Palmview South Texas Directional Boring: Hidalgo Soil, FM 2062 And Edinburg Main Canal
Quick Answer: A bore near Bentsen Palm Drive needs address level confirmation of water and electric line owners. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Palmview South, Texas, including routes beneath FM 2062. Palmview South is 714 road miles from our Yukon, Oklahoma main office, with Border Pacific Railroad 0.5 miles beyond its mapped boundary. USDA maps clay loam under 54 percent of the area at about 40 inches, where sticky cuttings can build on a reamer.
Palmview South bores at a glance
- Unincorporated community in Hidalgo County, Texas. Population 2,008 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 714 miles, about 13.9 hours of driving.
- Ground: Hidalgo soil is mapped on 50 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2062. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Border Pacific Railroad in Palmview South?
Trinity Boring Solutions takes directional boring work in Palmview South, an unincorporated community in Hidalgo County with a 2020 Census count of 2,008; the Census Bureau does not publish yearly estimates for unincorporated places. Along Bentsen Palm Drive or FM 2062, our crews can install water, sewer, gas, electric conduit and fiber, with the route planned around marked utilities and road crossings.
Our main office is in Yukon, Oklahoma, and Palmview South work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside FM 2062, a typical Palmview South job is a shorter service or conduit route planned around mapped clay and existing lines.

What does the USDA soil survey show about Hidalgo soil in Palmview South?
The USDA soil survey maps Hidalgo sandy clay loam across 28 percent of Palmview South and Hidalgo fine sandy loam across 17 percent. Runn silty clay, including saline map units, also appears in the survey. At about 40 inches below the surface, clay loam is mapped under 54 percent of the area, while silty clay accounts for 27 percent and clay for 11 percent. For Palmview South, we use mapped soil patterns as planning context, not as substitutes for test borings. The clay rich profile can hold an open hole, but sticky material may collect on the reamer and grip the pipe.
| USDA soil survey, inside the Palmview South mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Hidalgo 50 percent, Runn 27 percent, Harlingen 11 percent, Brennan 9 percent and Raymondville 4 percent |
| Texture at the surface | fine sandy loam 30 percent, sandy clay loam 28 percent and silty clay 27 percent |
| Texture about 40 inches down | clay loam 54 percent, silty clay 27 percent and clay 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 54 percent, fat clay (CH) 37 percent and clayey sand (SC) 9 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 15 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 42 percent of the area |
Bedrock is not mapped in the top five feet of Palmview South, though the geologic map shows the Beaumont Formation, clay and mud, of Pleistocene age below. For Palmview South crossings, we read that map as showing low permeability deposits, not confirming conditions at the bore. A seasonal water table is mapped within 60 inches across 15 percent of the area, so pits may need pumping. In Palmview South, we do not treat unmapped flood prone soils as proof of site conditions at a crossing. High steel corrosion risk covers 42 percent, a factor for the line owner when selecting casing or tracer wire materials.
How do crews handle clay loam while boring in Palmview South?
Clay loam and silty clay mapped in Palmview South can cling to the reamer and hold the bore open. On routes near FM 2062, we adjust fluid, reaming and pipe timing to the ground we encounter.
- In Hidalgo sandy clay loam and the clay loam mapped at about 40 inches, we use a thinner fluid mix with polymer to limit sticky buildup on the reamer.
- Where Palmview South’s clay holds the bore open, we enlarge the hole in stages and line up the pipe before the final ream.
- Near FM 2062 pavement, we keep fluid pressure controlled and watch returns so pressure does not lift the surface.
- Before drilling near a marked utility on Bentsen Palm Drive, we expose it with hydrovac and track the drill head from the surface.

Which roads, tracks or creeks could a Palmview South bore cross near FM 2062?
