Jacksboro Texas Directional Boring: Bonti Soil, Lost Creek and US 281
Quick Answer: US 281 and Lost Creek are key obstacles for utility routes in Jacksboro, and we do directional boring, also called horizontal directional drilling (HDD), in this Texas city. The Yukon, Oklahoma main office is 203 road miles away, so a route near Main Street and the job scope affect mobilization. Bonti soil is common here, while mapped bedrock can make the drill advance slower. We plan the path, expose marked utilities and keep pavement and creek banks uncut.
Jacksboro bores at a glance
- County seat of Jack County, Texas. Population 4,656 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 203 miles, about 4.2 hours of driving.
- Ground: Bonti soil is mapped on 19 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 76 percent of the area.
- Highways inside the boundary: US 281, US 380, Texas State Highway 114, Texas State Highway 59 and Texas State Highway 199. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Lost Creek, Little Cleveland Creek and Spillers Branch.
- Public water: City of Jacksboro, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Lost Creek in Jacksboro?
We take directional boring work in Jacksboro, the Jack County seat, where the Census Bureau Vintage 2024 estimate puts the population at 4,656. Along Main Street or near Lost Creek, we install water, sewer, gas, electric conduit and fiber with a bore planned for the route and existing lines. The path and the line owner determine what needs checking before the drill starts.
Our main office is in Yukon, Oklahoma, and Jacksboro work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, which matters where a new bore meets lines serving the City of Jacksboro water system or electric service reported in Jack County. For bore planning near US 281 in Jacksboro, our family business began in 1965, and we have done directional boring since 1982.

What kind of ground does Bonti soil mean for a Jacksboro bore?
The USDA soil survey maps Bonti soil across 19% of Jacksboro, with Hensley loam at 17%, Exray soil at 16% and Truce soil at 13%. Fine sandy loam is the most common surface texture, mapped across 32% of the city. At about 40 inches below the surface, bedrock is mapped across 58% and clay across 20%; average clay content at that depth is 38%. These are mapped patterns, not test borings, so the route still needs site specific planning.
| USDA soil survey, inside the Jacksboro city limits | What is mapped |
|---|---|
| Soil series mapped | Bonti 19 percent, Hensley 17 percent, Exray 16 percent, Truce 13 percent and Thurber 5 percent |
| Texture at the surface | fine sandy loam 32 percent, extremely stony loam 17 percent and very stony fine sandy loam 16 percent |
| Texture about 40 inches down | bedrock 58 percent, clay 20 percent and loam 4 percent |
| Engineering class about 40 inches down | lean clay (CL) 25 percent and fat clay (CH) 6 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 76 percent of the area (39 percent hard rock, 37 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 65 percent of the area |
Bedrock is mapped within 60 inches across 76% of Jacksboro, with hard bedrock across 39% and weathered bedrock across 37%; typical depth is 30 inches. That can call for slower drilling or a rock tool where the formation is hard. Seasonal water tables are not mapped within 60 inches, and flood prone soils cover 5%, including areas to consider near Lost Creek. High steel corrosion risk is mapped across 65%, so the line owner should consider casing and tracer wire materials. The Thrifty and Graham Formations, undivided, of Gzhelian age include shale, sandstone and limestone.
How do we drill through Jacksboro bedrock and soil?
We plan for Jacksboro’s shallow mapped bedrock and clay before setting the bore path. A walkover locator follows the drill head from the surface, while depth and pitch readings help keep the route on line near Lost Creek and local streets.
- Where Jacksboro’s mapped clay holds the hole open, we use drilling fluid suited to the ground and ream in stages to limit sticky buildup around the tooling.
- If the route reaches the shallow bedrock mapped around Jacksboro, we slow the advance and select a tool for the formation rather than treating it like loose soil.
- Near Lost Creek, we plan depth beneath the channel and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
- On a route near College Street, we hydrovac expose marked utilities before the drill approaches; the walkover locator tracks depth and pitch as the bore advances.

Which roads, tracks or creeks could a Jacksboro bore cross near Main Street?
