trinityboringsolutions.com

Waka Texas Directional Boring: Sherm Clay Loam, Texas State Highway 15, Blackwater Draw

Quick Answer: On Butler Avenue, Rogers Avenue and Texas State Highway 15, we do directional boring in Waka, Texas, also called horizontal directional drilling (HDD), within 3.67 public road miles inside the mapped community. Our Yukon, Oklahoma main office is 226 road miles from Waka, where Texas State Highway 15 runs through the community. The USDA soil survey maps Sherm clay loam across Waka; its heavy clay can cling to the reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Waka bores at a glance

  • Unincorporated community in Ochiltree County, Texas. Population 50 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 226 miles, about 5 hours of driving.
  • Ground: Sherm soil is mapped on 100 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 15. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Waka along Texas State Highway 15?

Trinity Boring Solutions handles directional boring in Waka, Ochiltree County, where the 2020 Census count was 50 people. Butler Avenue, Rogers Avenue and Texas State Highway 15 give a bore route its local street and highway context across 3.67 public road miles inside the mapped community. We install water, sewer, gas, electric conduit and fiber beneath or along those routes, as the project needs.

Our main office is in Yukon, Oklahoma, and Waka work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record of no utility strike in over 25 years matters on Waka routes, where Southwestern Public Service and North Plains Electric Cooperative report electric service in Ochiltree County. Our family business began in 1965, and we have done directional boring since 1982, including work across Texas.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Waka ground like to bore in Sherm soil?

Sherm soil is the mapped ground across Waka, and it calls for a plan that accounts for sticky clay. The USDA soil survey maps Sherm clay loam, with clay loam texture both at the surface and about 40 inches down. It maps 35% clay at that depth and identifies the mapped area as heavy clay, not sandy or gravelly ground. These are soil survey patterns, not test borings, so the actual bore path still needs to be judged in the field.

USDA soil survey, inside the Waka mapped community boundaryWhat is mapped
Soil series mappedSherm 100 percent
Texture at the surfaceclay loam 100 percent
Texture about 40 inches downclay loam 100 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA map for Waka does not show bedrock within the top five feet, but that does not rule out deeper rock. Seasonal water table and flood prone soils are not mapped here, which is useful for planning pits, though site conditions still matter. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. The Blackwater Draw Formation is Cenozoic and includes sand, silt and locally clayey material; the map also identifies Paleocene Cenozoic sedimentary rocks.

How do we bore Waka’s clay loam?

We plan a Waka bore for Sherm clay loam by controlling fluid and clearing the route before drilling. Texas State Highway 15 and the local streets call for a path that protects pavement and keeps the hole stable.

  1. Sherm clay loam can ball up on the reamer, so we use thinner drilling fluid with polymer and open the hole in stages along a Waka route.
  2. Because Waka soil maps as heavy clay, we watch fluid returns near Texas State Highway 15 to avoid pressure that could lift pavement.
  3. Before the drill approaches a marked utility on Butler Avenue, we hydrovac pothole it; paint shows location, not depth.
  4. We track the drill head from the surface and log depth and pitch as a bore advances beneath Rogers Avenue.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect bores in Waka near Texas State Highway 15?

Texas State Highway 15 runs through Waka, with 0.8 mapped roadway miles inside the community, so a highway crossing needs a route and permit plan. No other highway is mapped within 1.5 miles outside the boundary. Butler Avenue is the longest named street at 0.67 miles, followed by Rogers Avenue at 0.55 miles and Fuller Street at 0.24 miles. Those streets help define local route options, but the address and proposed line determine where pits and the bore can fit.

No railroad tracks are mapped inside Waka or within one mile outside it, so the mapped street and rail crossing inventory shows no crossing to plan around. No streams are mapped inside or within one mile, and none of the mapped streets crosses a named stream. No lakes or ponds are mapped within one mile. For a route on Butler Avenue or Texas State Highway 15, that leaves the road alignment and buried utilities as the main mapped crossing issues.

Who signs off on a Waka bore in Ochiltree County?

Waka has no city government, so permits for its streets are handled by the county or the state according to the road; Texas State Highway 15 falls to TxDOT. The TxDOT Amarillo District reviews utility work in Ochiltree County. The utility that owns the proposed line submits the highway application through RULIS, while we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT requires boring or tunneling beneath existing highway pavement, and a crossing permit can set the required depth. No railroad or stream crossing is mapped in Waka.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines may be underground in Waka, Ochiltree County?

The water provider for a specific Waka address has to be confirmed with the county or local water district before a bore is planned. Southwestern Public Service and North Plains Electric Cooperative report electric service in Ochiltree County, but that does not identify the electric line owner at every address. We confirm the owner before planning a conduit bore. Near a Waka water route or electric line, hydrovac potholing lets us check marked utilities before the drill approaches them.

