Carbon Texas Directional Boring: Chaney Loamy Sand, Texas State Highway 6 and Nash Creek
Quick Answer: Can you get a line under Texas State Highway 6 without cutting it? Yes, we do directional boring, also called horizontal directional drilling (HDD), in Carbon, Texas, for that kind of crossing. Carbon is 273 road miles from our Yukon, Oklahoma main office, and FM 2526 is another route we assess for a bore. The USDA soil survey maps sandy clay at 40 inches across 76 percent of Carbon, so clay can grip the pipe and calls for staged reaming and a same day pull.
Carbon bores at a glance
- Incorporated city in Eastland County, Texas. Population 296 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 273 miles, about 5.9 hours of driving.
- Ground: Chaney soil is mapped on 51 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 51 percent of the area.
- Highways inside the boundary: Texas State Highway 6, FM 2526 and FM 1027. State permit office: TxDOT Brownwood District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Carbon, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Nash Creek in Carbon?
We take directional boring work across Carbon in Eastland County, where the Census Bureau Vintage 2024 estimate puts the population at 296. We install water, sewer, gas, electric conduit and fiber, with routes planned to fit streets such as Main Street and Coke Street. If your line needs to pass beneath a street or driveway, boring can keep the surface intact.
Our main office is in Yukon, Oklahoma, and Carbon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical job near Main Street is shorter and shaped by Carbon soil, access and the line being installed. Carbon is 273 road miles from our Yukon main office; our family business began in 1965 and has done directional boring since 1982.

What does the soil survey show about Chaney soil in Carbon?
The USDA soil survey maps Chaney soil across 51 percent of Carbon, with Chaney loamy sand, 1 to 5 percent slopes mapped across 48 percent. Loamy sand is the leading surface texture, covering 75 percent of the area. About 40 inches below the surface, sandy clay is mapped across 76 percent, and the average clay content at that depth is 38 percent. We use the Chaney, Demona, Patilo, and Hassee mapped soil patterns to inform Carbon bore planning, not as substitutes for test borings. The contrast matters: the surface can cut easily while the deeper clay can cling to the reamer and grip the pipe.
| USDA soil survey, inside the Carbon city limits | What is mapped |
|---|---|
| Soil series mapped | Chaney 51 percent, Demona 24 percent, Patilo 14 percent and Hassee 8 percent |
| Texture at the surface | loamy sand 75 percent, fine sand 16 percent and loam 8 percent |
| Texture about 40 inches down | sandy clay 76 percent, fine sand 14 percent and clay 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 51 percent, fat clay (CH) 32 percent and silty sand (SM) 14 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 51 percent of the area (0 percent hard rock, 51 percent weathered rock) |
| Seasonal water table within 60 inches | 48 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 85 percent of the area |
Weathered bedrock is mapped within 60 inches across 51 percent of Carbon, with typical bedrock depth at 52 inches; hard bedrock is not mapped within that depth range. Seasonal water tables are mapped within 60 inches across 48 percent, so pits may need pumping. Flood prone soils cover 1 percent, including near Nash Creek just outside town. High steel corrosion risk is mapped across 85 percent, so the line owner should select any casing or tracer wire coating; HDPE avoids that soil corrosion concern. The geologic map includes Cenozoic Quartz Sand Decomposition Residuum and Aptian Antlers Sand.
What does it take to bore Carbon’s sandy clay?
Carbon soil changes with depth: loamy sand is common at the surface, while sandy clay dominates around 40 inches down. We plan the bore for both the easy cutting sand and the sticky clay.
- Chaney loamy sand covers much of Carbon’s surface, so we use drilling fluid to help hold the sandy hole open and stage the reaming before pipe is ready to pull.
- Sandy clay is mapped across 76 percent of Carbon at about 40 inches, so we watch returns and keep fluid pressure controlled to reduce the chance of lifting pavement.
- Seasonal water tables are mapped within 40 inches across 34 percent of Carbon, so we size pits with wet conditions in mind and pump them if water collects.
- Near Nash Creek, we plan a route below the channel where needed and check the crossing for Corps jurisdiction; the drill head is tracked and its depth and pitch logged.