US 281, US 380, Texas State Highway 114 and Texas State Highway 59 run through Jacksboro, along with Texas State Highway 199, FM 3344 and Texas State Highway 148. A crossing beneath an existing highway pavement is bored or tunneled rather than open cut. Main Street is the longest named street at 4.1 miles in the city; Belknap Street runs 1.93 miles and College Street runs 1.84 miles. Those routes can bring pavement, driveways and buried lines into the bore plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 4.6 roadway miles inside | State highway office |
| US 380 | US highway | 3.7 roadway miles inside | State highway office |
| Texas State Highway 114 | State highway | 4.6 roadway miles inside | State highway office |
| Texas State Highway 59 | State highway | 2.8 roadway miles inside | State highway office |
| Texas State Highway 199 | State highway | 2.3 roadway miles inside | State highway office |
| FM 3344 | State highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 148 | State highway | 1.6 roadway miles inside | State highway office |
| Lost Creek | Stream | 6.06 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Cleveland Creek | Stream | 0.93 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Spillers Branch | Stream | 0.89 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Halls Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Lake Jacksboro | Lake or pond | 123 acres, inside | Checked for Corps of Engineers jurisdiction |
| Johnson Lake | Lake or pond | 54 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Jacksboro or within one mile outside its limits, so no mapped track crossing is part of the local route picture. Lost Creek runs 6.06 channel miles inside the city, and seven mapped street crossings of named streams make drainage checks relevant. Little Cleveland Creek and Spillers Branch also run through town. Lake Jacksboro is inside the limits, so a route near its shore needs to account for the water crossing during planning.
Do I need a permit to bore beneath US 281 in Jacksboro?
For work in the US 281, US 380 or state highway right of way in Jacksboro, the line owner files the utility application through TxDOT’s online RULIS system, not the driller. We prepare the bore plan and profile for that filing and work under the owner’s permit. The TxDOT Fort Worth District reviews it. TxDOT rules call for boring or tunneling beneath existing highway pavement, with casing at crossings and a bore extending beneath all travel lanes on rural highways. Electric and communication crossings need 60 inches of cover below the lowest crossed grade; water crossings need 60 inches and pressurized sewer crossings need 60 inches. The district can set another depth in the permit. Lost Creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. Jacksboro city streets belong to the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Jack County near Jacksboro?
The City of Jacksboro public water system draws from surface water and reports 1,978 service connections serving 4,397 people. Electric service reported in Jack County includes Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and Wise Electric Cooperative. Those county reports do not identify the provider at every address, so we confirm the line owner before planning a conduit bore near a Jacksboro water or electric route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Jacksboro | Public water system | Surface water | 1,978 connections, 4,397 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Jack County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Jacksboro’s median housing year at 1969; 36% of homes were built before 1960, 58% from 1960 to 1999 and 6% in 2000 or later. Replacement work near Belknap Street may meet older buried lines, while a new service can need a longer route from the main. We hydrovac pothole marked utilities on the path before drilling near them, because surface paint does not show depth.

Where is Jacksboro in relation to Perrin and our Yukon yard?
Jacksboro is in Jack County, covers 7.23 square miles and sits at an elevation of 1,093 feet. Its ZIP code is 76458, and it is the county seat. Perrin is 14.2 miles south; Bryson is 13.9 miles west. Mineral Wells, the nearest larger city listed, is 28.2 miles south. From our Yukon, Oklahoma main office, Jacksboro is 203 road miles away, a 4.2 hour drive. Those distances matter when planning crew mobilization for work near US 281 or Lost Creek.
Places near Jacksboro
- Directional boring in Bryson: 13.9 miles west
- Directional boring in Perrin: 14.2 miles south
- Directional boring in Runaway Bay: 16.8 miles east
- Directional boring in Lake Bridgeport: 19 miles east
- Directional boring in Graford: 20.6 miles south
- Directional boring in Mineral Wells: 28.2 miles south
Which jobs call for a bore near College Street in Jacksboro?
- Highway crossing: A route beneath US 281 needs a permitted bore plan, with the line owner filing through TxDOT.
- Water service: A connection near the City of Jacksboro water system needs a route checked against existing lines before drilling.
- Fiber conduit: A run along Main Street can pass beneath pavement without cutting the street surface.
- Creek crossing: A route beneath Lost Creek needs depth planning and a jurisdiction check during the crossing review.
