Wells Texas Directional Boring: Woodtell Soil, US 69 and Red Bayou
Quick Answer: Need a line beneath US 69 without opening the road? We take directional boring, also called horizontal directional drilling (HDD), work in Wells and across Texas for crossings such as US 69. From our Yukon, Oklahoma main office, Wells is 370 road miles away, and a route along Rusk Street still needs its own access and utility checks. Woodtell soil covers much of town, but clay is mapped at about 40 inches, where sticky ground can load the reamer and grip pipe.
Wells bores at a glance
- Incorporated city in Cherokee County, Texas. Population 903 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 370 miles, about 7.4 hours of driving.
- Ground: Woodtell soil is mapped on 66 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 67 percent of the area.
- Highways inside the boundary: US 69 and FM 1247. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Wells, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring on Rusk Street in Wells?
We take directional boring work in Wells, Cherokee County, a town with 903 residents according to the Census Bureau Vintage 2024 estimate. A water, sewer, gas, electric conduit or fiber line can follow Rusk Street or another route through town, with the bore path planned to avoid open cutting where the crossing allows.
Our main office is in Yukon, Oklahoma, and Wells work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our roughly 4,100 foot, 48 inch Arkansas River bore in Tulsa shows our reach; a service run on Rusk Street is a different scale. This family business began in 1965 and has drilled directionally since 1982, experience we bring to Wells lines.

What is Woodtell soil like to bore in Wells?
The USDA soil survey maps Woodtell soil across 66% of Wells and Sacul across 28%, with LaCerda also mapped. Fine sandy loam covers 96% of the surface area, while clay loam covers 4%. At about 40 inches below the surface, clay is mapped across 99% of the area, with an average clay content of 43%. Woodtell, Sacul, and LaCerda map soil patterns in Wells, but we treat them as mapping, not substitutes for site test borings. That shift from a sandy loam surface to clay below can make a bore sticky and put more load on the reamer.
| USDA soil survey, inside the Wells city limits | What is mapped |
|---|---|
| Soil series mapped | Woodtell 66 percent, Sacul 28 percent and LaCerda 3 percent |
| Texture at the surface | fine sandy loam 96 percent and clay loam 4 percent |
| Texture about 40 inches down | clay 99 percent |
| Engineering class about 40 inches down | fat clay (CH) 99 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 67 percent of the area (0 percent hard rock, 67 percent weathered rock) |
| Seasonal water table within 60 inches | 30 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 33 percent of the area |
Weathered bedrock is mapped within 60 inches in 67% of Wells, with a typical depth of 40 inches; hard bedrock is not mapped within that depth range. The USDA soil survey maps a seasonal water table within 60 inches across 30% of the area, so pits may need pumping. For work near Red Bayou in Wells, we recognize flood prone soils are not mapped and do not infer their absence from the maps. High steel corrosion risk is mapped across 33%, which is worth discussing for steel casing and tracer wire; the line owner selects any coating. The Cook Mountain Formation, of Bartonian age, includes clay and marly sand, so ground conditions can vary along a bore.
How do we drill Wells clay along Rusk Street?
Wells has fine sandy loam at the surface and clay mapped below it. We plan the bore around the Woodtell soil pattern, then adjust the drilling approach to the ground we encounter along the route.
- Clay response: With clay mapped under Woodtell soil at about 40 inches, we use a thinner drilling fluid, ream in stages and plan to pull the pipe the day the hole opens.
- Pressure control: Heavy clay covers much of the mapped ground at that depth, so we watch fluid returns to limit pressure that could lift pavement on Rusk Street.
- Utility checks: Before drilling near marked lines on Creek 2734, we hydrovac pothole each marked utility; the paint shows its position, not its depth.
- Tracking: We follow the drill head from the surface and log depth and pitch along the planned route, including any run toward US 69.

What is in the way of a new line in Wells near US 69?
US 69 runs 1.7 mapped roadway miles inside Wells, and FM 1247 runs 0.8 miles. No additional highway is mapped within 1.5 miles outside the town limits. Rusk Street is the longest named street at 1.73 miles, followed by Rusk Avenue at 1.71 miles and Creek 2734 at 1.06 miles. A bore on one of these roads needs a route plan that accounts for pavement, access and marked utilities. The mapped road lengths help identify where a crossing may be needed, but the exact path depends on the address and plans.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 1.7 roadway miles inside | State highway office |
| FM 1247 | State highway | 0.8 roadway miles inside | State highway office |
| Red Bayou | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Devils Bayou | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Wells or within 1 mile outside its limits, so the records identify no local track crossing. No streams are mapped inside town. Red Bayou lies 0.1 miles from the limits and Devils Bayou lies 0.8 miles away; no lakes or ponds are mapped within 1 mile. No street crossings of named streams are mapped inside town. If a proposed route reaches a railroad or a creek, those features need to be considered in the crossing plan.
Whose permission does a Wells bore in Cherokee County need?
US 69 and FM 1247 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Tyler District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with encasement at crossings. Cover depends on the line type, and the district can set a different depth in its permit. Because Wells is incorporated, we treat Rusk Street as a city street for underground boring and coordinate street work accordingly. No railroad is mapped nearby, but a railroad crossing would need an agreement from the railroad that owns the track. Red Bayou or another water crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the Wells water system and what about the City of Wells?
The City of Wells owns the public water system, which uses groundwater wells and serves 853 people through 404 service connections. Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County; that does not identify the provider at every address. Before a conduit bore near the City of Wells water lines or electric facilities, the line owner needs to be confirmed. We hydrovac pothole marked utilities on the path before drilling near them, since surface marks do not show depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Wells | Public water system | Groundwater wells | 404 connections, 853 people served |
| Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative | Electric utilities reporting service in Cherokee County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Wells’ median housing year at 1977. The estimates show 32% of homes built before 1960 and 20% built in 2000 or later. Those ages do not establish when buried lines were installed, but they make the difference between a replacement bore and a new service worth clarifying. On Rusk Avenue, we expose marked lines with hydrovac before the drill approaches a crossing.

