Kennard Texas Directional Boring: Kurth Soil, Elm Creek and Texas State Highway 7
Quick Answer: The top five feet in Kennard map mostly Kurth fine sandy loam at the surface, with sandy clay loam common about 40 inches down. At Elm Creek, Trinity Boring Solutions can use directional boring, also called horizontal directional drilling (HDD), to place a line beneath the channel. Kennard is 378 road miles from our Yukon, Oklahoma main office, and Texas State Highway 7 adds permit planning. Kurth soil can hold a bore, while the mapped seasonal water table calls for care around pits.
Kennard bores at a glance
- Incorporated city in Houston County, Texas. Population 285 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 378 miles, about 7.8 hours of driving.
- Ground: Kurth soil is mapped on 64 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 15 percent of the area.
- Highways inside the boundary: Texas State Highway 7, FM 357 and FM 2781. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Elm Creek.
- Public water: City of Kennard, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Elm Creek in Kennard?
The top five feet around Elm Creek map mainly to Kurth fine sandy loam at the surface, with sandy clay loam common about 40 inches down. Kennard is in Houston County, where the Census Bureau Vintage 2024 estimate puts the population at 285. We install water, sewer, gas, electric conduit and fiber along routes such as FS Road 525 and Texas State Highway 7.
Our main office is in Yukon, Oklahoma, and Kennard work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet under the Arkansas River in Tulsa; a Kennard job beside Elm Creek or Texas State Highway 7 is typically much shorter. We have done directional boring since 1982.

What is Kurth soil like to bore in Kennard?
The USDA soil survey maps Kurth soil across 64 percent of Kennard. Kurth fine sandy loam on 1 to 3 percent slopes covers 51 percent of the mapped area, with another 13 percent mapped on 5 to 8 percent slopes. Fine sandy loam is the surface texture across 81 percent. About 40 inches down, sandy clay loam is mapped under 75 percent of the area, and average clay content there is 26 percent. That mix can hold a bore, but clay may stick to the reamer and grip the pipe.
| USDA soil survey, inside the Kennard city limits | What is mapped |
|---|---|
| Soil series mapped | Kurth 64 percent, Fuller 13 percent, Penning 11 percent, Koury 4 percent and Keltys 4 percent |
| Texture at the surface | fine sandy loam 81 percent, very fine sandy loam 11 percent and silt loam 4 percent |
| Texture about 40 inches down | sandy clay loam 75 percent, loam 17 percent and silt loam 4 percent |
| Engineering class about 40 inches down | clayey sand (SC) 64 percent, lean clay (CL) 28 percent and silty clay (CL ML) 4 percent |
| Average clay content about 40 inches down | 26 percent |
| Bedrock mapped within 60 inches | 15 percent of the area (0 percent hard rock, 15 percent weathered rock) |
| Seasonal water table within 60 inches | 95 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
Weathered bedrock is mapped within 60 inches across 15 percent of Kennard, with typical bedrock depth at 53 inches; hard bedrock is not mapped within that depth. The seasonal water table is mapped within 40 inches across 95 percent, so pits may need pumping. Flood prone soils cover 4 percent. High steel corrosion risk is mapped across 95 percent, which matters for casing and tracer wire choices. The Yegua Formation, of Bartonian age, includes claystone and sandstone, so the bore plan should allow for changing ground.
How do we drill Kennard’s sandy clay loam with local soil series including Kurth and Koury?
Kennard’s sandy clay loam is common about 40 inches below the surface, while the seasonal water table is mapped shallow across much of the city. We plan the bore and pits around those conditions.
- Kurth soil is mapped across 64 percent of Kennard; we adjust fluid and reaming to manage clay that can cling to the reamer and pipe.
- With a seasonal water table mapped within 40 inches across 95 percent of Kennard, we keep pits small where practical and pump water as needed.
- Before drilling near a marked line on FS Road 525, we expose it with hydrovac; locate paint shows position, not burial depth.
- At Elm Creek, we plan the bore beneath the channel and check during planning whether the crossing is under U.S. Army Corps of Engineers jurisdiction.

