trinityboringsolutions.com

Hubbard Texas Directional Boring: Crockett Soil, Pin Oak Creek and Texas State Highway 31

Quick Answer: Crockett soil can grip a reamer, so we use directional boring, also called horizontal directional drilling (HDD), to put lines beneath Texas State Highway 31 without cutting pavement. Hubbard is 288 road miles from our Yukon, Oklahoma main office, and Pin Oak Creek adds a separate crossing question. The USDA soil survey maps clay across 99 percent of the area at about 40 inches. Sticky cuttings can build on the reamer, so the ground affects how we plan each pass.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hubbard bores at a glance

  • Incorporated city in Hill County, Texas. Population 1,480 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 288 miles, about 5.6 hours of driving.
  • Ground: Crockett soil is mapped on 58 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 89 percent of the area.
  • Highways inside the boundary: Texas State Highway 31, Texas State Highway 171 and FM 2114. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pin Oak Creek and Hackberry Creek.
  • Public water: City of Hubbard, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Pin Oak Creek in Hubbard?

Crockett fine sandy loam is common around Hubbard and can make cuttings cling to the reamer. We take directional boring work in this Hill County city, whose population is 1,480 in the Census Bureau Vintage 2024 estimate. Our crews can place water, sewer, gas, electric conduit or fiber beneath Texas State Highway 31, 4th Street or other Hubbard routes.

Our main office is in Yukon, Oklahoma, and Hubbard work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With no utility strike in over 25 years, our family business brings its directional boring experience, which dates to 1982, to routes near the City of Hubbard groundwater system and the electric providers reported in Hill County. The business began in 1965.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Crockett soil like to bore in Hubbard?

The USDA soil survey maps Crockett soil across 58 percent of Hubbard, with Crockett fine sandy loam map units covering 46 percent at 1 to 3 percent slopes and 12 percent at 0 to 1 percent slopes. Surface texture is mapped as fine sandy loam across 60 percent of the area and clay across 24 percent. At about 40 inches below the surface, clay is mapped under 99 percent of the area, with average clay content of 47 percent. We treat mapped Crockett, Ferris, Normangee, and Wilson soil patterns as planning references, not test borings along Hubbard crossings. The deep clay can hold an open hole but stick to the reamer.

USDA soil survey, inside the Hubbard city limitsWhat is mapped
Soil series mappedCrockett 58 percent, Ferris 20 percent, Normangee 10 percent and Wilson 5 percent
Texture at the surfacefine sandy loam 60 percent, clay 24 percent and clay loam 16 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 98 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches89 percent of the area (0 percent hard rock, 89 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey maps bedrock within 60 inches across 89 percent of Hubbard, typically at 51 inches, though only 6 percent is mapped within 40 inches. Weathered rock may slow a bore where the drill moves from soil into rock. No seasonal water table is mapped within 60 inches, and flood prone soils cover 1 percent. High steel corrosion risk is mapped across 99 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that soil corrosion concern. The Cenozoic Quartz Sand Decomposition Residuum includes clayey or silty sand, while the Phanerozoic Wolfe City Formation includes sandstone, mudstone and claystone.

What does it take to bore clay in Hubbard?

Crockett soil and clay mapped at about 40 inches call for a controlled drilling pace. Near Texas State Highway 31, we manage fluid returns carefully so pressure does not lift pavement.

  1. Crockett soil can ball on the reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
  2. Because clay covers 99 percent of Hubbard at about 40 inches, we watch fluid returns closely near 4th Street pavement.
  3. We expose each marked utility with hydrovac potholing before the drill approaches it, including lines near the City of Hubbard water system.
  4. A walkover locator follows the drill near Pin Oak Creek, while we record depth and pitch as the bore advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a Hubbard line go under 4th Street?

Texas State Highway 31 has 3.4 mapped roadway miles inside Hubbard, while Texas State Highway 171 has 1.7 and FM 2114 has 0.7. A utility route beneath an existing highway is bored or tunneled rather than open cut. Among named streets, 4th Street runs 4.02 miles in the city, 2nd Street 2.67 miles and 3rd Street 1.92 miles. Those long routes can put a bore near pavement, driveways and buried services, so the planned path and crossings matter.

CrossingTypeMapped extentWho has a say
Texas State Highway 31State highway3.4 roadway miles insideState highway office
Texas State Highway 171State highway1.7 roadway miles insideState highway office
FM 2114State highway0.7 roadway miles insideState highway office
Pin Oak CreekStream0.26 channel miles insideChecked for Corps of Engineers jurisdiction
Hackberry CreekStream0.07 channel miles insideChecked for Corps of Engineers jurisdiction
North Fork Pin Oak CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Treadwell BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Post Oak CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Hubbard LakesLake or pond21 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hubbard or within 1 mile outside the limits, so no local track crossing is identified in these records. Pin Oak Creek runs 0.26 channel miles in the city, and Hackberry Creek runs 0.07. One mapped street crossing of a named stream is recorded. A proposed bore beneath Pin Oak Creek needs creek depth and access planning; Hubbard Lakes, a 21 acre water body, is outside the city limits.

Who approves a Hubbard bore in Hill County?

Hubbard is an incorporated city, so 4th Street and other city streets are under city control; Texas State Highway 31, Texas State Highway 171 and FM 2114 are state routes. TxDOT’s Waco District reviews a utility permit for work in state highway right of way. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system, and we prepare the bore plan and profile for that application. Highway cover is set by line type: electric and communication lines need 60 inches at crossings, water needs 60 inches, and pressurized sewer needs 60 inches. Pin Oak Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning. No railroad crossing is mapped in Hubbard.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near the City of Hubbard water system?

