trinityboringsolutions.com

Westdale Texas Directional Boring: Lattas Clay, FM 624 and Agua Dulce Creek

Quick Answer: Before a bore near FM 624, confirm the water provider for the address; AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report service in Jim Wells County, so line ownership shapes the locate plan. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for crossings along FM 624. Westdale is 582 road miles from our Yukon yard, and Ashton Circle gives a local example of a service route. Lattas clay is common here and can grip the pipe, so we plan reaming and fluid for the ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Westdale bores at a glance

  • Unincorporated community in Jim Wells County, Texas. Population 325 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 582 miles, about 11.4 hours of driving.
  • Ground: Lattas soil is mapped on 38 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 624 and FM 738. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Agua Dulce Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Ashton Circle in Westdale?

Before planning work in Jim Wells County, confirm the water provider for the specific address and the owner of any electric line. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report service in the county, but the owner must be identified before a conduit bore. Trinity Boring Solutions takes directional boring work in Westdale, where the Census Bureau counted 325 residents in 2020. Water, sewer, gas, electric conduit and fiber can be routed beneath Ashton Circle or other local roads.

Our main office is in Yukon, Oklahoma, and Westdale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle 3/4 inch service lines through 48 inch casing, from a small service route near Ashton Circle to a larger casing bore where the plans call for it. Though Westdale is 582 road miles from our Yukon main office, our family business began in 1965 and has done directional boring since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Westdale and Lattas soil?

The USDA soil survey maps Lattas soil across 38 percent of Westdale, and Lattas clay, 0 to 1 percent slopes, covers 34 percent. At about 40 inches, clay is mapped across 43 percent of the area, while sandy ground is not mapped at that depth. The average clay content there is 37 percent. Our map shows Lattas, Goliad, Pernitas, and Clareville soil patterns in Westdale, not test borings. For a bore near FM 624, the clay share points to sticky cuttings and soil that may swell around the pipe, so the actual route still needs to guide the drilling plan.

USDA soil survey, inside the Westdale mapped community boundaryWhat is mapped
Soil series mappedLattas 38 percent, Goliad 19 percent, Pernitas 13 percent, Clareville 12 percent and Parrita 9 percent
Texture at the surfaceclay 43 percent, sandy clay loam 32 percent and loam 12 percent
Texture about 40 inches downclay 43 percent, cemented material 21 percent and sandy clay loam 14 percent
Engineering class about 40 inches downfat clay (CH) 54 percent, silty clay (CL ML) 9 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Bedrock is not mapped in the top five feet, which does not rule out rock deeper down. Seasonal water table is mapped within 60 inches across 1 percent of the area, and flood prone soils are not mapped. High steel corrosion risk covers 58 percent, so the line owner should consider casing and tracer wire materials. The geologic map includes Beaumont Formation, areas predominantly sand, of Pleistocene age, and Late Pleistocene Delta Silt And Clay. That mix means we plan for changing soil rather than assuming one cut across a route near Agua Dulce Creek.

How do we bore Westdale clay without losing control?

Lattas clay and the mapped sand and silt units call for a plan that follows the route, not a single ground assumption. Near FM 624, we control fluid and reaming while tracking the drill head.

  1. With clay mapped across 43 percent of Westdale at about 40 inches, we use drilling fluid and staged reaming suited to sticky soil that can cling to the pipe.
  2. Where the route meets the mapped sand units near FM 624, we manage the bore to keep loose ground supported and have the pipe ready for pullback.
  3. At a paved crossing on FM 624, we watch fluid pressure so the ground does not lift pavement, while tracking depth and pitch from the surface.
  4. Before a bore near Chris Lane, we hydrovac pothole marked utilities on the path; a locator mark shows position, not the line’s depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Westdale bore cross near FM 624?

FM 624 runs through Westdale, with 5.0 mapped roadway miles inside the community boundary; FM 738 adds 0.8 miles. A bore beneath either state road needs a plan for the right of way and the pavement. Ashton Circle is the longest named local street at 0.35 miles, followed by Chris Lane at 0.31 miles. Public road centerlines total 15.71 miles, though the public record names only those two streets. Boring can keep a route beneath pavement intact, with entry and exit pits set in dirt.

CrossingTypeMapped extentWho has a say
FM 624State highway5 roadway miles insideState highway office
FM 738State highway0.8 roadway miles insideState highway office
Agua Dulce CreekStream1.16 channel miles insideChecked for Corps of Engineers jurisdiction
Quinta CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside or within 1 mile outside the Westdale boundary, so the mapped features show no track route to plan around. Agua Dulce Creek runs 1.16 channel miles inside the community, and two mapped street crossings of named streams are recorded. Quinta Creek is 0.4 miles outside the boundary. Within 1 mile of Westdale, our map shows no lakes or ponds, while Agua Dulce Creek is a separate stream feature. A creek route needs its depth planned beneath the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Whose permission does a Westdale bore need in Jim Wells County?

Westdale is an unincorporated community with no city government, so a street permit is handled by the county or the state according to the road. FM 624 and FM 738 are state highways: work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Corpus Christi District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that owner’s application and work under its permit. For a route near Agua Dulce Creek, planning checks for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped near the community.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Jim Wells County near Westdale?

Public records do not identify a water provider for a specific Westdale address. Confirm that provider with the county or local water district before planning a bore near Ashton Circle. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County, but those records do not identify the electric owner at every address. Confirm the line owner before planning an electric conduit route near FM 624.

