Garner Texas Directional Boring: Chaney Soil, FM 113 And Dry Creek
Quick Answer: Trinity drills beneath FM 113 with directional boring, also called horizontal directional drilling (HDD), while leaving pavement intact. Maddux Road, Hobson Bend Road and Old Garner Road lead the street list; 12.63 public road miles are inside Garner’s mapped community boundary. Dry Creek runs 3.3 channel miles through the community. Garner is 237 road miles from our Yukon yard, a distance considered in mobilization. Chaney loamy sand covers 30 percent, while sandy clay about 40 inches down can grip pipe.
Garner bores at a glance
- Unincorporated community in Parker County, Texas. Population 397 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 237 miles, about 5 hours of driving.
- Ground: Chaney soil is mapped on 30 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 82 percent of the area.
- Highways inside the boundary: FM 113. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Dry Creek and Patterson Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can bore beneath FM 113 in Garner?
We take directional boring work in Garner beneath FM 113 and along local streets in Parker County. Maddux Road, Hobson Bend Road and Old Garner Road are the longest named streets; 12.63 public road miles are inside the mapped community boundary, crossed by Dry Creek. The Census Bureau counted 397 residents in 2020; water, sewer, gas, electric conduit and fiber lines can run along Garner roads.
Our main office is in Yukon, Oklahoma, and Garner work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa with 48 inch pipe; a typical Garner job beside FM 113 is smaller in scope. We are a family business dating to 1965, with directional boring work since 1982, and bring that experience to Texas routes such as FM 113.

What is Chaney soil like to bore in Garner?
Chaney loamy sand is the leading mapped soil in Garner, covering 30 percent of the area in the USDA soil survey. Fine sandy loam covers 38 percent at the surface, but the mix changes below. At about 40 inches, the survey maps sandy clay under 44 percent of Garner, clay under 23 percent and bedrock under 22 percent. Average clay content at that depth is 40 percent, while sandy ground is mapped under only 1 percent. These are mapped patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Garner mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Chaney 30 percent, Bonti 21 percent, Windthorst 14 percent, Truce 10 percent and Shatruce 9 percent |
| Texture at the surface | fine sandy loam 38 percent, loamy sand 30 percent and gravelly sandy loam 9 percent |
| Texture about 40 inches down | sandy clay 44 percent, clay 23 percent and bedrock 22 percent |
| Engineering class about 40 inches down | lean clay (CL) 70 percent and fat clay (CH) 5 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | 82 percent of the area (1 percent hard rock, 82 percent weathered rock) |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 69 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 82 percent of Garner, mostly weathered material; hard bedrock is mapped under 1 percent, and typical depth is 42 inches. A soft rock bit may be needed where the route meets weathered rock. Seasonal water table is mapped within 60 inches under 5 percent, and flood prone soils under 2 percent, so pits and Dry Creek routes need attention. High steel corrosion risk covers 69 percent. The Early Cretaceous Twin Mountains Formation includes sandstone, claystone and conglomerate, adding changing ground conditions along the bore.
What does it take to bore Garner’s sandy clay?
Garner’s sandy clay and frequent weathered bedrock call for controlled fluid and staged reaming. On a route near Dry Creek, we also plan the bore depth and pit locations around the channel and surrounding ground.
- At Chaney loamy sand, we use drilling fluid to support the hole and ream in stages, with the pipe ready before the final pass.
- Where Garner’s sandy clay grips the reamer, we manage fluid returns and use thinner fluid with polymer to limit sticking.
- If a bore meets the mapped weathered bedrock common in Garner, we slow down and use a suitable hard soil bit.
- Before a route near Dry Creek advances, we expose marked utilities with hydrovac potholing and track the head’s depth and pitch.

Where might a Garner line go under Dry Creek?
FM 113 is the state highway through Garner, with 2.3 roadway miles inside the mapped community boundary; US 180 is 0.9 miles beyond it. A route under FM 113 needs a bore plan that meets highway cover and pavement requirements. Maddux Road runs 1.88 miles inside Garner, Hobson Bend Road 1.22 miles and Old Garner Road 1.2 miles. Those local streets help define service routes, while concrete, pavement and driveway crossings affect pit access and the bore profile.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 113 | State highway | 2.3 roadway miles inside | State highway office |
| US 180 | Highway nearby | 0.9 miles outside | State highway office |
| Dry Creek | Stream | 3.3 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Patterson Branch | Stream | 0.54 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Grassy Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Rippy Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Mineral Wells | Lake or pond | 401 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Garner or within one mile beyond its boundary, and no street and rail crossing is mapped to plan around. Dry Creek runs 3.3 channel miles through Garner, while Patterson Branch adds 0.54 miles; four street crossings of named streams are mapped. Lake Mineral Wells, a 401 acre lake, is within one mile but outside the community. A proposed creek or lake crossing needs a jurisdiction check during planning.
Who approves a Garner bore in Parker County?
Garner has no city government, so a street bore on Old Garner Road is handled through the county, while work on FM 113 falls under TxDOT. Electric and communication lines crossing FM 113 need at least 60 inches of cover below the lowest point of the crossed grade; water lines need the same crossing cover. The utility owner applies through TxDOT’s online RULIS system, and the TxDOT Fort Worth District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. No rail route is mapped near Garner; a future rail crossing would require an agreement with the railroad that owns the track. Dry Creek crossings are checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve addresses in Parker County near Garner?
EPA drinking water records do not match a water provider to Garner, so the provider for a specific address must be confirmed with Parker County or the local water district before planning a bore. Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri County Electric Cooperative and Wise Electric Cooperative report electric service in Parker County. That does not identify the provider at every Garner address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Parker County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Garner’s median housing year at 1988: 27 percent of homes were built before 1960, 31 percent from 1960 to 1999 and 42 percent in 2000 or later. A bore on Hobson Bend Road might serve a replacement line at an older property or a newer service. We hydrovac pothole marked utilities on the planned path before drilling near them, since surface marks do not show line depth.

