trinityboringsolutions.com

Morning Glory Texas Directional Boring: Glendale Soil, Clint Lateral, Union Pacific Tracks

Quick Answer: Can we get your line beneath Texas State Highway 20 or a Union Pacific track without cutting across it? Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Morning Glory, Texas, including crossings along Alameda Avenue. The route is 710 road miles from our Yukon, Oklahoma, main office, and the Union Pacific Valentine Subdivision is one local crossing to plan around. USDA soil maps show silty clay loam at the surface and stratified fine sand to silty clay loam about 40 inches down, so keeping loose sand stable matters.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Morning Glory bores at a glance

  • Unincorporated community in El Paso County, Texas. Population 522 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 710 miles, about 13.3 hours of driving.
  • Ground: Glendale soil is mapped on 49 percent of the area, with stratified fine sand to silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 20. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: Union Pacific.
  • Named streams inside the boundary: Clint Lateral and Mesa Drain.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Alameda Avenue in Morning Glory?

Can we get your line under Alameda Avenue without cutting the road? We take directional boring jobs in Morning Glory, an unincorporated place in El Paso County with 522 people in the 2020 Census count. Along Alameda Avenue, Villalobos Road or Texas State Highway 20, we can bore for water, sewer, gas, electric conduit or fiber instead of trenching across the route.

Our main office is in Yukon, Oklahoma, and Morning Glory work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near Blindweed Street, we offer small service lines from 3/4 inch and large casing bores reaching 48 inch. We are a family business that started in 1965 and have done directional boring since 1982, including work suited to the local roads and tracks.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Glendale soil in Morning Glory?

The USDA soil survey maps Glendale soil across 49% of Morning Glory, with Harkey across 30%. Glendale silty clay and Glendale silty clay loam are among the mapped units. Surface texture is silty clay loam across 56% of the place and silty clay across 34%. At about 40 inches below the surface, the survey maps stratified fine sand to silty clay loam across 48%, silt loam across 27%, and fine sand across 12%. For mapped soil patterns in Morning Glory, we use them as planning context, not as substitutes for test borings. A route near Alameda Avenue can meet different textures along its length.

USDA soil survey, inside the Morning Glory mapped community boundaryWhat is mapped
Soil series mappedGlendale 49 percent, Harkey 30 percent, Anapra 12 percent and Saneli 3 percent
Texture at the surfacesilty clay loam 56 percent, silty clay 34 percent and loam 8 percent
Texture about 40 inches downstratified fine sand to silty clay loam 48 percent, silt loam 27 percent and fine sand 12 percent
Engineering class about 40 inches downsilty sand (SM) 61 percent, silt (ML) 32 percent and sand with silt (SP SM) 3 percent
Average clay content about 40 inches down18 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel66 percent of the area

Bedrock is not mapped within the top five feet in Morning Glory, which does not rule out rock at greater depth. The USDA soil survey maps no seasonal water table within 60 inches and no flood prone soils, but conditions still need checking along Clint Lateral. The geologic map shows Holocene alluvium, including sand, silt, clay and gravel, so soil can vary near channels. High steel corrosion risk is mapped across 66% of the place; the line owner should select any coating for steel casing or tracer wire. For Morning Glory installations, we use HDPE to avoid that soil corrosion concern during underground work.

How do we drill Morning Glory’s stratified fine sand to silty clay loam?

The USDA soil survey shows both cohesive silty clay loam and loose sand near Morning Glory. Along Alameda Avenue or Clint Lateral, we adjust drilling fluid and reaming to the ground actually encountered, rather than treating the mapped pattern as a site test.

  1. Where Morning Glory’s survey maps silty clay loam, we use a thinner drilling mix and staged reaming to limit sticky cuttings and reduce the chance of soil gripping the pipe.
  2. The mapped fine sand near Clint Lateral can fall in behind the drill head, so we build a supportive fluid wall and have the pipe ready before the final ream.
  3. Before a bore near Alameda Avenue reaches a marked utility, we hydrovac pothole it to verify its depth; surface paint alone does not show how deep it sits.
  4. We track the drill head from the surface and log depth and pitch along a Villalobos Road route, adjusting as the ground changes between mapped soil types.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where might a line go under Union Pacific in Morning Glory?

