trinityboringsolutions.com

Coyote Acres Texas Directional Boring: Opelika Soil, FM 1554 And Lattas Creek

Quick Answer: Carroll Loop is the longest named street, and FM 1554 and FM 625 run through Coyote Acres. We use directional boring, also called horizontal directional drilling (HDD), to place utilities beneath those roads. The mapped community has 19.18 miles of public road centerline, and our Yukon, Oklahoma main office is 595 road miles away. Opelika soil is common here, so sticky clay can build on a reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Coyote Acres bores at a glance

  • Unincorporated community in Jim Wells County, Texas. Population 570 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 595 miles, about 11.6 hours of driving.
  • Ground: Opelika soil is mapped on 27 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1554 and FM 625. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Carroll Loop in Coyote Acres?

Carroll Loop is the longest named street at 1.23 miles, followed by the Coyote Acres street at 0.75 miles. Public records map 19.18 miles of public road centerline inside the community, with FM 1554 and FM 625 crossing it. Coyote Acres is in Jim Wells County, with a 2020 Census count of 570. We bore water, sewer, gas, electric conduit and fiber beneath these routes where plans and clearances allow.

Our main office is in Yukon, Oklahoma, and Coyote Acres work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught our family business, started in 1965, to plan for the fine sandy loam and clay mapped near FM 1554 instead of assuming the route will drill uniformly.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Opelika soil like to bore in Coyote Acres?

The USDA soil survey maps Opelika across 27% of Coyote Acres, with Lattas at 15%, Papalote at 11% and Delfina at 10%. Fine sandy loam is the most common surface texture, mapped across 59% of the community. At about 40 inches below the surface, sandy clay loam accounts for 61% of the mapped texture, while clay accounts for 25%; average clay content at that depth is 34%. These are mapped soil patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Coyote Acres mapped community boundaryWhat is mapped
Soil series mappedOpelika 27 percent, Lattas 15 percent, Papalote 11 percent, Delfina 10 percent and Banquete 8 percent
Texture at the surfacefine sandy loam 59 percent, clay 25 percent and sandy clay loam 7 percent
Texture about 40 inches downsandy clay loam 61 percent, clay 25 percent and cemented material 6 percent
Engineering class about 40 inches downlean clay (CL) 50 percent, fat clay (CH) 30 percent and clayey sand (SC) 11 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches28 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel46 percent of the area

The soil survey does not map bedrock in the top five feet of Coyote Acres, though that cannot rule out deeper rock. Seasonal water tables are mapped within 40 inches in 28% of the area, so pits may need pumping. In Coyote Acres, we have no mapped flood prone soils to guide a directional boring route. High steel corrosion risk covers 46%, a reason for the line owner to consider casing and tracer wire materials. The Lissie Formation, of Pleistocene age, includes sand, silt and clay; Chibanian Alluvium also maps here, with mixed sand, silt and clay that can include cemented material.

How do we drill Coyote Acres sandy clay loam?

In Coyote Acres, the survey maps sandy clay loam below the surface and clay in some areas. We adjust fluid and reaming to the ground on the route, then track the drill head as the bore advances near FM 1554 or Carroll Loop.

  1. With clay mapped in Coyote Acres, we use a thinner drilling fluid and ream in stages so sticky soil is less likely to load the tool or grip the pipe.
  2. At routes near the mapped seasonal water table, including a Carroll Loop job, we keep pits compact and pump water if needed.
  3. Before drilling near FM 1554, we hydrovac expose every marked utility along the bore path; the marks show position, not depth.
  4. For a Coyote Acres bore near the unnamed drainage, we track the drill head from the surface and log its depth and pitch as it advances.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What might a bore cross in Coyote Acres near CPKC (Kansas City Southern)?

