K-Bar Ranch Texas Directional Boring: Lattas Clay, FM 738 and Quinta Creek
Quick Answer: FM 738 is one of the main routes a utility bore may need to cross, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in K-Bar Ranch, Texas. K-Bar Ranch is 576 road miles from our Yukon, Oklahoma main office, with Prairie Lane among the mapped community streets. Lattas clay and clay heavy ground can grip the pipe and build up on the reamer. We plan the fluid and reaming sequence around that ground and Quinta Creek crossings.
K-Bar Ranch bores at a glance
- Unincorporated community in Jim Wells County, Texas. Population 375 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 576 miles, about 11.4 hours of driving.
- Ground: Lattas soil is mapped on 44 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 738, Texas State Highway 359 and FM 534. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Quinta Creek and Sandy Hollow Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near FM 738 in K-Bar Ranch?
We take directional boring work in K-Bar Ranch, an unincorporated community in Jim Wells County with no city government. The Census Bureau counted 375 residents in its 2020 Census count; it does not publish yearly estimates for unincorporated places. Along FM 738, Texas State Highway 359, FM 534 and Prairie Lane, we install water, sewer, gas, electric conduit and fiber lines by bore where the route and access allow.
Our main office is in Yukon, Oklahoma, and K-Bar Ranch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. A typical K-Bar Ranch job near FM 738 is much shorter, with the route, utility crossings and Lattas clay setting the plan.

What does Lattas soil mean for boring in K-Bar Ranch?
The USDA soil survey maps Lattas soil across 44 percent of K-Bar Ranch, including Lattas clay on 0 to 1 percent slopes and 1 to 3 percent slopes. At about 40 inches below the surface, clay is mapped across 45 percent of the area and average clay content is 36 percent. Sandy clay loam is also common at that depth. These are mapped soil patterns, not test borings, so a site check still matters. The clay can hold the bore open, but it can also stick to the reamer and grip the pipe.
| USDA soil survey, inside the K-Bar Ranch mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Lattas 44 percent, Pernitas 14 percent, Clareville 12 percent, Racombes 9 percent and Czar 7 percent |
| Texture at the surface | clay 45 percent, sandy clay loam 27 percent and fine sandy loam 15 percent |
| Texture about 40 inches down | clay 45 percent, sandy clay loam 38 percent and clay loam 12 percent |
| Engineering class about 40 inches down | fat clay (CH) 56 percent and lean clay (CL) 38 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 51 percent of the area |
With Lattas among K-Bar Ranch’s mapped soil series, we plan bores knowing bedrock is not mapped in the top five feet, though deeper rock remains possible. Seasonal water table conditions are mapped within 60 inches across 4 percent of the area, while flood prone soils are not mapped. In Jim Wells County, mapped high steel corrosion risk covers 51 percent of K-Bar Ranch, so we consider casing and tracer wire materials for planned bores. The geologic map shows Beaumont Formation, areas predominantly sand, from the Pleistocene, and Delta Silt And Clay from the Late Pleistocene. Clay may need controlled fluid returns; sand can cave behind the bit.
How do crews bore through clay in K-Bar Ranch?
Lattas clay and the mapped clay share call for a controlled bore, not a rushed pull. We expose marked lines, track the drill head and adjust the fluid and reaming plan to the route near FM 738 or Quinta Creek.
- On a Lattas clay route, we use thinner drilling fluid with polymer and ream in stages so sticky clay is less likely to load up the reamer.
- Where K-Bar Ranch ground has heavy clay, we watch the fluid returns closely and keep pressure controlled near pavement on FM 738.
- Before the final ream near Prairie Lane, we have the pipe ready so the open hole spends less time exposed to the mapped sand and clay.
- At Quinta Creek or Sandy Hollow Creek, we plan the path below the channel and check the drill head depth and pitch as the bore advances.

What is in the way of a new line near Quinta Creek in K-Bar Ranch?
