trinityboringsolutions.com

Scenic Oaks Texas Directional Boring: Eckrant Cobbly Clay, Interstate 10 and Balcones Creek

Quick Answer: Need a line beneath Interstate 10 without cutting pavement? We use directional boring, also called horizontal directional drilling (HDD), to put utilities below the roadway in Scenic Oaks, Texas. Our Yukon, Oklahoma main office is 490 road miles away, so a Balcones Creek crossing or another site feature matters to mobilization. Eckrant cobbly clay and shallow bedrock are common mapped conditions; rock can slow the bore and calls for careful steering.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Scenic Oaks bores at a glance

  • Unincorporated community in Bexar County, Texas. Population 10,458 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 490 miles, about 9.5 hours of driving.
  • Ground: Eckrant soil is mapped on 24 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 80 percent of the area.
  • Highways inside the boundary: Interstate 10 and US 87. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Balcones Creek and Leon Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can bore a utility line under Interstate 10 in Scenic Oaks?

Need a line beneath Interstate 10 without cutting the pavement? We take directional boring jobs in Scenic Oaks, Bexar County, for water, sewer, gas, electric conduit and fiber lines. The Census Bureau counted 10,458 people here in the 2020 Census. We can plan a service line along Windwood Drive or conduit near Boerne Stage Road around the actual route and marked utilities.

Our main office is in Yukon, Oklahoma, and Scenic Oaks work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our directional boring experience dates to 1982, and our family business began in 1965; we plan around Scenic Oaks’ gravelly clay loam. Our range, from 3/4 inch service lines to 48 inch casing, can suit a Windwood Drive service or a larger crossing near Interstate 10.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Scenic Oaks soil like around Eckrant?

The USDA soil survey maps Eckrant soil across 24% of Scenic Oaks, with Brackett at 23% and Crawford at 22%. Eckrant cobbly clay is a mapped soil unit, while gravelly clay loam covers 23% of the mapped area at the surface. At about 40 inches, the survey maps bedrock under 80% of the area and reports an average clay content of 39%. Eckrant soil survey patterns in Scenic Oaks are not test borings, so we confirm ground conditions before planning a bore. Clay can cling to a reamer, so staged reaming and a fluid mix suited to the ground can help keep the hole workable.

USDA soil survey, inside the Scenic Oaks mapped community boundaryWhat is mapped
Soil series mappedEckrant 24 percent, Brackett 23 percent, Crawford 22 percent, Anhalt 12 percent and Krum 8 percent
Texture at the surfacegravelly clay loam 23 percent, stony clay 22 percent and clay 21 percent
Texture about 40 inches downbedrock 80 percent, clay 9 percent and silty clay 6 percent
Engineering class about 40 inches downfat clay (CH) 15 percent and silty gravel (GM) 3 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches80 percent of the area (46 percent hard rock, 35 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel77 percent of the area

The USDA soil survey maps bedrock within 60 inches across 80% of Scenic Oaks; hard bedrock is mapped across 46% and weathered bedrock across 35%. That makes rock conditions a route specific concern, not a uniform assumption. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 1% of the area. High steel corrosion risk is mapped across 77%, so the line owner should consider casing and tracer wire materials. The local geologic unit is the Glen Rose Formation, Albian in age, with limestone, dolostone and marl that can require slower drilling or rock tooling.

How do we bore Scenic Oaks ground with shallow bedrock?

Eckrant cobbly clay and bedrock mapped near the surface call for a bore plan based on the route, not a guess from the surface. At Balcones Creek, channel conditions also shape the crossing plan.

  1. Eckrant cobbly clay can stick to the reamer, so we can use thinner fluid and staged reaming, then pull the line soon after opening the hole.
  2. With bedrock mapped within 40 inches across 80% of Scenic Oaks, the crew checks the route as it advances and changes to rock tooling if hard rock calls for it.
  3. Before drilling near a marked utility on Windwood Drive, we expose it with hydrovac; paint indicates position at the surface, not the line’s depth.
  4. At Balcones Creek, the bore plan accounts for the channel and checks for possible Army Corps jurisdiction before the crossing is designed.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might we bore across Balcones Creek in Scenic Oaks?