Texas State Highway 20 runs 2.6 mapped roadway miles inside Morning Glory, and Alameda Avenue is the longest named street at 2.61 miles. Villalobos Road runs 0.8 miles inside the community, while Morning Glory Road runs 0.4 miles. A bore beneath the highway or one of these streets can leave pavement intact, with entry and exit pits set in the dirt. There are no mapped highways within 1.5 miles outside the community boundary, so the route and limits matter when deciding which road authority is involved.

CrossingTypeMapped extentWho has a say
Texas State Highway 20State highway2.6 roadway miles insideState highway office
Union PacificRailroad1.62 track miles insideThe railroad
Clint LateralStream2.31 channel miles insideChecked for Corps of Engineers jurisdiction
Mesa DrainStream0.63 channel miles insideChecked for Corps of Engineers jurisdiction
Green LateralStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Salatral LateralStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Middle DrainStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Lake Spur DrainStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.62 track miles inside Morning Glory on its Valentine Subdivision, and Amtrak uses the track. No street and rail crossings are mapped inside the community, but a proposed route still needs review against the actual track location. Clint Lateral runs 2.31 channel miles inside the community and Mesa Drain runs 0.63 miles; four crossings of named streams by mapped streets are recorded. In Morning Glory, we have no lakes or ponds mapped within one mile, so those features do not affect our crossing review. A creek route needs its own ground and access review.

Who handles permits for a Morning Glory bore in El Paso County?

Morning Glory is an unincorporated census designated place, so it has no city government; street permissions belong to the county or state, depending on the road. For a bore in Texas State Highway 20 right of way, TxDOT’s El Paso District reviews the utility permit. The utility that owns the line files through TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that owner. A Union Pacific crossing needs an agreement with the railroad, which sets crossing conditions. A Clint Lateral crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are in the ground in El Paso County near Morning Glory?

The water provider for a specific Morning Glory address has to be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not identify a system for this place. El Paso Electric and Rio Grande Electric Cooperative report electric service in El Paso County, but that does not establish which one serves an address near Alameda Avenue. Before planning an electric conduit bore in Morning Glory, we confirm the line owner.

Line ownerWhat it isSourceSize
El Paso Electric and Rio Grande Electric CooperativeElectric utilities reporting service in El Paso CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

ACS 2019 to 2023 five year estimates place Morning Glory’s median housing year at 1985, so we plan underground work around verified utility locations. It reports 12% built before 1960, 66% from 1960 to 1999, and 22% in 2000 or later. Those figures describe homes, not the age of buried lines along Villalobos Road. A replacement bore or a new service still needs its own route check. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows where a line runs, not how deep it is.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Morning Glory and San Elizario?

Morning Glory is an unincorporated community in El Paso County, at an elevation of 3,628 feet, with 1.07 square miles of land and ZIP code 79836. San Elizario is 3.3 miles west and is the nearest larger place; Clint is 2.1 miles northwest. Fabens is 5.1 miles southeast, Socorro is 5.8 miles northwest, and Agua Dulce is 7.5 miles northeast. The county seat, El Paso, is 23.5 miles northwest. Our Yukon yard is 710 road miles away, a drive of 13.3 hours, which affects mobilization for a Morning Glory bore.

Places near Morning Glory

What boring work comes up around Villalobos Road in Morning Glory?

  • Highway crossing: A bore beneath Texas State Highway 20 can keep the pavement intact, with the plan coordinated through TxDOT’s El Paso District.
  • Water service: A new service near Alameda Avenue needs the provider for that specific Morning Glory address confirmed before we plan its route.
  • Fiber route: Fiber along Villalobos Road can pass below pavement by directional boring, with marked utilities pothole exposed before the drill approaches.
  • Rail crossing: A proposed bore beneath the Union Pacific Valentine Subdivision needs an agreement with the railroad that owns the track.
  • Drain crossing: A line near Clint Lateral needs a route planned for the channel and a check for federal waterway jurisdiction during planning.
  • Electric conduit: Before a conduit bore near Blindweed Street, we confirm which El Paso County electric line owner serves the address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore under Texas State Highway 20 in Morning Glory?

