government, so public streets fall under county or state authority; Farm Market 616 is a state highway. A bore beneath existing highway pavement avoids cutting across it, since TxDOT requires boring or tunneling there. The utility owner handles the TxDOT permit application for work in the right of way.

Do older buried lines near 10th Street in Blessing affect replacement bores?

They can affect planning: American Community Survey estimates put the median housing year at 1980, with 41 percent of homes built before 1960. Older properties may have existing lines that need locating before a replacement route is set. Near 10th Street, we expose each marked utility on the bore path before drilling close to it.

Does Trinity cover Midfield and rural sites outside Blessing?

Yes, we take work in Texas beyond Blessing, including Midfield and rural locations. Midfield is 4.5 miles north of Blessing, but each address still needs its own route, access and utility review. A map pin, proposed line type, size and footage help us assess work outside the mapped community boundary.

How much notice does Texas811 need before boring near Avenue C in Blessing?

Paint shows a line’s position, not its depth. For a bore near Avenue C, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves beyond that window, file a new notice; worn or moved marks need refreshing through Texas811 before work continues.

What site details affect our directional boring cost near FM 616 in Blessing?

The ground and route drive the scope: clay mapped below the surface can affect drilling and reaming, while an FM 616 pavement crossing adds highway planning. Price also reflects bore length, pipe or conduit size, utilities to expose, pavement, pits, backfill and any creek or track crossing. Mobilization from the Yukon yard is another project factor.

Where the Blessing facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Blessing

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Blessing, Texas

Type the address of your job in Blessing. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Blessing

Same county: Van Vleck · Matagorda · Sargent · Wadsworth. All counties: Texas county list.