trinityboringsolutions.com

Buna Texas Directional Boring: Kirbyville Loam, Nance Branch and BNSF Railway

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), for routes crossing Buna roads such as Old Bessmay Road without opening the pavement. Buna is 478 road miles from our Yukon, Oklahoma office, so we plan crew mobilization around the route and its crossings. Kirbyville soil is common here, and loam is mapped at about 40 inches, where wet ground can affect the bore. Nance Branch and local utilities also shape the route plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Buna bores at a glance

  • Unincorporated community in Jasper County, Texas. Population 2,137 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 478 miles, about 9.9 hours of driving.
  • Ground: Kirbyville soil is mapped on 52 percent of the area, with loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 96, Texas State Highway 62, FM 1004 and FM 253. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: BNSF Railway, Sabine River and Northern Railroad and Timber Rock Railroad, with 11 mapped street and rail crossings.
  • Named streams inside the boundary: Nance Branch, Long Branch, Cypress Creek and Gum Slough.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Nance Branch in Buna?

Buna is 478 road miles from our Yukon yard, and we staff work with our own crews or vetted partner crews. The Census Bureau counted 2,137 people here in the 2020 Census; it does not publish yearly estimates for this unincorporated place. Along Old Bessmay Road or US 96, we install water, sewer, gas, electric conduit and fiber by directional boring when the route suits the site.

Our main office is in Yukon, Oklahoma, and Buna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and since 1982 we have done directional boring, experience we bring to planning work in Buna. Four decades of drilling helps us plan for Buna’s mapped loam and clay, where wet ground and sticky cuttings can affect the bore.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show for Buna and Kirbyville soil?

The USDA soil survey maps Kirbyville soil across 52% of Buna and Waller soil across 31%. Kirbyville fine sandy loam is mapped on 27% of the area, while Kirbyville Niwana complex covers 25%. About 40 inches below the surface, the survey maps loam across 84% of the area and sandy clay loam across 8%. The mapped soil classification at that depth is mostly CL, at 92%; sandy classifications account for 5%. These are mapped patterns for planning a crossing in Buna, not test borings. The clay can hold a hole open but may stick to the reamer and grip pipe.

USDA soil survey, inside the Buna mapped community boundaryWhat is mapped
Soil series mappedKirbyville 52 percent, Waller 31 percent, Otanya 8 percent and Hatliff 5 percent
Texture at the surfacevery fine sandy loam 33 percent, silt loam 31 percent and fine sandy loam 27 percent
Texture about 40 inches downloam 84 percent, sandy clay loam 8 percent and fine sandy loam 5 percent
Engineering class about 40 inches downlean clay (CL) 92 percent and silty clayey sand (SC SM) 5 percent
Average clay content about 40 inches down23 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches92 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel84 percent of the area

Bedrock is not mapped within the top five feet, which does not rule out deeper rock. Seasonal water tables are mapped within 60 inches across 92% of the area and within 40 inches across 84%, so pits near Buna roads may need pumping. Flood prone soils cover 6%. High steel corrosion risk is mapped across 84%, a reason for the line owner to consider casing and tracer wire materials; HDPE avoids that steel concern. The geologic map unit is Delta silt and clay of Pleistocene age, so soft, compressible ground is part of the planning picture.

How do we drill Buna’s loam and Kirbyville soil?

The USDA maps loam at about 40 inches in much of Buna, with clay rich ground also common. We match the drilling fluid and reaming sequence to the route, then keep the pipe ready for the pull.

  1. Where Kirbyville soil is clay rich, we use a thinner drilling fluid and ream in stages to limit sticky buildup, then pull the pipe while the hole is ready.
  2. Because seasonal water is mapped within 40 inches across 84% of Buna, we keep pits small and pump water as needed, especially near Nance Branch.
  3. On loam and silt loam routes, we control fluid pressure beneath pavement so soft ground does not wash out or weaken steering near Old Bessmay Road.
  4. Before the drill approaches marked utilities on Main Street, we expose them with hydrovac potholing, then track the head from the surface and log depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross near Old Bessmay Road in Buna?