FM 1554 runs 3.3 mapped roadway miles inside the Coyote Acres boundary, while FM 625 runs 1.5 miles. Texas State Highway 359 and Texas State Highway 44 are each 0.6 miles outside the boundary; US 281 and the US 281 Bypass are each 0.7 miles away. Carroll Loop is the longest named street at 1.23 miles, with the Coyote Acres street at 0.75 miles and Granjeno Road at 0.54 miles. Those roads help define possible routes and access for entry and exit pits.

CrossingTypeMapped extentWho has a say
FM 1554State highway3.3 roadway miles insideState highway office
FM 625State highway1.5 roadway miles insideState highway office
Texas State Highway 359Highway nearby0.6 miles outsideState highway office
Texas State Highway 44Highway nearby0.6 miles outsideState highway office
US 281Highway nearby0.7 miles outsideState highway office
US 281 BypassHighway nearby0.7 miles outsideState highway office
CPKC (Kansas City Southern)Railroad nearby0.6 miles outsideThe railroad
Lattas CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
San Andreas CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
San Diego CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Coyote Acres boundary. CPKC (Kansas City Southern) track lies 0.6 miles outside it, and no mapped street and rail crossings are inside the community. Lattas Creek and San Andreas Creek are each 0.1 miles outside the boundary; San Diego Creek is 0.7 miles away. No named stream crossing is mapped inside the community, though 1.75 miles of unnamed drainage are mapped there. Around Coyote Acres, we have no mapped lakes or ponds within one mile to account for when planning a bore.

Who approves a Coyote Acres bore in Jim Wells County?

Coyote Acres has no city government, so a street bore is handled by the county or the state agency responsible for that route. For FM 1554, FM 625 or another state highway, electric and communication lines need at least 60 inches of cover at a crossing and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. The utility owner applies through TxDOT RULIS, and the TxDOT Corpus Christi District reviews the permit. A CPKC track crossing needs the railroad’s agreement, while a Lattas Creek route is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Coyote Acres, Jim Wells County?

Before we plan directional boring at a specific Coyote Acres address, we confirm the water provider with the county or local water district. EPA drinking water records do not tie systems to towns here, so a provider cannot be matched to the community by name. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report service in Jim Wells County; we confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Jim Wells CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Coyote Acres at 1996; 21% of homes were built before 1960, 31% from 1960 to 1999 and 48% in 2000 or later. A replacement route near Granjeno Road may meet older services, while a newer FM 1554 address may need a new connection. We hydrovac expose marked utilities on the route before drilling near them, including lines whose depth cannot be read from surface marks.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Coyote Acres from Alice Acres and our Yukon office?

Coyote Acres is an unincorporated census designated place in Jim Wells County, at an elevation of 229 feet and covering 5.13 square miles. ZIP code 78332 serves the community. Alice Acres is 1.6 miles east, Rancho Alegre is 2.7 miles northeast, and Ben Bolt is 4.0 miles southeast. Alice, the county seat and nearest larger city, is 5.1 miles northeast. The Yukon yard is 595 road miles away, a drive of 11.6 hours, which affects how we plan mobilization for a Carroll Loop or FM 1554 job.

Places near Coyote Acres

What would we bore near Lattas Creek in Coyote Acres?

  • Highway crossing: A bore beneath FM 1554 keeps the road surface uncut, with the route and cover planned for the state right of way.
  • Street service: A water or sewer connection along Carroll Loop can run beneath the road rather than through an open cut.
  • Fiber drop: A conduit route near the Coyote Acres street can connect a service while avoiding pavement cuts where the plan allows.
  • Creek crossing: A proposed route near Lattas Creek needs depth planning and a check for federal water jurisdiction.
  • Rail crossing: A route near CPKC track needs the railroad’s agreement before a bore can cross the line.
  • Drainage bore: The 1.75 miles of unnamed drainage mapped in Coyote Acres can affect pit placement and the bore profile.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Coyote Acres bore near FM 1554?