Start with a map pin, because the exact spot on Texas State Highway 20 or Alameda Avenue determines the road authority and nearby crossings. Tell us what will go in the ground, its pipe or conduit size, and the footage. A sketch or plans help us see pits, access and the bore path before we scope the Morning Glory job.

The 710 road miles from Yukon affect mobilization for Morning Glory, then the Glendale and Harkey soil patterns help shape the drilling plan. Price also reflects bore length, pipe or conduit size, and how many utilities must be crossed and exposed. A Union Pacific track or Texas State Highway 20 crossing can add planning and installation requirements. Pavement, creek or drainage crossings, pits, excavator time, sand backfill, emergency timing and the access at the actual address also affect the work.

Questions people ask about boring in Morning Glory

Does Trinity Boring Solutions take directional boring work in El Paso County near Morning Glory?

Yes. We take directional boring work in Morning Glory and elsewhere in Texas. Our main office is in Yukon, and work near Alameda Avenue is handled by our crews or by partner drilling contractors we have vetted. For Morning Glory work, we work with Trinity from the first call through the bore log, whatever crew is assigned.

Do homes and buried lines along Villalobos Road in Morning Glory need replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1985, but that does not date buried lines along Villalobos Road. A bore can serve either a replacement line or a new service. We check the proposed path and pothole marked utilities before drilling near them.

Can Glendale soil in Morning Glory corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 66% of Morning Glory, where Glendale soil is the leading soil series. For Morning Glory bores, we leave any coating for steel casing or tracer wire to the line owner. HDPE does not share that steel corrosion concern, but the suitable pipe depends on the line and its owner.

What ground will a bore meet in Glendale soil near Morning Glory?

The USDA soil survey maps Glendale across 49% of Morning Glory and silty clay loam across 56% at the surface. About 40 inches down, stratified fine sand to silty clay loam is mapped across 48%. Those are mapped patterns, not site test results, so a route near Clint Lateral may encounter changing ground.

Will a bore in Morning Glory hit rock near Clint Lateral?

Bedrock is not mapped in the top five feet of Morning Glory, though that does not rule out rock at greater depth. The geologic map identifies Holocene alluvium with sand, silt, clay and gravel. A bore near Clint Lateral still needs to be planned for the ground found along its actual path.

Who approves a bore under Texas State Highway 20 in Morning Glory?

TxDOT’s El Paso District reviews a utility permit for work in Texas State Highway 20 right of way. The utility that owns the line submits the application through the online RULIS system. We supply the bore plan and profile and work under the permit issued to that owner.

What bore sizes and lengths can Trinity handle near Blindweed Street in Morning Glory?

Our equipment range covers 3/4 inch service lines through 48 inch casing, and bores from 10 feet to 5,000 feet. A job near Blindweed Street is scoped to the line, ground, access and crossings, rather than assuming the full range fits every site.

How much Texas811 notice do I need for a bore along Alameda Avenue in Morning Glory?

For a bore along Alameda Avenue, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days past the original notice, submit a new one. On a Blindweed Street bore, we have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a Morning Glory bore under Texas State Highway 20?

The job’s length and pipe size matter, along with the Glendale and Harkey ground, utilities to cross and expose, and any pavement or drainage work. A Texas State Highway 20 crossing may require added planning. Mobilization from Yukon also factors in, as do pits, equipment time, backfill and emergency or high profile work.

Where the Morning Glory facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Morning Glory

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Morning Glory, Texas

Type the address of your job in Morning Glory. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Morning Glory

Same county: El Paso · Horizon City · Fort Bliss · Homestead Meadows South · Canutillo · Homestead Meadows North · Anthony · Sparks · Westway · Agua Dulce · Vinton · Tornillo. All counties: Texas county list.