Can a Carbon bore cross Texas State Highway 6?
Texas State Highway 6, FM 2526 and FM 1027 are mapped inside Carbon. The state highway has 1.0 mapped roadway miles in town, while each FM route has 0.9. A bore along or beneath one of these routes needs a plan that accounts for the road surface and right of way. Anthracite Street is the longest named local street at 1.25 miles, followed by Main Street at 1.1 and Coke Street at 0.95. Their routes help define access and possible bore paths.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 6 | State highway | 1 roadway miles inside | State highway office |
| FM 2526 | State highway | 0.9 roadway miles inside | State highway office |
| FM 1027 | State highway | 0.9 roadway miles inside | State highway office |
| Nash Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Hunting Shirt Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Carbon or within one mile outside its limits, so no local track crossing is identified in the records. Nash Creek is 0.1 miles from the town limits and Hunting Shirt Creek is 0.4 miles away; neither is mapped inside town. We plan Carbon bore routes with Nash Creek in mind, while no lakes or ponds are mapped within one mile. No street crossings of named streams are mapped inside Carbon, but a project that reaches a creek still needs crossing conditions considered.
Do I need a permit to bore in Eastland County near Carbon?
Because Carbon is incorporated, we coordinate Main Street bore crossings as city streets belonging to the town. Texas State Highway 6, FM 2526 and FM 1027 are state routes; work in their right of way needs a TxDOT utility permit. The TxDOT Brownwood District reviews the filing, and the utility that owns the line submits it through RULIS. For a Texas State Highway 6 crossing in Carbon, we prepare the bore plan and profile for the utility owner and work under its permit. No railroad is mapped within one mile of Carbon, but a railroad crossing would require an agreement with the track owner. A route reaching Nash Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground for the City of Carbon?
The City of Carbon public water system uses purchased surface water and reports 423 service connections serving 999 people. For electric service in Eastland County, public records list AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the specific Carbon address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Carbon | Public water system | Surface water bought from another system | 423 connections, 999 people served |
| AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power, Comanche County Electric Cooperative Association, Taylor Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Eastland County | EIA Form 861 | Confirm the line owner by address |
We treat Carbon’s 1979 median housing year from the American Community Survey 2019 to 2023 five year estimates as context, not a bore alignment input. The estimates show 37 percent of homes built before 1960 and 22 percent built in 2000 or later. A replacement bore near Main Street may follow an older service route, while a new connection may need a different path. Before drilling near marked lines, we hydrovac pothole them to see their depth; paint alone does not show how deep a utility sits.

Where is Carbon in relation to Breckenridge?
Carbon is in Eastland County, at an elevation of 1,600 feet, and covers 1.02 square miles. Its ZIP code is 76435. Eastland, the county seat, is 9.3 miles north; Gorman is 9.8 miles southeast and Cisco is 12.2 miles northwest. Breckenridge is the nearest larger city, 34.1 miles north. From our Yukon, Oklahoma main office, the road distance is 273 miles and the drive is 5.9 hours. That trip is part of planning mobilization for a Carbon job.
Places near Carbon
- Directional boring in Eastland: 9.3 miles north
- Directional boring in Gorman: 9.8 miles southeast
- Directional boring in Cisco: 12.2 miles northwest
- Directional boring in Rising Star: 14.3 miles southwest
- Directional boring in Ranger: 16.5 miles northeast
- Directional boring in Breckenridge: 34.1 miles north
What would we bore near Coke Street in Carbon?
- Highway crossing: A bore beneath Texas State Highway 6 can keep the paved travel lanes intact, with the route set to the permit conditions.
- Water service: A connection near Coke Street can tie into the City of Carbon water system after the existing line owner and path are confirmed.
- Fiber route: Fiber along Anthracite Street can be installed below pavement and driveways without opening a trench through the street.
- Creek crossing: A route toward Nash Creek needs channel conditions considered and a jurisdiction check during planning if the bore crosses the creek.
- Older service replacement: A bore near Main Street can replace a buried line while avoiding an open cut across the street surface.
