Union Valley Texas Directional Boring: Crockett Loam, Bearpen Creek And FM 35
Quick Answer: Crockett loam gives way to heavy clay below, which can cling to a reamer and grip pipe. We use directional boring, also called horizontal directional drilling (HDD), to route lines beneath Bearpen Creek or Red Oak Drive without cutting across the surface. Union Valley is 256 road miles from our Yukon, Oklahoma main office, and FM 35 can add a state highway crossing to the route. Sticky clay calls for careful fluid control and staged reaming.
Union Valley bores at a glance
- Incorporated city in Hunt County, Texas. Population 511 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 256 miles, about 5.1 hours of driving.
- Ground: Crockett soil is mapped on 37 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 37 percent of the area.
- Highways inside the boundary: FM 35, FM 1565 and Texas State Highway 276. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bearpen Creek and Hurst Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Union Valley near Bearpen Creek?
We take directional boring work in Union Valley, in Hunt County, where the Census Bureau Vintage 2024 estimate puts the population at 511. Water, sewer, gas, electric conduit and fiber can be routed beneath Red Oak Drive, Country Lane or other parts of the local street network. The route and line type determine the bore plan.
Our main office is in Yukon, Oklahoma, and Union Valley work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line on Country Lane and a bore using 48 inch casing beneath FM 35 show the span of work we can handle. Our family business began in 1965, and we have done directional boring since 1982, with FM 35 informing Union Valley crossing plans.

What does the USDA survey show for Union Valley’s Crockett soil?
The USDA soil survey maps Crockett soil across 37% of Union Valley, with Crockett loam on 1 to 3 percent slopes mapped across 36%. At about 40 inches below the surface, clay is the mapped texture across 76% of the area, and the average clay content at that depth is 42%. The survey also maps heavy clay at that depth across 89% of the area. These are area wide soil estimates, not readings from a bore on Red Oak Drive. Sticky clay can build up on a reamer and hold tightly around the pipe.
| USDA soil survey, inside the Union Valley city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 37 percent, Wilson 20 percent, Lufkin 17 percent, Axtell 13 percent and Hopco 9 percent |
| Texture at the surface | loam 69 percent, silt loam 20 percent and silty clay loam 9 percent |
| Texture about 40 inches down | clay 76 percent, clay loam 15 percent and silty clay loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 88 percent and lean clay (CL) 12 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 37 percent of the area (0 percent hard rock, 37 percent weathered rock) |
| Seasonal water table within 60 inches | 32 percent of the area |
| Flood prone soils | 12 percent of the area |
| High corrosion risk for uncoated steel | 83 percent of the area |
The soil survey maps weathered bedrock within 60 inches across 37% of Union Valley, but it assigns no area to hard bedrock within that depth. A seasonal water table is mapped within 40 inches across 32% of the area, so pits near Bearpen Creek may need pumping. Flood prone soils cover 12%, and high steel corrosion risk is mapped across 83%; the line owner should consider casing and tracer wire materials. The geologic map identifies Nacatoch Sand, a Late Cretaceous unit, with silty clay among its local layers.
How do we bore Union Valley clay?
Crockett loam at the surface and heavy clay below call for control of the fluid and the reaming pace. Along Bearpen Creek, we also plan the bore depth around the channel.
- Crockett clay can stick to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
- Because heavy clay is mapped across much of Union Valley, we watch fluid returns near Red Oak Drive to avoid pressure lifting pavement.
- The seasonal water table mapped near the surface can fill pits, so a bore near Bearpen Creek may call for smaller pits and pumping.
- We track the drill head from the surface and log depth and pitch, especially when the route follows the mapped drainage near Hurst Creek.

Which roads, tracks or creeks could a Union Valley bore cross near Red Oak Drive?
FM 35, FM 1565 and Texas State Highway 276 run through Union Valley, so a route beneath one of these roads needs a planned underground crossing. Red Oak Drive is the longest named street in the city at 1.07 miles, followed by Country Lane at 0.99 miles and Val Rose Lane at 0.98 miles. Private Road 2564 runs 0.63 miles within the city. A bore can pass beneath a street or paved drive without cutting across its surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 35 | State highway | 3 roadway miles inside | State highway office |
| FM 1565 | State highway | 2.3 roadway miles inside | State highway office |
| Texas State Highway 276 | State highway | 1.3 roadway miles inside | State highway office |
| Bearpen Creek | Stream | 1.58 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hurst Creek | Stream | 0.61 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
Public mapping shows no railroad inside Union Valley or within a mile outside it, and no street and rail crossing is mapped. Bearpen Creek runs 1.58 channel miles through the city, and Hurst Creek runs 0.61 miles. Four crossings of named streams by mapped streets are shown. A creek route needs depth planning beneath the channel, and its jurisdiction is checked during planning. No lakes or ponds are mapped within a mile.
Who permits a Union Valley bore along FM 35?
FM 35, FM 1565 and Texas State Highway 276 are state highways, so work in their right of way goes through TxDOT. The TxDOT Paris District reviews the utility permit application. The utility that owns the line submits that application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Beneath existing highway pavement, TxDOT rules call for boring or tunneling, with the crossing encased. Red Oak Drive and Country Lane are city streets in incorporated Union Valley. For a crossing of Bearpen Creek or Hurst Creek, jurisdiction of the U.S. Army Corps of Engineers is checked during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities need locating in Union Valley, Hunt County?
The water provider for a specific Union Valley address has to be confirmed with the city, Hunt County or the local water district before a bore is planned. County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near FM 35.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Hunt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Union Valley’s median housing year at 2000; we account for Crockett soils in boring plans. The survey estimates 1% of homes were built before 1960, 50% from 1960 to 1999 and 49% in 2000 or later. That mix can mean a route for a replacement line or a new service near Country Lane. Housing age does not show what is buried at a specific address, so we hydrovac pothole marked utilities on the bore path before drilling close to them.