How far is Garner from Cool and other nearby places?
Garner is an unincorporated community in Parker County, covering 3.47 square miles at an elevation of 956 feet. ZIP code 76088 serves the area. Cool is 2.5 miles southwest, Mineral Wells is 5.5 miles west, Millsap is 5.5 miles south and Peaster is 6.8 miles east. Weatherford, the county seat, is 13.4 miles east; Mineral Wells is the nearest larger city. From our Yukon yard, Garner is 237 road miles away, about a 5.0 hour drive, which affects how we plan mobilization for work near FM 113.
Places near Garner
- Directional boring in Cool: 2.5 miles southwest
- Directional boring in Mineral Wells: 5.5 miles west
- Directional boring in Millsap: 5.5 miles south
- Directional boring in Peaster: 6.8 miles east
- Directional boring in Weatherford: 13.4 miles east
What boring work comes up near Garner’s Maddux Road?
- Highway crossing: A bore beneath FM 113 keeps the existing pavement uncut and follows the cover and permit plan for the state route.
- Water service: A service along Old Garner Road needs the address specific provider confirmed before we plan its route.
- Fiber route: Maddux Road offers a local corridor for a fiber conduit bore, with marked utilities exposed before drilling near them.
- Creek crossing: A route beneath Dry Creek needs depth planning around the channel and a jurisdiction check during planning.
- Driveway bore: A service near Hobson Bend Road can pass beneath a driveway without opening a trench through its surface.
- Acreage connection: Garner Adell Road can guide a longer service route, with access and footage shaping the bore layout.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Garner Adell Road bore?
For a Garner Adell Road quote, give us the address or map pin, what goes in the ground, pipe or conduit size and footage; a sketch or plans help. Tell us whether the route crosses pavement, a driveway or a creek. That information lets us consider access and bore layout before we discuss the work.
The job details set the price, with Garner’s ground, crossings and travel all affecting the plan. Sandy clay at about 40 inches and mapped weathered bedrock can change drilling time and reaming. A route under FM 113 or across Dry Creek calls for added crossing planning, and pavement may change pit placement. Pipe size, bore length, exposed utilities, pits, excavator time and backfill also matter. Mobilization is part of the scope because Garner is 237 road miles from Yukon.
Questions people ask about boring in Garner
Does Trinity take boring jobs in Garner, Parker County, and who staffs them?
Yes, we take directional boring work in Garner, Parker County, and keep the customer’s contact with Trinity from the first call through the bore log. Our own crews and vetted drilling partners handle work from our Yukon office and partner yards. A route beneath FM 113 can be scoped with the same contact throughout.
Who manages Garner streets like Old Garner Road, and must we cut the pavement?
Garner has no city government, so county streets such as Old Garner Road fall to county authority rather than a city department. Directional boring can place a line beneath pavement without cutting across it. If the route reaches FM 113, TxDOT highway requirements apply instead of a county street process.
What do Garner’s home ages along Hobson Bend Road mean for replacement bores?
Garner’s median housing year is 1988, according to the American Community Survey 2019 to 2023 estimates. Older homes can mean a replacement line, while newer properties may need a new service; the actual buried line must be checked at the address. Near Hobson Bend Road, we pothole marked utilities before drilling close to them.
Can Chaney soil in Garner corrode steel, and what pipe should we use?
The USDA soil survey maps high steel corrosion risk under 69 percent of Garner, so the line owner should weigh casing and tracer wire materials. Chaney loamy sand is the most common mapped soil, but corrosion risk varies by route. HDPE is not subject to the mapped steel corrosion concern; the line owner selects materials and coatings.
What ground does a bore meet in Garner’s Chaney soil?
Chaney loamy sand covers 30 percent of Garner in the USDA soil survey, while sandy clay is mapped under 44 percent at about 40 inches. Fine sandy loam is the leading surface texture. A sandy surface can cave behind the drill, while deeper clay can cling to the reamer, so we plan fluid and reaming for the route.
Is there rock under Garner, and is it hard or weathered?
The USDA soil survey maps bedrock within five feet under 82 percent of Garner, with weathered bedrock mapped across the same share. Hard bedrock is mapped under 1 percent. A bore may therefore meet soft or weathered rock, especially where the ground changes, but site conditions need checking along the actual route.
What bore sizes and lengths can you handle near Garner Adell Road?
We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route on Garner Adell Road still needs its own size, length and ground review. The mapped sandy clay and weathered bedrock can affect the drilling setup.
How much notice does Texas811 need for a bore near Garner’s Maddux Road?
For a bore near Maddux Road, the locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes that as at least two working days. If the start slips more than 14 days, submit a new request; have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore under FM 113 in Garner?
There is no single price for a Garner bore under FM 113; the route and work scope determine the estimate. Length, pipe size, sandy clay or rock, utility crossings, pavement, pits, backfill and excavator time all matter. Creek work near Dry Creek and mobilization from Yukon can also change the job plan.
Where the Garner facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Garner
- U.S. Census Bureau, TIGER/Line 2024: Garner boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Garner population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Garner housing units and year built
- Macrostrat geologic map compilation: map units under Garner
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Parker County
- U.S. Geological Survey, Elevation Point Query Service: Garner elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Garner
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Garner
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Garner, Texas
Type the address of your job in Garner. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Garner
Same county: Willow Park · Aledo · Briar · Springtown · Reno · Annetta · Azle · Hudson Oaks · Fort Worth · Western Lake · Dennis · Cresson. All counties: Texas county list.