- Electric conduit: Before a conduit bore near FM 2526, we confirm the line owner and expose marked utilities along the planned path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Anthracite Street in Carbon?
For a Carbon quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us assess the route near Anthracite Street. Tell us if the path crosses pavement, a utility or drainage, so the scope reflects the actual site rather than a map line alone.
In Carbon, soil and rock conditions are the first pricing question: sandy clay at depth can take staged reaming, and weathered bedrock may slow the bore. The number of utilities to expose matters too, especially along older streets such as Main Street. Pavement or a crossing beneath Texas State Highway 6 affects the plan, as can a creek route near Nash Creek. Pit work, sand backfill, equipment time and mobilization from Yukon also shape the job.
Questions people ask about boring in Carbon
Does Trinity Boring Solutions take directional boring jobs in Carbon and Eastland County?
Yes. We take work in Carbon and across Texas, with the job handled by our own crews or a satellite yard run by a drilling contractor we have vetted. You work with Trinity from the first call through the bore log, whether the crew is near Coke Street or another part of Eastland County.
Who is responsible for Coke Street in Carbon, and can you bore without cutting it?
Coke Street is a city street because Carbon is incorporated. Directional boring can take a line beneath the street without an open cut across its surface. We plan the entry and exit pits off the paved route where site access allows, then check marked utilities before the drill approaches them.
How old are homes and buried lines near Main Street in Carbon?
The American Community Survey 2019 to 2023 five year estimates give Carbon a median housing year of 1979, with 37 percent of homes built before 1960. That does not establish the age of a particular buried line. For a replacement bore near Main Street, we locate and expose marked utilities before setting the drill path.
Can groundwater or flooding affect bore pits near Nash Creek in Carbon?
It can affect pit planning. The USDA soil survey maps a seasonal water table within 40 inches across 34 percent of Carbon, so pits may collect water and need pumping. Flood prone soils cover 1 percent, and Nash Creek is 0.1 miles beyond the town limits. A creek crossing gets reviewed for jurisdiction during planning.
Does Chaney soil in Carbon corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 85 percent of Carbon, so the line owner should choose any coating for steel casing or tracer wire. For Carbon bores through loamy sand, we use HDPE because it is not affected by that soil corrosion concern. Chaney loamy sand is mapped across 48 percent of town, but the route and the line design determine the material choice.
What ground does a bore pass through in Chaney soil around Carbon?
The USDA soil survey maps Chaney across 51 percent of Carbon, with loamy sand common at the surface. Around 40 inches down, sandy clay is mapped across 76 percent and average clay content is 38 percent. That deeper material can stick to the reamer and grip the pipe, so staged reaming and a prompt pull may be needed.
What bore sizes and lengths can you handle near Coal Street in Carbon?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Coal Street still depends on the route, soil and utility clearances. Send the footage and pipe or conduit size so we can assess the actual scope.
How much notice does Texas811 need for a bore on Anthracite Street in Carbon?
For an Anthracite Street bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Carbon work through TxDOT Brownwood District, we submit a new request if the start slips more than 14 days past the original notice. On a Carbon route such as Avenue I, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of boring under Texas State Highway 6 in Carbon?
The route and ground set much of the scope. Sandy clay and weathered bedrock can affect drilling time; crossing Texas State Highway 6 adds pavement and permit planning. The number of utilities to expose, pit and backfill work, creek conditions and mobilization from Yukon also matter. We assess those details rather than pricing a Carbon bore by length alone.
Where the Carbon facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Carbon
- U.S. Census Bureau, TIGER/Line 2024: Carbon boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Carbon
- U.S. Census Bureau, American Community Survey 2019 to 2023: Carbon housing units and year built
- Macrostrat geologic map compilation: map units under Carbon
- U.S. EPA Safe Drinking Water Information System: public water systems serving Carbon
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Eastland County
- U.S. Geological Survey, Elevation Point Query Service: Carbon elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Carbon
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Carbon
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Carbon, Texas
Type the address of your job in Carbon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Carbon
All counties: Texas county list.