Line ownerWhat it isSourceSize
Southwestern Public Service and North Plains Electric CooperativeElectric utilities reporting service in Ochiltree CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing data is not published for a place as small as Waka, so there is no dependable local age profile to tell us which lines may need replacement. A proposed service along Butler Avenue or Rogers Avenue needs a route check rather than an assumption about buried line age. Ochiltree County averages 21.4 inches of precipitation a year, with June averaging 3.2 inches and January 0.6 inches. We expose marked utilities on the bore path before drilling near them.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Waka near Spearman?

We take directional boring work in Waka and across Texas, serving this unincorporated community in western Ochiltree County. Waka covers 0.13 square miles at an elevation of 3,041 feet, and its ZIP code is 79093. Farnsworth is 4.7 miles northeast; Spearman is 10.2 miles southwest. Perryton, the county seat and nearest larger city, is 15.7 miles northeast. Our Yukon, Oklahoma main office is 226 road miles away, a 5.0 hour drive, which can affect mobilization for a Waka project.

Places near Waka

What bores might be needed on Waka’s Rogers Avenue?

  • Highway crossing: A line beneath Texas State Highway 15 needs a planned bore profile and the TxDOT permit process handled by the utility owner.
  • Water service: A Waka service route along Butler Avenue starts with confirming the provider for that specific address before we plan the bore.
  • Fiber route: Fiber conduit following Rogers Avenue can be installed by directional boring when the route and pit locations suit the site.
  • Power conduit: Near Fuller Street, we confirm the electric line owner before planning conduit because county service reports do not identify every address.
  • Replacement line: A water or sewer bore near Main Street needs marked utilities exposed before the drill approaches the existing lines.
  • Urgent work: For an emergency bore near Texas State Highway 15, our 24 hour response starts with details about the route and line.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Waka quote near Butler Avenue?

For a Waka quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage, with a sketch or plans if available. If the route meets Texas State Highway 15 or follows Butler Avenue, show that alignment so we can assess access and crossings.

A short route through Waka’s Sherm clay loam may be simpler to plan than a longer bore with more utilities to expose. Length, pipe or conduit size, soil and rock, utility crossings, pavement, pits and excavator time all affect the work. A Texas State Highway 15 crossing adds permit and profile requirements, while Waka’s 226 road miles from Yukon affects mobilization. Creek crossings, sand backfill and emergency timing can also change the scope.

Questions people ask about boring in Waka

Does Trinity take directional boring work in Waka, Ochiltree County, and how is it staffed?

Yes, we take directional boring work in Waka and across Texas. Our own crews and partner drilling contractors from satellite yards we have vetted handle the work, while you work with Trinity through the project. For a route near Texas State Highway 15, send the location and line details so we can assess the scope.

Who approves a bore under Texas State Highway 15 in Waka?

TxDOT reviews the highway utility permit through its Amarillo District for Waka in Ochiltree County. The utility that owns the line submits the application in RULIS; we prepare the bore plan and profile and work under that owner’s permit. A Texas State Highway 15 crossing beneath existing pavement must use boring or tunneling.

Who owns electric lines in Waka, Ochiltree County, and who confirms conduit requirements?

Southwestern Public Service and North Plains Electric Cooperative report electric service in Ochiltree County, but that does not establish the owner at a particular Waka address. We confirm the line owner before planning conduit, then the owner can confirm the applicable specifications. That check matters before setting a route near Rogers Avenue or another local street.

Who is responsible for Fuller Street in Waka, and does a bore require cutting it?

Waka has no city government, so Fuller Street is under county rather than city responsibility unless a route involves a state road. Directional boring can pass below a street without opening a trench through its surface when the route allows. Texas State Highway 15 has its own TxDOT permit and pavement requirements.

Can you tell how old buried lines are near Rogers Avenue in Waka?

No dependable housing age data is published for Waka, so it cannot establish the age of buried lines near Rogers Avenue. We check the proposed route and expose marked utilities before drilling close to them. That helps plan a replacement bore without assuming what is already underground.

Does Sherm soil in Waka corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across Waka’s Sherm soil. The line owner should consider casing and tracer wire materials; HDPE does not share the steel corrosion concern. The right pipe depends on the line design and the owner’s requirements for the route.

Can I reach Trinity after hours about an urgent bore in Waka near Fuller Street?

Yes, a person answers our phone 24 hours a day, and we provide emergency response. For urgent work near Fuller Street, tell us the address, what line is involved and whether Texas State Highway 15 or another road affects access. Those details help us understand the request.

How much notice does Texas811 need for a bore along Butler Avenue in Waka?

The person coordinating excavation should request locates through Texas811 for the Butler Avenue bore at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of a directional bore under Texas State Highway 15 in Waka?

The route and work scope set the price, including bore length, line size, soil, utilities to expose, pavement, pits and equipment time. A Texas State Highway 15 crossing adds permit and profile considerations, while Waka’s Sherm clay loam affects drilling choices. Mobilization from the Yukon office is also part of planning.

Where the Waka facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Waka

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Waka, Texas

Type the address of your job in Waka. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Waka

All counties: Texas county list.