Interstate 10 and US 87 each have 7.8 mapped roadway miles inside the Scenic Oaks community boundary. A utility crossing beneath either highway needs a route and depth plan that fits the state right of way. Boerne Stage Road is the longest named street, with 6.4 miles in the community; Windwood Drive has 2.02 miles and Fox Briar Lane has 1.87 miles. For a bore beneath Fox Briar Lane, we expose marked utilities with hydrovac before the drill gets near them, since surface marks do not show depth.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate7.8 roadway miles insideState highway office
US 87US highway7.8 roadway miles insideState highway office
Balcones CreekStream4.43 channel miles insideChecked for Corps of Engineers jurisdiction
Leon CreekStream1.91 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Scenic Oaks community boundary or within one mile outside it, and no street and rail crossings are mapped. Balcones Creek runs 4.43 channel miles here and Leon Creek runs 1.91 miles; six street crossings of named streams are mapped. A Balcones Creek route needs creek conditions checked during planning, including possible federal jurisdiction. No lakes or ponds are mapped within one mile, though unnamed drainage channels run through the community.

Who approves Scenic Oaks work in Bexar County?

Scenic Oaks is an unincorporated community, so it has no city government; work on local streets is handled through the county, while Interstate 10 and US 87 are state highways. A bore in TxDOT right of way needs a utility permit reviewed by the TxDOT San Antonio District. The utility owner, not our contractor, files through RULIS, and we prepare the bore plan and profile for that application. TxDOT rules set cover depths by line type and crossing, with the district able to require a different depth. A Balcones Creek crossing is checked for Army Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Bexar County near Scenic Oaks?

The water provider for a specific Scenic Oaks address has to be confirmed with the city, the county or the local water district before a bore is planned; available EPA records do not identify a provider for this place. We check Bexar County electric service reports for providers including City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. The line owner must be confirmed before we plan a conduit bore along Boerne Stage Road.

Line ownerWhat it isSourceSize
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Scenic Oaks median housing year at 2010; 69% of housing units were built in 2000 or later and 31% from 1960 to 1999. That mix can mean both newer service extensions and replacement work, but housing age does not establish the age or location of a buried line on Windwood Drive. Before drilling near a marked utility, we expose it with hydrovac to verify its position and depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Scenic Oaks and Boerne?

Scenic Oaks is in Bexar County, at an elevation of 1,368 feet, and covers 7.89 square miles. In Scenic Oaks, ZIP codes 78006 and 78255 help identify the area for underground route planning, though we verify each bore location. Fair Oaks Ranch is 3.4 miles northeast, Cross Mountain is 3.8 miles south, and Boerne is 6.7 miles northwest. San Antonio, the county seat, is 18.7 miles southeast. From our Yukon, Oklahoma main office, the drive to Scenic Oaks is 490 road miles and 9.5 hours, which affects mobilization for work near Interstate 10 or Balcones Creek.

Places near Scenic Oaks

What kinds of bores come up on Boerne Stage Road in Scenic Oaks?

  • Highway crossing: A line beneath Interstate 10 needs a planned path through the state right of way and a utility permit from TxDOT.
  • Water service: A service near Windwood Drive needs the address specific water provider confirmed before we set the bore route.
  • Fiber conduit: A route along Boerne Stage Road needs marked utilities exposed where the new conduit passes close to them.
  • Creek crossing: Balcones Creek runs 4.43 channel miles in Scenic Oaks, so a crossing plan accounts for the channel and jurisdiction review.
  • Electric conduit: Near Fox Briar Lane, we confirm the electric line owner and expose marked utilities before drilling nearby.
  • Replacement bore: A route near Highlands Cove can be planned for a replacement line without opening the street along its full length.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Highlands Cove in Scenic Oaks?