Line ownerWhat it isSourceSize
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Jim Wells CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We consider Westdale’s median housing year of 1999, from the American Community Survey 2019 to 2023 five year estimates, alongside its clay surface soil when planning underground work. The survey estimates that 54 percent of housing units were built from 1960 to 1999 and 46 percent in 2000 or later. A replacement line near Chris Lane may have a different route and depth from a new service. Before drilling near a marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Westdale from Alice and our Yukon yard?

Westdale is in Jim Wells County, at an elevation of 208 feet, and covers 4.03 square miles. ZIP code 78372 serves the area. Orange Grove is 3.4 miles east, K-Bar Ranch is 4.5 miles northeast, and South La Paloma is 4.9 miles south. Alice, the county seat and nearest larger city, is 15.2 miles south. Our Yukon yard is 582 road miles away, a drive of 11.4 hours. That distance is part of planning mobilization for work near FM 624 or Agua Dulce Creek.

Places near Westdale

Which jobs call for a bore near Agua Dulce Creek in Westdale?

  • Highway crossing: A bore under FM 624 needs a route planned for the state highway right of way and its pavement.
  • Local service: A water or sewer service near Ashton Circle can run beneath the street instead of cutting across its surface.
  • Fiber conduit: A conduit route near Chris Lane can connect a service while keeping the paved street uncut.
  • Creek crossing: A bore beneath Agua Dulce Creek needs depth planning under the channel and a jurisdiction check during planning.
  • Road crossing: A route beneath FM 738 needs coordination with the state highway permit process for work in the right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Ashton Circle in Westdale?

Start with the address or map pin, such as a point near Ashton Circle or FM 624. Tell us what line is going in, such as water or fiber, then give the pipe or conduit size and the footage. A sketch or plans help show where the route meets a road, driveway or Agua Dulce Creek.

The route and job conditions shape the price. Ground matters: Lattas clay can grip pipe, while the mapped sand units can need extra attention to keep the hole open. Crossings matter too, including pavement on FM 624 and a possible route near Agua Dulce Creek. We also consider pipe size, bore length, utilities to expose, pits, excavator time, backfill and concrete. Westdale’s 582 road miles from Yukon affect mobilization, and emergency or high profile work can add planning demands.

Questions people ask about boring in Westdale

Does Trinity take directional boring jobs in Westdale, Jim Wells County, and who staffs them?

Yes. Trinity takes directional boring work in Westdale, and our own crews or crews from partner drilling contractors we have vetted can staff the work. For work near Ashton Circle, we work with you from the first call through the bore log, keeping Westdale site details in view. For a route near FM 624, the crew and plan follow the job scope and the road conditions.

Who approves a bore under FM 624 in Westdale, and which state office reviews it?

TxDOT reviews work in the FM 624 right of way through its Corpus Christi District. The utility owner submits the application in TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. The permit sets the route conditions, so the utility owner must obtain it before the work proceeds.

Can a line be bored beneath Agua Dulce Creek in Westdale?

A bore can be planned beneath Agua Dulce Creek, which runs 1.16 channel miles inside the community. The route needs to stay under the channel, and planning checks whether the crossing is under U.S. Army Corps of Engineers jurisdiction. The exact alignment and ground conditions determine the drilling plan.

Who owns electric lines in Westdale, Jim Wells County, and who confirms conduit requirements?

AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County, but that does not identify the owner at every Westdale address. Confirm the specific line owner before setting conduit details for a route near Ashton Circle or FM 624.

Who is in charge of Chris Lane in Westdale, and does a bore require cutting it?

Westdale has no city government, so Chris Lane is not a city street; the county or state handles street permissions depending on the road. A directional bore can pass beneath the street without an open cut. Pits sit in dirt on either side of the route.

How old are the buried lines near Chris Lane in Westdale, and can replacements be bored?

The American Community Survey 2019 to 2023 estimates give Westdale a median housing year of 1999, but that does not date individual buried lines. A replacement near Chris Lane can be bored if the route and utilities allow it. We expose marked lines by hydrovac before drilling close to them.

How far is Westdale from Alice and Trinity’s Yukon, Oklahoma main office, and does distance matter?

Westdale is 582 road miles and an 11.4 hour drive from our Yukon yard. Alice is 15.2 miles south and is the county seat. The Yukon distance affects mobilization planning for work near FM 624, along with the bore length, equipment and site access.

How much notice does Texas811 need for a bore near Ashton Circle in Westdale?

For a bore near Ashton Circle, send a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Westdale work in Jim Wells County, we make a new request if the start slips more than 14 days past the original notice. Worn or moved marks need refreshing before work continues.

What affects our directional boring cost near FM 624 in Westdale, including the crossing plan and permit coordination with TxDOT Corpus Christi District?

The scope drives the price: bore length and pipe size, Lattas clay, marked utilities to expose, pits and pavement all matter. A crossing under FM 624 may add highway planning, while a route near Agua Dulce Creek brings its own crossing considerations. Westdale’s 582 road miles from Yukon also affect mobilization.

Where the Westdale facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Westdale

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Westdale, Texas

Type the address of your job in Westdale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Westdale

Same county: Premont · Rancho Alegre · San Diego · Coyote Acres · Alice Acres · Sandia · Amargosa · Loma Linda East · Ben Bolt. All counties: Texas county list.