FM 2062 is the state highway mapped inside Palmview South, with 0.7 roadway miles inside the community boundary. US 83 and Interstate 2 are each 1.0 mile outside that boundary, and Texas State Highway 364 is 1.3 miles away. Bentsen Palm Drive has 0.72 miles mapped in the community, followed by Watson Road at 0.43 miles and Sotira Street at 0.34 miles. A route along these roads needs to account for pavement, driveways and marked lines without assuming the road owner.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2062 | State highway | 0.7 roadway miles inside | State highway office |
| US 83 | Highway nearby | 1 miles outside | State highway office |
| Interstate 2 | Highway nearby | 1 miles outside | State highway office |
| Texas State Highway 364 | Highway nearby | 1.3 miles outside | State highway office |
| Border Pacific Railroad | Railroad nearby | 0.5 miles outside | The railroad |
| Edinburg Main Canal | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Mission Main Canal | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Palmview South, and no street and rail crossing is mapped there. The Border Pacific Railroad runs 0.5 miles outside the community boundary, so a proposed route reaching its track needs the railroad owner’s crossing agreement. No named stream or lake is mapped inside the community, and no street crossing of a named stream is mapped. Edinburg Main Canal is 0.6 miles outside the boundary; unnamed drainage totals 1.21 miles inside, which can affect route planning.
Who has to sign off on a Palmview South bore in Hidalgo County?
Palmview South has no city government, so streets and permits fall to the county or state rather than a town department. For work in FM 2062 right of way, the utility owner, not the driller, files the TxDOT utility permit through RULIS; the TxDOT Pharr District reviews it. For work in Palmview South, we provide the bore plan and profile needed for that filing. TxDOT rules set highway cover depths by line type, including 60 inches for electric and communication crossings and 60 inches for water crossings. A Border Pacific Railroad crossing needs its owner’s agreement. Planning a canal crossing also includes checking for federal waterway jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Hidalgo County near Palmview South?
EPA drinking water records do not tie systems to towns, so the provider for a specific Palmview South address cannot be matched here. Confirm the water provider with the county or local water district before planning a bore near Bentsen Palm Drive. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but that does not identify the owner at each address. Before a conduit bore, confirm the line owner and have marked lines exposed with hydrovac potholing; paint shows location, not depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Palmview South’s median housing year at 1996; we base underground planning on site conditions. It estimates 61 percent of housing was built from 1960 to 1999 and 39 percent in 2000 or later. That mix can mean work near Bentsen Palm Drive involves either replacement lines or newer service extensions. We expose each marked utility on the bore path before drilling near it, so the crew can work from its actual depth and position.

What is near Palmview South and Abram?
Palmview South is an unincorporated community in Hidalgo County, covering 0.84 square miles at an elevation of 123 feet. Its ZIP code is 78572. Palmview is 1.7 miles north, Abram is 2.1 miles west, and Mission is 3.3 miles east. Edinburg, the county seat, is 15.8 miles northeast. From our Yukon, Oklahoma main office, the road trip is 714 miles and 13.9 hours. That distance is part of planning a crew mobilization for a bore on FM 2062 or Bentsen Palm Drive.
Places near Palmview South
- Directional boring in Palmview: 1.7 miles north
- Abram: 2.1 miles west
- Directional boring in Perezville: 3 miles northwest
- Directional boring in Mission: 3.3 miles east
- Directional boring in Doffing: 4.9 miles north
What boring work comes up near Edinburg Main Canal in Palmview South?
- Highway crossing: A bore beneath FM 2062 needs a route and depth plan that fits the state highway right of way.
- Water service: A connection near Bentsen Palm Drive starts with confirming the address water provider and locating existing lines.
- Fiber route: Along Watson Road, conduit can be bored beneath pavement and driveways rather than opened across the surface.
- Drainage crossing: Near Edinburg Main Canal, the route needs review for crossing conditions and waterway jurisdiction.
- Rail crossing: A route toward Border Pacific Railroad needs the railroad owner’s agreement before planning the track crossing.