US 96 has 6.3 mapped roadway miles inside Buna’s community boundary. Texas State Highway 62 has 2.0 miles, FM 1004 has 1.2 miles and FM 253 has 0.4 miles. TxDOT routes need a planned bore beneath existing pavement rather than an open trench unless the district engineer gives written approval. Old Bessmay Road is the longest named street at 2.33 miles inside the community. Main Street runs 2.02 miles, and Lewis Road runs 1.07 miles, so the route and access points matter when laying out pits.

CrossingTypeMapped extentWho has a say
US 96US highway6.3 roadway miles insideState highway office
Texas State Highway 62State highway2 roadway miles insideState highway office
FM 1004State highway1.2 roadway miles insideState highway office
FM 253State highway0.4 roadway miles insideState highway office
BNSF RailwayRailroad5.66 track miles insideThe railroad
Sabine River and Northern RailroadRailroad1.68 track miles insideThe railroad
Timber Rock RailroadRailroad0.24 track miles insideThe railroad
Nance BranchStream0.9 channel miles insideChecked for Corps of Engineers jurisdiction
Long BranchStream0.8 channel miles insideChecked for Corps of Engineers jurisdiction
Cypress CreekStream0.67 channel miles insideChecked for Corps of Engineers jurisdiction
Gum SloughStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Strawther BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Red Bank CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 5.66 track miles inside Buna, while Sabine River and Northern Railroad has 1.68 and Timber Rock Railroad has 0.24. Public mapping shows 11 street and rail crossings in the community. Nance Branch runs 0.9 channel miles, Long Branch 0.8 and Cypress Creek 0.67; four mapped street crossings cross named streams. A creek route needs depth planning beneath the channel, and its jurisdiction is checked during planning.

Who approves a bore in Buna and Jasper County?

Buna is an unincorporated community, so Jasper County handles its local streets rather than a city government. For work in the right of way of US 96, Texas State Highway 62, FM 1004 or FM 253, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Beaumont District reviews it. TxDOT cover requirements set the depth under those highways, including 60 inches for electric and communication lines at crossings, with the permit able to set another depth. A BNSF Railway route needs that railroad’s crossing agreement. Nance Branch crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Jasper County near Buna?

The provider serving a specific Buna address has to be confirmed with Jasper County or the local water district before a bore is planned; the available records do not identify a provider for this community. Electric utilities reporting service in Jasper County are Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. Before planning conduit along Lewis Road or another route, we confirm the line owner for that address. Hydrovac potholing lets us expose marked lines before drilling near them.

Line ownerWhat it isSourceSize
Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric CooperativeElectric utilities reporting service in Jasper CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Buna’s median housing year is 1995 in the American Community Survey 2019 to 2023 five year estimates, a context for planning underground work. It estimates 11% of homes were built before 1960, 46% from 1960 to 1999 and 43% in 2000 or later. That mix can mean a Main Street project involves either replacement of an older line or a newer service connection; the address and plans tell us which. We pothole marked utilities on the bore path before drilling near them because surface marks do not show depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Buna from Silsbee and our Yukon office?

Buna is an unincorporated community in Jasper County, with 5.99 square miles of mapped land and an elevation of 81 feet. Its ZIP code is 77612. Evadale is 9.7 miles southwest, Silsbee is 14.5 miles southwest, Deweyville is 14.9 miles southeast and Kirbyville is 15.3 miles north. Jasper, the county seat, is 33.2 miles north; Silsbee is the nearest larger city listed. The Yukon yard is 478 road miles away, a 9.9 hour drive, so distance is part of planning mobilization for a Buna bore.

Places near Buna

Which jobs call for a bore near Main Street in Buna?