- Street replacement: A bore near Belknap Street can replace an aging line while avoiding an open cut through pavement.
- Lake route: Work near Lake Jacksboro needs a plan that accounts for the water edge and access for the drilling equipment.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Old Post Oak Road in Jacksboro?
For a quote near Old Post Oak Road, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us lay out the route. Tell us about nearby pavement, utilities or a Lost Creek crossing so we can assess the site details that shape the bore.
The biggest price question is the ground: Bonti soil is common, and bedrock is mapped shallow across much of Jacksboro, which can change tooling and drilling time. Next, we look at bore length and line size, then marked utilities to expose along roads such as Old Post Oak Road. Concrete or pavement, pits, excavator time, backfill and drainage crossings near Lost Creek also affect the work. Mobilization reflects the 203 road miles from Yukon.
Questions people ask about boring in Jacksboro
Does Trinity take directional boring work in Jacksboro and Jack County, and how are crews assigned?
Yes. We take directional boring jobs in Jacksboro and across Texas. Our own crews handle the work, with satellite yards operated by drilling contractor partners we have vetted. You work with Trinity from the first call through the bore log, whether the crew is working near US 281 or elsewhere in Jack County.
Who controls College Street in Jacksboro, and does a bore require cutting it?
College Street is a city street, so it belongs to the City of Jacksboro. A directional bore can pass beneath its pavement without an open cut through the road. We still plan around utilities along the route and expose marked lines before drilling near them.
Could older buried lines affect a replacement bore near Belknap Street in Jacksboro?
They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1969, with 36% of homes built before 1960. That makes utility exposure important for replacement work near Belknap Street. We hydrovac pothole marked lines on the bore path before the drill gets near them.
Can Bonti soil around Jacksboro corrode steel pipe, and what pipe should we use?
The USDA soil survey maps high steel corrosion risk across 65% of Jacksboro. That is a reason for the line owner to consider casing and tracer wire materials; the owner selects any coating. HDPE does not share the soil corrosion concern, but the right pipe depends on the line and job requirements.
What ground could a bore meet in Bonti soil around Jacksboro?
The USDA soil survey maps Bonti soil across 19% of Jacksboro and fine sandy loam across 32% of the surface. At about 40 inches down, bedrock is mapped across 58% and clay across 20%. These are soil survey patterns, not test borings, so the route may need a site check.
How much bedrock is mapped within five feet of the surface in Jacksboro?
Bedrock is mapped within 60 inches across 76% of Jacksboro. The mapped area includes 39% hard bedrock and 37% weathered bedrock, with a typical depth of 30 inches. A bore may need slower progress or rock tooling depending on what the actual route encounters.
What bore sizes and lengths can Trinity handle for a job near Old Post Oak Road in Jacksboro?
For bore planning around Main Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a route near Old Post Oak Road, the pipe or conduit size, footage and mapped bedrock all help determine the equipment and plan.
How early should I request Texas811 marks for a Jacksboro bore near Main Street?
For a Main Street bore, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For coordination with TxDOT Fort Worth District on a Jacksboro request, we submit a new request if the start moves more than 14 days past the original notice. At Lost Creek crossings, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the price of directional boring near US 281 in Jacksboro?
The route, length, pipe or conduit size and ground conditions all matter. Shallow mapped bedrock around Jacksboro can change drilling time, while a US 281 crossing brings permit planning and highway conditions into scope. Exposed utilities, pavement, pits, drainage crossings and the 203 road miles from Yukon can also affect the job.
Where the Jacksboro facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Jacksboro
- U.S. Census Bureau, TIGER/Line 2024: Jacksboro boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Jacksboro
- U.S. Census Bureau, American Community Survey 2019 to 2023: Jacksboro housing units and year built
- Macrostrat geologic map compilation: map units under Jacksboro
- U.S. EPA Safe Drinking Water Information System: public water systems serving Jacksboro
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jack County
- U.S. Geological Survey, Elevation Point Query Service: Jacksboro elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Jacksboro
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Jacksboro
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Jacksboro, Texas
Type the address of your job in Jacksboro. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Jacksboro
All counties: Texas county list.
