trinityboringsolutions.com

Perrin Texas Directional Boring: Winters Loam, US 281 and Two Bush Branch

Quick Answer: Perrin is an unincorporated community in Jack County, and we do directional boring, also called horizontal directional drilling (HDD), for routes under US 281 and other local crossings. Two Bush Branch is part of the route planning, and Perrin is 218 road miles from our Yukon, Oklahoma main office. The USDA soil survey maps clay at 40 inches across much of the area, so the bore plan accounts for sticky ground. Mark Street and other public roads are under county or state authority, not a city government.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Perrin bores at a glance

  • Unincorporated community in Jack County, Texas. Population 346 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 218 miles, about 4.6 hours of driving.
  • Ground: Winters soil is mapped on 24 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 17 percent of the area.
  • Highways inside the boundary: US 281 and FM 2210. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Two Bush Branch.
  • Public water: Perrin Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring near Two Bush Branch in Perrin?

Perrin is an unincorporated community in Jack County, so its public streets are not managed by a city government. The Census Bureau counted 346 residents in 2020; it does not publish yearly estimates for unincorporated places. We install water and sewer lines along roads such as Mark Street, and electric conduit, gas lines and fiber can be routed to properties or across local roads where the plans allow.

Our main office is in Yukon, Oklahoma, and Perrin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, and our family business started in 1965, with directional boring since 1982. That record matters when planning around Perrin Water System connections and electric service reported in Jack County.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a directional bore expect in Perrin near Winters soil?

The USDA soil survey maps Winters loam across 24 percent of Perrin, with Thurber clay loam at 20 percent and Truce fine sandy loam at 16 percent. Surface textures are mostly loam and fine sandy loam, while the material at 40 inches changes: clay is mapped across 38 percent and sandy clay across 24 percent. Average clay content at that depth is 34 percent, and heavy clay is mapped across 63 percent. Winters, Thurber, Truce, and Gowen are mapped soil survey patterns, not test borings, so we verify conditions along the bore path. Clay can cling to a reamer, so the bore plan needs to account for sticky cuttings and changing ground.

USDA soil survey, inside the Perrin mapped community boundaryWhat is mapped
Soil series mappedWinters 24 percent, Thurber 20 percent, Truce 16 percent, Gowen 15 percent and Bastsil 12 percent
Texture at the surfaceloam 41 percent, fine sandy loam 38 percent and clay loam 20 percent
Texture about 40 inches downclay 38 percent, sandy clay 24 percent and loam 15 percent
Engineering class about 40 inches downlean clay (CL) 69 percent, fat clay (CH) 20 percent and silty sand (SM) 10 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches17 percent of the area (0 percent hard rock, 17 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils25 percent of the area
High corrosion risk for uncoated steel62 percent of the area

Weathered bedrock is mapped within 60 inches across 17 percent of Perrin, with a typical depth of 54 inches; the geologic map names Wolf Mountain Shale of Kasimovian age. That material can slow drilling compared with soil. No seasonal water table is mapped within 60 inches, but flood prone soils cover 25 percent, which matters near Two Bush Branch. For bores near Hackley Road, we account for the mapped high steel corrosion risk across 62 percent when selecting casing and tracer wire materials. The mapped ground helps plan, but it does not replace site checks.

How do we plan a clay bore in Perrin, where Winters and Thurber are among the mapped soil series?

Perrin’s mapped clay at 40 inches can stick to the reamer and grip pipe. We set the bore plan around the route, including whether it approaches Two Bush Branch or passes beneath US 281.

  1. Clay mapped at 40 inches can ball up on the reamer, so we use a thinner drilling fluid with polymer and open the hole in stages.
  2. Where heavy clay is mapped around Perrin, we watch fluid returns and keep pressure controlled near pavement such as US 281.
  3. If a route meets weathered Wolf Mountain Shale, we allow for slower drilling and track the head through the soil to rock change.
  4. Near flood prone soils along Two Bush Branch, we plan the bore depth below the channel and check whether Corps jurisdiction applies.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a Perrin bore cross near US 281?

US 281 runs 1.6 mapped roadway miles inside Perrin’s community boundary, and FM 2210 adds 1.2 miles. The USDA soil survey also maps Winters loam and clay loam along the community, which can affect the pits and bore path near these roads. Among the named streets, Hackley Road runs 1.19 miles inside the boundary, Back Cemetary Road 0.7 miles, and Mark Street 0.65 miles. A bore can pass below pavement rather than cut across it, subject to the route and permits.

CrossingTypeMapped extentWho has a say
US 281US highway1.6 roadway miles insideState highway office
FM 2210State highway1.2 roadway miles insideState highway office
Two Bush BranchStream3.41 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Perrin or within one mile outside the community boundary, and no mapped street and rail crossings are listed. Two Bush Branch runs 3.41 channel miles inside the boundary, with four mapped street crossings of named streams. That makes creek alignment and access relevant when a route crosses the branch. No lakes or ponds are mapped within one mile, so the main mapped water feature to plan around is Two Bush Branch.

Who approves a Perrin bore in Jack County?

Perrin has no city government, so public street authority rests with Jack County or the state, depending on the road. A bore in the right of way of US 281 or FM 2210 needs a TxDOT utility permit, reviewed by the TxDOT Fort Worth District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT rules require boring or tunneling under existing highway pavement, with the bore extending beneath all travel lanes on rural highways.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Perrin Water System and other lines in Perrin?

The private Perrin Water System uses groundwater wells and has 136 service connections serving 408 people. That makes its route and connection locations important before a bore crosses a water line. Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric Cooperative report service in Jack County; the line owner for the specific location must be confirmed before planning electric conduit. Near Two Bush Branch, hydrovac potholing can expose marked water and electric lines before drilling approaches them.