  • Highway crossing: A bore beneath US 96 keeps the roadway surface intact while the utility route passes under the highway right of way.
  • Street service: A water or sewer line along Lewis Road can be bored between pits instead of cutting across the pavement.
  • Creek crossing: A route beneath Nance Branch is planned to pass below the channel, with the crossing checked for federal jurisdiction.
  • Rail crossing: A bore beneath BNSF Railway needs the railroad’s agreement and a route plan that fits its crossing conditions.
  • Fiber conduit: A conduit run along Main Street can avoid open cuts across the street and nearby driveways.
  • Electric conduit: Before a conduit bore near Old Bessmay Road, we confirm the electric line owner and expose marked utilities along the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Buna bore near BNSF Railway?

For a quote near BNSF Railway or Main Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and crossings. If the route follows US 96, include the highway location so we can account for the TxDOT right of way.

We set the price from the ground, crossings and logistics. Kirbyville loam and clay affect drilling and reaming; the seasonal water table can add pit pumping. A route near BNSF Railway or US 96 brings crossing and permit details into the plan. Length, pipe size, marked utilities, pavement, creek crossings, pits and excavator time also matter. At 478 road miles from Yukon, mobilization is part of the Buna job scope.

Questions people ask about boring in Buna

Does Trinity take directional boring work in Jasper County near Buna?

Yes. We take directional boring work in Buna and across Texas, with our own crews and partner drilling contractors we have vetted. The customer works with Trinity from the first call through the bore log, whichever crew is on site. For a route near Nance Branch, the scope and access help determine the crew plan.

Who looks after Lewis Road in Buna, and can a bore avoid cutting it?

Buna has no city government because it is an unincorporated community, so Jasper County is responsible for local streets such as Lewis Road. Directional boring can pass a line below the road without cutting the pavement. The route still needs utility locating and suitable pit locations on each side.

Do Buna’s home ages near Main Street affect replacement bores?

They can affect what the project needs, but home age alone does not establish the age or location of a buried line. The American Community Survey estimates a 1995 median housing year for Buna. A Main Street project may replace an older line or add a service, so we check the route and expose marked utilities before drilling.

Will water or flood prone ground affect bore pits near Nance Branch in Buna?

It can. The USDA soil survey maps seasonal water tables within 40 inches across 84% of Buna, and flood prone soils across 6%. Near Nance Branch, we plan pit placement and pumping for wet ground and plan the crossing depth beneath the channel.

Can Kirbyville soil in Buna corrode steel, and what pipe should I use?

The survey maps high steel corrosion risk across 84% of Buna, so the line owner should consider casing and tracer wire materials. In Buna, HDPE is not affected by soil corrosion, a material property we consider when planning underground boring. The owner selects any coating for steel, and the route and service requirements determine what pipe or casing is appropriate near Kirbyville soil.

What ground does a bore pass through in Buna’s Kirbyville soil?

The USDA soil survey maps Kirbyville soil across 52% of Buna. At about 40 inches below the surface, loam is mapped across 84% of the area, with a mostly CL classification. These are survey patterns, not test borings. Clay can hold the hole open but may stick to the reamer and grip pipe.

How much notice does Texas811 need for a Buna bore near Old Bessmay Road?

The locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Buna start slips more than 14 days past the original notice, we require a new request. For an Old Bessmay Road route, worn or moved marks must be refreshed through Texas811 before work continues.

Does Buna’s distance from Yukon change a job near Silsbee?

Buna is 478 road miles and a 9.9 hour drive from our Yukon, Oklahoma office. That distance can affect mobilization planning for a job near Silsbee, which is 14.5 miles southwest of Buna. The route, crew schedule, equipment and crossing scope all help shape the plan.

What affects the price of directional boring in Buna near US 96?

The job’s length and pipe size matter, along with Kirbyville clay and loam, utility crossings, pavement, creek crossings, pits and excavator time. Work in the US 96 right of way also needs the utility owner’s TxDOT permit. Mobilization from Yukon is another job factor because Buna is 478 road miles away.

Where the Buna facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Buna

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Buna, Texas

Type the address of your job in Buna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Buna

Same county: Jasper · Sam Rayburn · Browndell. All counties: Texas county list.