What is near Union Valley and Royse City?
Union Valley is an incorporated city in Hunt County, with an area of 2.65 square miles and an elevation of 532 feet. On Red Oak Drive, we confirm the service address because Union Valley ZIP codes include 75189 and 75474 for underground work planning. Royse City lies 4.8 miles northwest, and Quinlan is 6.8 miles east; Greenville, the county seat, is 13.7 miles northeast. Union Valley is 256 road miles and a 5.1 hour drive from our Yukon, Oklahoma main office, so we plan mobilization accordingly. That distance is part of planning crew mobilization for a bore near FM 1565.
Places near Union Valley
- Directional boring in Royse City: 4.8 miles northwest
- Directional boring in Quinlan: 6.8 miles east
- Directional boring in Poetry: 7.5 miles south
- Directional boring in Fate: 8.3 miles west
- Directional boring in Caddo Mills: 8.9 miles north
What boring work comes up in Union Valley near Country Lane?
- Highway crossing: A bore beneath FM 35 keeps the road surface intact while the route passes under the state highway.
- Water service: A service bore near Country Lane can connect a property without opening a long trench across the street.
- Fiber route: A fiber conduit beneath Red Oak Drive can avoid cutting its paved surface along the chosen route.
- Creek crossing: A Bearpen Creek bore needs a planned profile beneath the channel and a jurisdiction check during planning.
- Electric conduit: Near FM 1565, we confirm the line owner and expose marked utilities before the drill approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I price a Union Valley bore near Private Road 2564?
A map pin matters near Private Road 2564 because the exact route may change the number of driveways, utilities or drainage features to cross. For a Bearpen Creek crossing, send us the address or pin, what is going in the ground, pipe or conduit size, and footage. A sketch or plans can help us set out the route.
The 256 road miles from Yukon make mobilization part of a Union Valley job’s price. Crockett clay can affect drilling pace, while a crossing beneath FM 35 can add highway planning and casing needs. Price also reflects bore length, pipe or conduit size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work along FM 1565 can change the scope when crossing conditions call for revised boring plans.
Questions people ask about boring in Union Valley
Does Trinity Boring Solutions take directional boring jobs in Union Valley, Hunt County?
Yes. We take work in Union Valley and staff it with our own crews or vetted partner contractor crews from satellite yards. You work with Trinity from the first call through the bore log, including for a route beneath FM 35. Our main office is in Yukon, Oklahoma, 256 road miles from Union Valley, shaping how we coordinate boring project communications.
What does the housing age near Union Valley’s Country Lane mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put the median housing year at 2000, with 50% of homes built from 1960 to 1999 and 49% in 2000 or later. That mix may mean either replacement work or new service near Country Lane. We verify marked utilities before drilling.
Could groundwater or flood prone ground affect a Union Valley bore near Bearpen Creek?
It could affect the pits and the route. The soil survey maps a seasonal water table within 40 inches across 32% of Union Valley, and flood prone soils across 12%. For a Bearpen Creek crossing, we plan the depth beneath the channel and check jurisdiction during planning.
Does Crockett soil in Union Valley corrode steel, and what pipe can we use?
The soil survey maps high steel corrosion risk across 83% of Union Valley, so the line owner should consider materials for steel casing and tracer wire. With Wilson among Union Valley’s soil series, HDPE is not subject to that soil corrosion concern during underground boring. The right pipe depends on the line and the owner’s specifications near Crockett soil.
What ground does a Union Valley bore go through near Crockett soil?
The USDA soil survey maps Crockett soil across 37% of Union Valley. About 40 inches down, clay is mapped across 76% of the area, with clay loam across another 15%. Clay can cling to the reamer, so we control fluid and ream in stages rather than treating the survey as a site test.
Is there rock near the surface on a Union Valley bore route?
Weathered bedrock is mapped within 60 inches across 37% of Union Valley, while the survey assigns no area to hard bedrock in that interval. The mapped geology includes Nacatoch Sand. A site investigation and the actual bore conditions guide the equipment and pace near Bearpen Creek.
How far is Union Valley from Yukon, and does Royse City change mobilization?
Union Valley is 256 road miles from our Yukon, Oklahoma main office, a 5.1 hour drive. Royse City is 4.8 miles northwest of Union Valley, but the job route and crew plan determine mobilization. A map pin near FM 35 helps us assess access and crossing requirements.
How much 811 notice does a Union Valley bore near Red Oak Drive need?
For a bore near Red Oak Drive, submit the Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before work. For Texas State Highway 276 work, we submit a new request if the start moves more than 14 days past the original notice. For a Hurst Creek crossing, we have any worn or moved marks refreshed through Texas811 before work continues.
What affects the price of directional boring in Union Valley near FM 35?
The route, length, pipe or conduit size, ground, utility crossings, pavement, drainage crossings, pits and equipment time all matter. Crockett clay may affect drilling work, and a crossing beneath FM 35 needs highway planning. The 256 road miles from Yukon also factor into mobilization.
Where the Union Valley facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Union Valley
- U.S. Census Bureau, TIGER/Line 2024: Union Valley boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Union Valley
- U.S. Census Bureau, American Community Survey 2019 to 2023: Union Valley housing units and year built
- Macrostrat geologic map compilation: map units under Union Valley
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hunt County
- U.S. Geological Survey, Elevation Point Query Service: Union Valley elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Union Valley
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Union Valley
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Union Valley, Texas
Type the address of your job in Union Valley. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Union Valley
Same county: Greenville · Commerce · West Tawakoni · Wolfe City · Celeste · Lone Oak · Campbell · Hawk Cove · Neylandville. All counties: Texas county list.