Line ownerWhat it isSourceSize
Perrin Water SystemPublic water systemGroundwater wells136 connections, 408 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Jack CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Perrin’s median housing year is 1965 in the American Community Survey 2019 to 2023 five year estimates, so we verify existing utilities before boring. It estimates 35 percent of housing was built before 1960, and 65 percent from 1960 to 1999. That age can mean a project replaces an older service along Mark Street rather than serving new construction. Before drilling near any marked line, we use hydrovac potholing to check its depth; paint alone does not show how deep a line sits.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Perrin, Jacksboro and nearby rural sites?

Perrin is in Jack County, covers 1.59 square miles of mapped community area and sits at an elevation of 1,049 feet. ZIP code 76486 serves the area. Graford is 12.3 miles southwest, Jacksboro is 14.2 miles north, and Mineral Wells is 14.6 miles south; Mineral Wells is the nearest larger city, and Jacksboro is the county seat. Perrin is 218 road miles and a 4.6 hour drive from our Yukon, Oklahoma yard. We take work across Texas, including routes beyond the mapped boundary around US 281 and FM 2210.

Places near Perrin

What could we bore near Mark Street in Perrin?

  • Highway crossing: A route beneath US 281 needs a bore plan that accounts for the travel lanes and the TxDOT right of way.
  • Water service: A connection near Mark Street can be planned around the Perrin Water System and its groundwater well supply.
  • Fiber route: Fiber conduit along Hackley Road can be bored beneath pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A line beneath Two Bush Branch needs a planned depth that stays below the channel and accounts for flood prone soils.
  • Electric conduit: A route near Back Cemetary Road needs the electric line owner confirmed before conduit size and alignment are set.
  • Rural service: A bore outside Perrin’s mapped boundary can reach properties near Graford, with access and mobilization included in planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Perrin bore near Back Cemetery Road?

A map pin near Back Cemetery Road shows which side of the road a bore starts from and where it needs to end. That exact position matters if the route approaches Two Bush Branch or a marked utility. For a bore near Mark Street, send us the address or pin, planned installation, pipe or conduit size, and footage. A sketch or plans help us assess the route.

A short route on Winters loam with clear access can be simpler to plan than a longer bore near Two Bush Branch. Price depends on length, pipe or conduit size, soil and rock, and how many utilities need to be crossed and exposed. Pavement on US 281, creek crossings, pits, excavator time and sand backfill can add work. Mobilization also reflects Perrin’s 218 road miles from Yukon, and emergency or high profile work can change the scope.

Questions people ask about boring in Perrin

Does Trinity take directional boring jobs in Perrin and Jack County?

Yes. We take directional boring work across Texas, including Perrin and rural sites in Jack County. Our own crews and partner contractors from satellite yards handle the field work, while Trinity remains the contact from planning through the bore log. Routes near US 281 can be assessed from the address, plans and line details.

Can a line be bored under Two Bush Branch in Perrin?

A bore under Two Bush Branch can be planned around the channel, but the route and ground conditions determine the design. The branch has 3.41 channel miles inside Perrin, and flood prone soils are mapped across 25 percent of the area. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who runs Perrin’s public water system in Jack County, and where does its water come from before we plan nearby boring work?

The Perrin Water System is privately owned and draws water from groundwater wells. It has 136 service connections and serves 408 people. Before planning a bore near Mark Street or another local road, the water line route and connection point need to be identified so the drill path can avoid existing lines.

Which electric company serves my Perrin, Jack County address, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric Cooperative report electric service in Jack County. That list does not identify the provider for every Perrin address. We confirm the line owner for the specific location before planning a conduit bore near US 281 or another road, including the conduit requirements.

Who controls Mark Street in Perrin, and does a bore require cutting it?

Perrin is unincorporated and has no city government, so public streets such as Mark Street fall under county authority unless the road is state controlled. A directional bore can pass beneath pavement without an open cut, subject to route conditions and any required approval. Mark Street is mapped for 0.65 miles inside the community boundary.

Are lines near Back Cemetary Road in Perrin old, and can they be replaced by bore?

The American Community Survey 2019 to 2023 estimates Perrin’s median housing year at 1965, with 35 percent of homes built before 1960. That age can mean a project replaces an existing service near Back Cemetary Road. We locate and expose marked utilities along the route before drilling, since older services may not be shown at their actual depth by surface marks.

Does Trinity cover Graford and rural sites outside Perrin?

Yes. We take work across Texas, including Graford and rural locations outside Perrin’s mapped community boundary. Graford is 12.3 miles southwest of Perrin, and routes beyond the boundary can have different access and mobilization needs. Send the location and proposed route near US 281 or another local road for review.

How much notice does Texas811 need for a bore near Hackley Road in Perrin?

For a bore near Hackley Road, request utility locates from Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. If a Perrin start near US 281 moves more than 14 days past the original notice, we make a new request. Along FM 2210, we refresh any marks that wear off or move through Texas811 before continuing the bore.

What affects the cost of directional boring near US 281 in Perrin?

The route and work required determine the price. For a bore near US 281, factors include footage, pipe or conduit size, Winters loam or clay conditions, pavement, and the number of utilities to expose. A route near Two Bush Branch can involve creek planning, while pits, excavator time, backfill and mobilization from Yukon also affect the job.

Where the Perrin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Perrin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Perrin, Texas

Type the address of your job in Perrin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Perrin

Same county: Bryson. All counties: Texas county list.