- Electric conduit: Near Sotira Street, confirm the line owner and expose marked utilities before the drill approaches.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Bentsen Palm Drive in Palmview South?
For a quote, give us the address or map pin, what will go underground, the pipe or conduit size and the footage. For example, a route near Bentsen Palm Drive needs a clear start and end point, while a crossing of FM 2062 needs its location and plans if available. A sketch helps us see pits, pavement and nearby marked utilities before we scope the work.
The 714 road miles from Yukon affect mobilization, and the clay loam mapped in Palmview South can change drilling and reaming needs. We also account for pipe size and length, utilities to expose, pavement, pit and excavator work, and any drainage crossing. A route beneath FM 2062 or toward Border Pacific Railroad brings crossing details into the plan. Emergency timing or difficult access can add work as well.
Questions people ask about boring in Palmview South
Does Trinity Boring Solutions take directional boring jobs in Palmview South and Hidalgo County?
Yes. We take directional boring work in Palmview South, Hidalgo County, and staff it with our own crews or crews working from partner contractor satellite yards. You work with Trinity from the first call through the bore log, whether the route is near FM 2062 or Bentsen Palm Drive.
Will a Palmview South bore hit rock below the clay loam?
The USDA soil survey does not map bedrock in Palmview South’s top five feet. The geologic map shows the Beaumont Formation, clay and mud, of Pleistocene age. That does not rule out rock deeper down, so a bore near FM 2062 still needs its depth and ground conditions considered.
Who approves a Palmview South bore under FM 2062?
For work in FM 2062 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. We supply the bore plan and profile for the owner’s application. TxDOT rules set minimum cover according to the type of line crossing the highway.
What does a Palmview South bore under Border Pacific Railroad require?
A crossing of Border Pacific Railroad needs an agreement from the railroad that owns the track. The railroad sets crossing conditions such as casing, depth and flagging. Its track is mapped 0.5 miles outside Palmview South’s community boundary, so confirm the proposed route reaches the track before arranging the crossing.
Can a line be bored under Edinburg Main Canal near Palmview South?
A bore may be planned beneath Edinburg Main Canal, which lies 0.6 miles outside Palmview South’s mapped boundary, but the route needs site specific review. During planning in Palmview South, we check whether the crossing falls within US Army Corps of Engineers jurisdiction. Access, depth and ground conditions still shape the design.
Who owns electric lines in Palmview South, Hidalgo County, and who confirms conduit specs?
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but those reports do not identify the owner at every Palmview South address. Confirm the specific line owner and conduit requirements with that owner before planning a bore near Bentsen Palm Drive.
Can I reach Trinity after hours about an urgent bore on Sotira Street in Palmview South?
Yes. A person answers our phone 24 hours a day at (405) 409-7423. For an urgent job near Sotira Street, tell us the location, what line needs work and whether the route approaches FM 2062, so we can understand the immediate scope.
How much notice does Texas811 need before a Palmview South bore near Bentsen Palm Drive?
Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. We build the Texas811 period of at least two working days into Palmview South crossing schedules. If the start slips beyond 14 days, make a new request; refresh worn or moved marks through Texas811 before work continues.
What affects directional boring costs near FM 2062 in Palmview South?
The scope drives the price: bore length and size, Palmview South’s clay loam, pavement and utilities to expose all matter. A crossing beneath FM 2062 or a route toward Border Pacific Railroad adds crossing planning. Pit work, excavator time, drainage conditions, emergency timing and mobilization from Yukon also affect the job.
Where the Palmview South facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Palmview South
- U.S. Census Bureau, TIGER/Line 2024: Palmview South boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Palmview South population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Palmview South housing units and year built
- Macrostrat geologic map compilation: map units under Palmview South
- U.S. Department of Transportation, North American Rail Network: track owners in Hidalgo County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Palmview South elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Palmview South
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Palmview South
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Palmview South, Texas
Type the address of your job in Palmview South. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