For a Highlands Cove quote, tell us the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans can show whether the route reaches a street, drainage channel or existing service. Those details let us assess access and the line path instead of guessing from the street name.

Price depends on the route and work at the site, not just the length. The 490 road miles from Yukon affect mobilization, while Eckrant cobbly clay and shallow bedrock can change drilling time and tooling. A Balcones Creek crossing, marked utilities to expose, pavement, pits, excavator time and backfill also shape the work. High profile or emergency work can add planning demands near Interstate 10.

Questions people ask about boring in Scenic Oaks

Does Trinity take directional boring work in Scenic Oaks, Bexar County?

Yes. We take directional boring work in Scenic Oaks, Bexar County, with our own crews or crews from partner drilling contractors we have vetted. On Boerne Stage Road, we keep you connected from the first call through the bore log, regardless of which crew handles the work. That applies to a service route near Windwood Drive as well as a larger crossing near Interstate 10.

Can you bore a line under Balcones Creek in Scenic Oaks?

A bore under Balcones Creek can be planned, but the route and channel conditions have to be reviewed first. The creek runs 4.43 channel miles in Scenic Oaks, and the crossing is checked for possible Army Corps jurisdiction during planning. We also account for the marked utilities and access at the specific crossing.

Who owns electric lines in Scenic Oaks, Bexar County, and who confirms conduit specs?

The line owner depends on the address; no single electric provider should be assumed for every Scenic Oaks property. Utilities reporting service in Bexar County include City of San Antonio and four electric cooperatives. We confirm the owner near Boerne Stage Road before planning a conduit bore, and the owner confirms the line specifications.

Who is in charge of Fox Briar Lane in Scenic Oaks, and must it be cut?

Scenic Oaks has no city government, so Fox Briar Lane is handled through the county rather than a city street department. A directional bore can pass beneath the street without cutting its surface, subject to the route and approvals for the work. We expose marked utilities along the bore path before drilling near them.

How old are homes and buried lines near Windwood Drive in Scenic Oaks?

The American Community Survey 2019 to 2023 five year estimates give Scenic Oaks a median housing year of 2010; 69% of housing units date from 2000 or later. That does not establish the age of a buried line near Windwood Drive. For replacement work, we locate and expose marked utilities before the drill approaches them.

Does Eckrant soil in Scenic Oaks corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 77% of Scenic Oaks, and Eckrant cobbly clay is a common mapped soil. The line owner decides coatings for steel casing or tracer wire; HDPE is not affected by this soil corrosion concern. A site specific review is still needed to choose materials for the planned line.

Can I reach Trinity after hours about an urgent bore on Fox Briar Lane in Scenic Oaks?

Yes. A person answers our phone, (405) 409-7423, 24 hours a day, including for an urgent bore near Fox Briar Lane. The call lets us discuss the location, access and marked utilities; the schedule and plan depend on the conditions at the Scenic Oaks site.

How much 811 notice does a Scenic Oaks bore near Boerne Stage Road need?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a Boerne Stage Road start slips more than 14 days past the original notice, make a new request. Before boring along Windwood Drive continues, we refresh worn or moved marks through Texas811.

What affects the cost of a Scenic Oaks directional bore under Interstate 10?

The route length, line size, Eckrant soil and shallow bedrock all affect the work, as do utilities to expose, pavement, pits and backfill. A crossing under Interstate 10 has highway permit and planning needs, while a Balcones Creek route adds creek conditions to review. We account for 490 road miles from Yukon for mobilization to Scenic Oaks, which can affect bore scheduling.

Where the Scenic Oaks facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Scenic Oaks

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Scenic Oaks, Texas

Type the address of your job in Scenic Oaks. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Scenic Oaks

Same county: San Antonio · Converse · Universal City · Live Oak · Timberwood Park · Leon Valley · Lackland AFB · Kirby · Selma · Alamo Heights · Schertz · Windcrest. All counties: Texas county list.