FM 738 has 2.9 mapped roadway miles inside the K-Bar Ranch community boundary. Texas State Highway 359 has 2.2 miles, and FM 534 has 2.1 miles. A route along or across any of those highways needs room for the bore path and entry and exit pits. Prairie Lane is the longest named street in the mapped community, with 0.16 mile inside it. Boring can keep a street surface intact, but the route still has to clear buried utilities and pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 738 | State highway | 2.9 roadway miles inside | State highway office |
| Texas State Highway 359 | State highway | 2.2 roadway miles inside | State highway office |
| FM 534 | State highway | 2.1 roadway miles inside | State highway office |
| Quinta Creek | Stream | 0.87 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sandy Hollow Creek | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hobbs Hollow | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Charquitas Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Javelin Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Corpus Christi | Lake or pond | 1,403 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the K-Bar Ranch community boundary or within 1 mile outside it, so a rail crossing is not part of the mapped route picture. Quinta Creek has 0.87 channel mile inside the community, and Sandy Hollow Creek has 0.31 mile. Three mapped street crossings cross named streams. Lake Corpus Christi, a 1,403 acre lake, is within 1 mile but outside the boundary. A creek or lake route needs a jurisdiction check during planning.
Who approves a highway bore in Jim Wells County near K-Bar Ranch?
K-Bar Ranch has no city government, so Prairie Lane and other local streets are not city streets; the county or state is responsible according to the road. FM 738, FM 534 and Texas State Highway 359 are state highways, so a utility bore in their right of way needs a TxDOT utility permit reviewed by the TxDOT Corpus Christi District. The utility owner files through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. For Texas State Highway 359 crossings, we follow TxDOT requirements to bore or tunnel beneath existing pavement and coordinate with the TxDOT Corpus Christi District. A Quinta Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Jim Wells County near K-Bar Ranch?
Before planning a bore near Prairie Lane in K-Bar Ranch, we confirm the address’s water provider with Jim Wells County or the local water district. The records do not identify a provider for this place, so we do not assume one serves every address. Utilities reporting electric service in Jim Wells County include AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative. We confirm the line owner for the route before planning an electric conduit bore near FM 738 or Prairie Lane.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The 2019 to 2023 five year estimates put K-Bar Ranch’s median housing year at 1987, prompting us to verify underground utilities before boring. The estimates place 11 percent of housing units before 1960, 48 percent from 1960 to 1999, and 41 percent in 2000 or later. A bore near older homes may serve a replacement, while newer construction can call for a new service. Before drilling near marked lines along FM 738 or Prairie Lane, we pothole them to check their depth.

How far is K-Bar Ranch from Sandia and our Yukon yard?
K-Bar Ranch is in Jim Wells County at an elevation of 189 feet, and the mapped community covers 3.37 square miles. Its ZIP code is 78372. Orange Grove is 2.6 miles south, Sandia is 4.1 miles northeast, and Westdale is 4.5 miles southwest. Alice, the county seat and nearest larger city, is 18.5 miles southwest. The Yukon, Oklahoma main office is 576 road miles away, an 11.4 hour drive. That distance is part of the mobilization plan for a bore near FM 738 or Quinta Creek.
Places near K-Bar Ranch
- Directional boring in Orange Grove: 2.6 miles south
- Directional boring in Sandia: 4.1 miles northeast
- Directional boring in Westdale: 4.5 miles southwest
- Directional boring in Lake City: 6.8 miles northeast
- Directional boring in South La Paloma: 7 miles south
- Directional boring in Alice: 18.5 miles southwest
Which jobs call for a bore near Prairie Lane in K-Bar Ranch?
- Highway crossing: A bore beneath FM 738 or Texas State Highway 359 needs a planned route under the pavement and room for pits outside the travel lanes.
- Water service: A new or replacement service near Prairie Lane starts with confirming the address water provider and locating buried lines along the route.
- Fiber conduit: A conduit route alongside FM 534 needs its line owner confirmed and marked utilities exposed before drilling near them.
- Creek crossing: A route beneath Quinta Creek needs channel depth planning and a jurisdiction check before the bore path is set.
- Electric conduit: Near FM 738, we confirm which utility owns the line before setting conduit size and planning a crossing.