The City of Hubbard public water system draws from groundwater wells and reports 639 service connections serving 1,917 people. Before a bore near that water network, we expose each marked utility on the path with hydrovac potholing; paint shows position, not depth. Hill County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. The line owner for an address must be confirmed before planning conduit.

Line ownerWhat it isSourceSize
City of HubbardPublic water systemGroundwater wells639 connections, 1,917 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in Hill CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Hubbard’s median housing year at 1960, so we verify utilities before boring near 2nd Street. The survey estimates 51 percent of housing was built before 1960, 42 percent from 1960 to 1999 and 7 percent in 2000 or later. That mix can mean a route near 3rd Street involves older services as well as newer connections. We pothole marked lines before drilling near them, whether a project replaces a service or adds one.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Hubbard and Dawson?

Hubbard is in Hill County at an elevation of 635 feet and covers 1.96 square miles. Its ZIP code is 76648. Dawson is 6.0 miles northeast, Malone is 7.4 miles northwest, Penelope is 7.5 miles west, Mount Calm is 7.9 miles southwest and Coolidge is 10.9 miles southeast. Hillsboro, the county seat and nearest larger city, is 21.6 miles northwest. From our Yukon yard, Hubbard is 288 road miles away and a 5.6 hour drive, a distance that factors into mobilization for work near Texas State Highway 31.

Places near Hubbard

What could we bore near 2nd Street in Hubbard?

  • Highway crossing: A water or communication line under Texas State Highway 31 needs a planned bore profile and cover depth for the crossing.
  • Water service: A service near 2nd Street can connect to the City of Hubbard groundwater system after marked utilities are exposed.
  • Fiber route: A fiber conduit beneath 4th Street can avoid an open cut across its long paved route.
  • Creek crossing: A route under Pin Oak Creek needs channel depth planning and a check for federal waterway jurisdiction.
  • Electric conduit: Near Magnolia Avenue, we first confirm the line owner among the electric providers reported in Hill County.
  • Drainage bore: A route near Hackberry Creek or Hubbard’s mapped drainage needs a path that keeps the channel and surface intact.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Magnolia Avenue in Hubbard?

For a quote near Magnolia Avenue, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us trace the route. Include nearby crossings such as 4th Street or Pin Oak Creek, since those details show where the bore must pass and where access may be needed.

The 288 road miles from Yukon affect mobilization for a Hubbard job. Crockett soil and deep clay can change drilling pace, while a route under Texas State Highway 31 brings right of way planning and required cover into the scope. We also consider footage, pipe size, utilities crossed and exposed, pavement, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can add demands.

Questions people ask about boring in Hubbard

Does Trinity Boring Solutions take directional boring work in Hubbard and Hill County?

Yes. We take directional boring work in Hubbard, Hill County, with our own crews and partner contractor crews from vetted satellite yards. We carry communication from first call through bore log for a planned crossing near 4th Street, regardless of the field crew assigned. We can plan routes beneath local streets such as 4th Street.

For our planned bore under Texas State Highway 31 in Hubbard, who approves the crossing permit?

TxDOT reviews the utility permit through its Waco District for work in the Texas State Highway 31 right of way. The utility owner files in TxDOT’s RULIS system, and we prepare the bore plan and profile. Highway cover depends on the line type, with the permit setting the approved project details.

Can you bore a line under Pin Oak Creek in Hubbard?

A bore under Pin Oak Creek can be planned, subject to the route, ground and access. The creek has 0.26 channel miles inside Hubbard, so the crossing plan needs to account for the channel. During planning, we check whether a Pin Oak Creek crossing falls under US Army Corps of Engineers jurisdiction.

For our bore planning near Pin Oak Creek in Hubbard, who runs the public water system and where does its water come from?

The City of Hubbard owns and runs the public water system, which uses groundwater wells. The report lists 639 service connections serving 1,917 people, figures we account for when planning underground utility work in Hubbard. For a bore near those lines, we hydrovac pothole marked utilities before drilling close to them.

Which electric company serves my Hubbard address in Hill County?

Hill County records report Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Navarro County Electric Cooperative and Navasota Valley Electric Cooperative. They do not identify the provider at every Hubbard address. Confirm the line owner before planning a conduit bore near 3rd Street or elsewhere.

Does the city or county control Hubbard streets like 3rd Street, and must they be cut?

Hubbard is incorporated, so its city streets, including 3rd Street, belong to the city itself. Directional boring can place a line beneath a street without cutting its surface. We still plan the bore around pavement, marked utilities and the access needed for the entry and exit pits.

How much notice does Texas811 need for a Hubbard bore near 4th Street?

For a bore near 4th Street, Texas law requires a locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead. If a start on Texas State Highway 31 slips more than 14 days past the original notice, we submit a new request. Before work resumes near Magnolia Avenue, we have worn or moved marks refreshed through Texas811.

How far is Hubbard from Yukon, and does the distance from Hillsboro change the job?

Hubbard is 288 road miles and a 5.6 hour drive from our Yukon, Oklahoma main office, so we plan travel into scheduling. Hillsboro is 21.6 miles northwest of Hubbard. The Yukon distance affects mobilization, while the planned route, such as a crossing near Texas State Highway 31, determines the field work.

What affects the cost of a Hubbard directional bore near Texas State Highway 31?

The job scope drives the price, not one fixed rate. We consider bore length, pipe or conduit size, Crockett soil and rock, utilities crossed and exposed, pavement, creek or drainage crossings, pits, excavator time and backfill. A Texas State Highway 31 crossing and the 288 road miles from Yukon can also affect planning and mobilization.

Where the Hubbard facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hubbard

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hubbard, Texas

Type the address of your job in Hubbard. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hubbard

Same county: Whitney · Itasca · Blum · Abbott · Covington · Carl's Corner · Bynum · Mertens · Aquilla. All counties: Texas county list.