For a Coyote Acres quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help us understand the route. Near FM 1554, note any creek, drainage or pavement crossing and where equipment can reach the proposed pits, since those details shape the plan.

The job scope sets the price through ground, crossings and logistics. Opelika soil and the clay mapped below the surface affect reaming and fluid needs; a route crossing FM 1554 or CPKC track adds crossing planning. Length, line size, exposed utilities, pavement, creek or drainage crossings, pit work and excavator time also matter. With Coyote Acres 595 road miles from Yukon, mobilization is another part of the estimate, especially for high profile or emergency work.

Questions people ask about boring in Coyote Acres

Does Trinity Boring Solutions take directional boring jobs in Coyote Acres, Jim Wells County?

Yes. We take directional boring work in Coyote Acres and across Texas, with Trinity managing the job from the first call through the bore log. Our own crews and vetted partner drilling contractors work from the arrangements described for the area, not from a local office. A route along Carroll Loop or FM 1554 starts with the site details and planned line.

What does a Coyote Acres bore under CPKC (Kansas City Southern) track require?

A crossing of CPKC (Kansas City Southern) track needs an agreement from the railroad that owns it. The track is mapped 0.6 miles outside the Coyote Acres boundary, and no street and rail crossing is mapped inside the community. The railroad sets crossing conditions such as casing, depth and flagging, so the route and agreement must be coordinated before work.

Can a line be bored under Lattas Creek near Coyote Acres?

A bore may be planned beneath Lattas Creek if the route, depth and site conditions allow. The creek is mapped 0.1 miles outside the Coyote Acres boundary, and a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We would review the proposed crossing and access before choosing a bore profile.

Who owns electric lines in Coyote Acres, Jim Wells County, and who confirms conduit specs?

AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County, but that does not identify the provider for every address in Coyote Acres. The utility that owns the line confirms the conduit specifications for the specific route. We verify that owner before planning a bore near FM 625 or another road.

Who is in charge of Granjeno Road in Coyote Acres, and must it be cut?

Coyote Acres is unincorporated and has no city government, so approvals for Granjeno Road depend on whether the route is under county or state authority. Directional boring can place a line beneath a road without cutting its surface. For a state highway such as FM 1554, TxDOT requires boring or tunneling beneath existing pavement.

How old are homes and buried lines along Coyote Acres street in the Coyote Acres community?

The American Community Survey 2019 to 2023 estimates give Coyote Acres a median housing year of 1996, with 21% of homes built before 1960. That age can make replacement service routes different from new connections, but it does not establish the age or depth of buried lines. We expose marked utilities near the proposed bore before drilling close to them.

How far is Coyote Acres from Alice and Trinity’s Yukon, Oklahoma main office?

Alice is 5.1 miles northeast of Coyote Acres, while Trinity’s Yukon main office is 595 road miles away, an 11.6 hour drive. That distance can affect mobilization planning for work on FM 1554 or Carroll Loop. We review access, scope and equipment needs when estimating a job in Jim Wells County.

How much notice does Texas811 need for a Coyote Acres bore near Carroll Loop?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays, and do not request a locate more than 14 days before work. Texas811 describes this as at least two working days. If a Carroll Loop start slips more than 14 days past the original notice, submit a new request; marks that wear off or move must be refreshed through Texas811 before work continues.

Near FM 1554, what site specific factors affect directional boring costs in Coyote Acres?

The scope drives the estimate, not just the route length. Opelika soil and clay affect drilling conditions, while FM 1554 pavement, creek or drainage crossings, and marked utilities can add planning and field work. Pipe size, pits, excavator time, sand backfill, emergency timing and mobilization from Yukon also matter. We assess those details for the specific Coyote Acres route.

Where the Coyote Acres facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Coyote Acres

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Coyote Acres, Texas

Type the address of your job in Coyote Acres. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Coyote Acres

Same county: Premont · Orange Grove · San Diego · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch · Alfred. All counties: Texas county list.