What is in the way of a new line in Kennard near FS Road 525?
Texas State Highway 7 has 4.4 mapped roadway miles inside Kennard. FM 357 adds 0.6 miles, and FM 2781 adds 0.4 miles. A route on any of these highways needs its right of way considered separately from a city street. FS Road 525 is the longest named street at 1.63 miles, followed by Pine Tree Road at 1.28 miles and Broadway at 1.16 miles. South Broadway adds 1.01 miles. A bore can pass beneath pavement without cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 7 | State highway | 4.4 roadway miles inside | State highway office |
| FM 357 | State highway | 0.6 roadway miles inside | State highway office |
| FM 2781 | State highway | 0.4 roadway miles inside | State highway office |
| Elm Creek | Stream | 0.27 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wood Spring Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| South Fork | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Smitherman Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Brice Spring Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad runs inside Kennard or within one mile outside its limits, so there is no mapped track crossing to plan around. Elm Creek has 0.27 channel miles inside the city, but no street crossing of a named stream is mapped. Wood Spring Branch and South Fork touch or run along the boundary. We have no lakes or ponds mapped within one mile of Kennard, so we focus water planning on Elm Creek. If a route crosses Elm Creek, planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Who signs off on a bore under Texas State Highway 7 in Kennard?
Kennard’s city streets, including Broadway and FS Road 525, are city streets; no city department, form or fee is specified here. Work in the right of way of Texas State Highway 7, FM 357 or FM 2781 needs a TxDOT utility permit. The utility owner files through RULIS, and the TxDOT Lufkin District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that utility. For an electric or communication crossing of Texas State Highway 7, plan for at least 60 inches of cover below the lowest crossed grade; the permit may set another depth. A creek route near Elm Creek is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Houston County near Kennard?
The City of Kennard public water system uses groundwater wells and reports 184 service connections serving 460 people. A route near its water lines needs the system and line owner confirmed before drilling. Entergy Texas, Oncor Electric Delivery Company and Houston County Electric Cooperative report electric service in Houston County; that does not identify the provider at every Kennard address. We confirm the line owner before planning an electric conduit bore near Texas State Highway 7.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Kennard | Public water system | Groundwater wells | 184 connections, 460 people served |
| Entergy Texas, Oncor Electric Delivery Company and Houston County Electric Cooperative | Electric utilities reporting service in Houston County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Kennard’s median housing year at 1978; 18 percent of homes were built before 1960, 73 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean replacing older service lines as well as adding new ones. Before a bore under Broadway approaches a marked utility, we hydrovac pothole it; paint shows position, not depth.

How far is Kennard from Crockett and our Yukon office?
Kennard is an incorporated city in Houston County, covers 1.3 square miles and sits at an elevation of 349 feet. Its ZIP code is 75847. Crockett, the county seat and nearest larger city, is 16.2 miles west; Wells is 16.8 miles northeast, and Latexo is 17.3 miles west. From the Yukon, Oklahoma main office, the drive is 378 road miles and 7.8 hours. That distance can affect mobilization for a bore on FS Road 525 or Texas State Highway 7.
Places near Kennard
- Directional boring in Crockett: 16.2 miles west
- Directional boring in Wells: 16.8 miles northeast
- Directional boring in Latexo: 17.3 miles west
- Directional boring in Grapeland: 19.6 miles northwest
- Directional boring in Groveton: 21.1 miles south
Which jobs call for a bore near Broadway in Kennard?
- Highway crossing: A bore beneath Texas State Highway 7 needs a route and cover plan that fits the highway right of way.
- Water service: A connection near the City of Kennard groundwater system needs the water line owner confirmed along its route.
- Fiber conduit: A conduit route along South Broadway can stay below the street surface while marked utilities are exposed first.
- Creek crossing: A line beneath Elm Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Street service: A bore along FS Road 525 can connect a property without cutting across the paved street.
- Electric conduit: Near FM 357, we confirm the electric line owner before planning a conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Kennard bore near South Broadway?