How far is Wells from Alto and our Yukon office?
Wells is in Cherokee County at an elevation of 333 feet and covers 1.92 square miles. Its ZIP code is 75976. Alto is 13.2 miles northwest, while Redland is 14.9 miles southeast. Hudson, the nearest larger city, is 15.3 miles southeast; Rusk, the county seat, is 24.2 miles northwest. The Yukon, Oklahoma main office is 370 road miles away, about a 7.4 hour drive. That distance is one part of planning a crew’s mobilization for a Wells project.
Places near Wells
- Directional boring in Alto: 13.2 miles northwest
- Directional boring in Redland: 14.9 miles southeast
- Directional boring in Hudson: 15.3 miles southeast
- Directional boring in Kennard: 16.8 miles southwest
- Directional boring in Lufkin: 17.4 miles southeast
What kinds of bores come up in Wells near Red Bayou?
- Highway crossing: A line beneath US 69 needs a planned bore path that accounts for the highway pavement and the line owner’s permit.
- Water service: A connection near the City of Wells system starts with the route, pipe size and existing water lines identified for potholing.
- Street replacement: A replacement line along Rusk Avenue can pass beneath pavement, with marked utilities exposed before the drill approaches them.
- Creek crossing: If a planned route reaches Red Bayou outside Wells, channel depth and federal jurisdiction are checked during planning.
- Fiber route: A fiber conduit along Forest Road needs a size and footage plan, plus a check of marked utilities along the bore path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Wells bore on Rusk Street?
For a bore tied to Rusk Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route along Rusk Street can involve pavement and existing lines, so show the start and end points and any crossings you already know about. That lets us review the path before discussing the scope.
Ground, crossings and logistics shape the price. Woodtell soil gives way to clay below the surface, and possible weathered bedrock can affect drilling time. Length, pipe or conduit size, soil and rock, utility exposures, pavement, creek crossings, pits, excavator time and sand backfill all matter. A route involving US 69 can add crossing requirements, while mobilization also reflects Wells’ 370 road miles from Yukon. High profile or emergency work can change the planning needs.
Questions people ask about boring in Wells
Does Trinity take directional boring jobs in Wells, Cherokee County, and how are crews assigned?
Yes. We take work in Wells, Cherokee County, and our crews or vetted partner drilling contractors can staff the job. From the first call through the bore log, we coordinate work around US 69 in Wells, regardless of which crew is on site. For a route on Rusk Street, the address and bore scope help us plan the work.
Who runs the Wells public water system, and where does the water come from?
The City of Wells owns the public water system, supplied by groundwater wells, so we plan utility checks before boring along County Road 1247. Wells’ public system serves 853 people through 404 service connections, figures we consider when planning underground work around Rusk Avenue. If your bore connects near City of Wells water infrastructure, marked lines along the proposed route need to be exposed before drilling near them.
Which electric providers report service in Wells, Cherokee County, and who confirms conduit specs?
Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County. The records do not identify which provider serves every Wells address. Confirm the line owner and conduit specifications for the route before planning a bore along a street such as Rusk Avenue.
Who is responsible for Wells streets like Creek 2734, and must a bore cut the road?
Wells is incorporated, so its city streets belong to the city, including Creek 2734. A directional bore can run beneath street pavement without opening the road when the route and ground allow it. The crossing plan still needs to account for marked utilities and any applicable highway right of way nearby.
What do Wells housing ages along Rusk Avenue mean for replacement bores?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1977, with 32% of homes built before 1960. Those figures do not date the buried lines, but a replacement bore may encounter existing utilities. Along Rusk Avenue, we pothole marked lines before drilling near them.
Could groundwater or flood prone ground affect bore pits near Wells and Red Bayou?
It could. The USDA soil survey maps a seasonal water table within 60 inches across 30% of Wells, so some pits may need pumping. Flood prone soils are not mapped, but Red Bayou is 0.1 miles from the town limits. A proposed creek crossing still needs its own depth and jurisdiction review.
What bore sizes and lengths can you handle for a Wells job on Forest Road?
We handle lines from 3/4 inch service lines up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. For a Forest Road project, the required size and footage help define the equipment and plan. Ground conditions and marked crossings also affect the setup.
How much notice does Texas811 need for a Wells bore along Rusk Street, and what if marks move?
Call Texas811 and describe the planned bore path along Rusk Street. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, request again; worn or moved marks must be refreshed through Texas811 before work resumes.
What affects the cost of a directional bore in Wells near US 69?
The scope drives the price, not just the footage. Woodtell soil and clay below the surface affect drilling, while a US 69 crossing can involve highway requirements. Pipe size, rock, utility exposures, pavement, creek or drainage crossings, pits, excavator time, backfill and mobilization from Yukon also shape the job cost.
Where the Wells facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Wells
- U.S. Census Bureau, TIGER/Line 2024: Wells boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Wells
- U.S. Census Bureau, American Community Survey 2019 to 2023: Wells housing units and year built
- Macrostrat geologic map compilation: map units under Wells
- U.S. EPA Safe Drinking Water Information System: public water systems serving Wells
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cherokee County
- U.S. Geological Survey, Elevation Point Query Service: Wells elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Wells
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Wells
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Wells, Texas
Type the address of your job in Wells. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Wells
Same county: Jacksonville · Rusk · Shadybrook · New Summerfield · Gallatin · Bullard · Reklaw · Cuney. All counties: Texas county list.