- Street bore: A Prairie Lane bore can pass below the street surface, with entry and exit pits placed in the dirt.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near FM 738 in K-Bar Ranch?
For a route near FM 738 or Quinta Creek, start with an address or map pin so we can place the work. Tell us whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans help show Prairie Lane access, nearby utilities and the crossing points.
The price follows the route and work involved. Lattas clay can affect reaming and fluid control; a crossing at FM 738 adds highway planning, and a Quinta Creek route adds crossing review. Pipe size, bore length, utilities to expose, pavement, pits and excavator time also matter. K-Bar Ranch is 576 road miles from Yukon, so mobilization is part of the scope. High profile or emergency work can also change what the job requires.
Questions people ask about boring in K-Bar Ranch
Does Trinity take directional boring jobs in Jim Wells County at K-Bar Ranch?
Yes. We take directional boring work in K-Bar Ranch and staff it with our own crews or crews from vetted partner drilling contractors. You coordinate with Trinity from the first call through the bore log, whichever crew is on site. That arrangement applies to routes near FM 738, Prairie Lane and Quinta Creek.
Will a K-Bar Ranch bore hit rock near Lattas soil?
The soil mapping does not show bedrock in the top five feet, but that does not rule out rock deeper down. The geologic map includes Beaumont Formation, areas predominantly sand, and Delta Silt And Clay. Those mapped units help frame planning near Lattas soil, but they are not a site specific test of the bore path.
Who approves a K-Bar Ranch bore under FM 738?
TxDOT reviews a utility permit for work in the FM 738 right of way through its Corpus Christi District. The utility that owns the line files in TxDOT’s online RULIS system, and we prepare the bore plan and profile for the owner. That process also applies to Texas State Highway 359 and FM 534.
Can a K-Bar Ranch line go under Quinta Creek?
A bore can be planned under Quinta Creek, but the route and crossing conditions need review first. The creek has 0.87 channel mile inside the mapped community. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the bore path is planned to pass below the channel.
Who owns electric lines in Jim Wells County for a K-Bar Ranch conduit bore?
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. That does not identify the owner for every K-Bar Ranch address. We confirm the line owner for the specific route before planning conduit near FM 738 or Prairie Lane, and the owner confirms the conduit requirements.
Does Jim Wells County or a city control K-Bar Ranch streets, and must Prairie Lane be cut?
K-Bar Ranch is unincorporated and has no city government, so street responsibility rests with the county or state according to the road. Prairie Lane is a named local street, and a directional bore can pass beneath it without cutting the surface. Pits and utility exposure still have to fit the route.
Can I reach Trinity after hours for an urgent bore in Jim Wells County near K-Bar Ranch?
Yes. Call (405) 409-7423; a person answers 24 hours a day. We provide emergency response, including for a time sensitive job near FM 738 or Quinta Creek in Jim Wells County. The route, utility and access still determine what work can be done.
How much notice does Texas811 need for a K-Bar Ranch bore near Prairie Lane?
Paint near Prairie Lane shows a utility’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks need refreshing through Texas811.
What affects the cost of a K-Bar Ranch bore under FM 738?
The price depends on the route and scope, not one standard rate. Lattas clay, pipe size, footage, pavement at FM 738, utilities that need exposure, pits and any Quinta Creek crossing all affect the work. Mobilization from the Yukon office also matters because K-Bar Ranch is 576 road miles away.
Where the K-Bar Ranch facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside K-Bar Ranch
- U.S. Census Bureau, TIGER/Line 2024: K-Bar Ranch boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: K-Bar Ranch population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: K-Bar Ranch housing units and year built
- Macrostrat geologic map compilation: map units under K-Bar Ranch
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: K-Bar Ranch elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to K-Bar Ranch
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in K-Bar Ranch
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in K-Bar Ranch, Texas
Type the address of your job in K-Bar Ranch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for K-Bar Ranch
Same county: Premont · Rancho Alegre · San Diego · Coyote Acres · Alice Acres · Amargosa · Loma Linda East · Owl Ranch · Alfred · Ben Bolt. All counties: Texas county list.