Send the map pin or address first; the exact spot matters if a route is near South Broadway, Elm Creek or Texas State Highway 7. For an FM 357 bore, we ask you to specify what goes underground, the pipe or conduit size, and footage. A sketch or plans help us see crossings, access and pit locations before we scope the bore.
The price follows the route and work involved. Kurth soil and the mapped seasonal water table affect drilling and pit work. Crossings under Texas State Highway 7 or near Elm Creek add planning, while concrete, pavement and exposed utilities affect the work on site. Pipe size, bore length, reaming, backfill and excavator time also matter. Kennard is 378 road miles from Yukon, so mobilization is part of the logistics.
Questions people ask about boring in Kennard
Does Trinity take directional boring work in Kennard and Houston County, and who staffs it?
Yes. We take directional boring work in Kennard, and our crews or vetted partner contractor crews handle the drilling. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log. The Census Bureau estimates Kennard’s population at 285, and routes may involve FS Road 525 or Texas State Highway 7.
Could groundwater or flooding near Elm Creek affect bore pits in Kennard?
It can affect pit setup. The USDA soil survey maps a seasonal water table within 40 inches across 95 percent of Kennard, so pits near Elm Creek may need pumping. Flood prone soils are mapped across 4 percent of the city. We plan the route and pit locations with those mapped conditions in mind.
Does Kurth soil in Kennard create a corrosion concern, and what pipe can be used?
The mapped soil indicates a steel corrosion concern: high steel corrosion risk covers 95 percent of Kennard. On a Texas State Highway 7 crossing, we leave any steel casing coating or tracer wire selection to the line owner. With Kennard’s fine sandy loam, we do not apply that soil corrosion concern to HDPE. Kurth soil makes up 64 percent of the mapped area, so material choices should be considered for the specific route.
What ground does a bore pass through in Kennard’s Kurth soil?
The USDA soil survey maps Kurth fine sandy loam across 51 percent of Kennard on 1 to 3 percent slopes. About 40 inches down, sandy clay loam is mapped under 75 percent of the area, with average clay content of 26 percent. Those are mapped soil patterns, not test borings, so the actual bore route still needs field planning.
Is there rock near the surface on a Kennard bore route?
Weathered bedrock is mapped within five feet across 15 percent of Kennard, with typical bedrock depth at 53 inches. Hard bedrock is not mapped within 60 inches. The mapped Yegua Formation includes claystone and sandstone, but the soil survey does not establish the exact material at an individual bore location.
Who approves a Kennard bore beneath Texas State Highway 7?
The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Lufkin District reviews it. We prepare the bore plan and profile for the owner’s filing. A crossing beneath Texas State Highway 7 needs the cover depth set by the applicable TxDOT rules and permit.
Does Kennard’s distance from Crockett affect a bore mobilization from Yukon?
Crockett is 16.2 miles west of Kennard, while our Yukon, Oklahoma main office is 378 road miles away. That distance can affect crew and equipment mobilization for work near Broadway or Elm Creek. The route length, access and job requirements also shape the plan.
How much notice is needed before boring along FS Road 525 in Kennard?
Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days beyond the original notice, submit a new request. For FS Road 525, worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near Texas State Highway 7 in Kennard?
The route and scope determine the price. Factors include bore length and pipe size, Kurth soil and rock, utilities to expose, pavement, creek crossings, pits, backfill and excavator time. A Texas State Highway 7 crossing adds permit planning, and the 378 road miles from Yukon affect mobilization.
Where the Kennard facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kennard
- U.S. Census Bureau, TIGER/Line 2024: Kennard boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kennard
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kennard housing units and year built
- Macrostrat geologic map compilation: map units under Kennard
- U.S. EPA Safe Drinking Water Information System: public water systems serving Kennard
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Houston County
- U.S. Geological Survey, Elevation Point Query Service: Kennard elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kennard
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kennard
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kennard, Texas
Type the address of your job in Kennard. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kennard
Same county: Lovelady. All counties: Texas county list.
