Progreso Texas Directional Boring: Harlingen Clay, US 281 And Unnamed Drainage
Quick Answer: EPA drinking water records do not tie a provider to a specific Progreso address, while AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report service in Hidalgo County; confirm the line owner before a bore near US 281. We take directional boring, also called horizontal directional drilling (HDD), work in Progreso, including bores beneath US 281. Progreso is 719 road miles from our Yukon yard, with Gonzalez Road marking a local route to plan around. The USDA soil survey maps Harlingen clay across 51% of the city, so sticky ground can build on a reamer and grip pipe.
Progreso bores at a glance
- Incorporated city in Hidalgo County, Texas. Population 5,182 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 719 miles, about 14 hours of driving.
- Ground: Harlingen soil is mapped on 51 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281 and FM 1015. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Gonzalez Road in Progreso?
Trinity Boring Solutions takes directional boring work in Progreso, Hidalgo County, where the Census Bureau Vintage 2024 estimate puts the population at 5,182. Along routes such as Gonzalez Road, our crews install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement or driveways instead of opening the surface. We also take work across Texas.
Our main office is in Yukon, Oklahoma, and Progreso work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record of no utility strike in over 25 years matters where water and electric lines may share routes near Gonzalez Road. We are a family business that started in 1965 and have done directional boring since 1982, planning Progreso work from 719 road miles away.

What does Harlingen soil mapping show near Progreso?
The USDA soil survey maps Harlingen soil across 51% of Progreso and Olmito across 25%. Laredo covers 12%, while Cameron covers 8%. At about 40 inches below the surface, the survey maps clay across 52% and silty clay across 25%; the average clay content there is 51%. We treat Harlingen, Olmito, Laredo, and Cameron as mapped soil patterns near Progreso, not test borings for a planned route. For a route near US 281, that much clay means the ground can stick to the reamer, so the crew has to manage the hole and fluid rather than assume it will cut cleanly.
| USDA soil survey, inside the Progreso city limits | What is mapped |
|---|---|
| Soil series mapped | Harlingen 51 percent, Olmito 25 percent, Laredo 12 percent, Cameron 8 percent and Reynosa 3 percent |
| Texture at the surface | clay 52 percent, silty clay 33 percent and silty clay loam 15 percent |
| Texture about 40 inches down | clay 52 percent, silty clay 25 percent and silt loam 20 percent |
| Engineering class about 40 inches down | fat clay (CH) 77 percent and lean clay (CL) 23 percent |
| Average clay content about 40 inches down | 51 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 86 percent of the area |
For Gonzalez Road planning, we see no bedrock mapped in Progreso’s top five feet, though deeper rock remains possible. The USDA survey maps a seasonal water table within 60 inches across 2% of the area and flood prone soils across 1%, so check pit conditions and drainage near the unnamed drainage routes. High steel corrosion risk covers 86%; the line owner should consider casing and tracer wire materials, while Along Mile 3 Road, HDPE is not affected by that soil corrosion concern, so we account for it in material planning. The geologic map shows Holocene muddy flood plain alluvium, mostly mud, which supports planning for fine, sticky ground.
How do crews bore through clay in Progreso?
Harlingen clay and Olmito silty clay shape the drilling plan in Progreso. We adjust fluid and reaming to keep sticky cuttings moving, then track the head so a route can stay on line near streets such as Gonzalez Road.
- Harlingen clay is sticky and can grip the pipe, so we use thinner fluid with polymer, ream in stages and pull the line the day the hole opens.
- Because heavy clay covers much of Progreso, we watch fluid returns near paved streets such as Gonzalez Road to avoid pressure lifting the surface.
- The survey maps a seasonal water table in part of the city, so we keep pits small and pump them if water collects near a route.
- High steel corrosion risk is mapped across Progreso; the line owner selects casing and tracer wire protection, while HDPE avoids that concern.

What does a bore have to cross in Progreso near US 281?
US 281 has 3.6 mapped roadway miles inside Progreso, and FM 1015 has 3.3. A route under either highway has to account for pavement and the right of way, not just the distance between pits. Gonzalez Road is the longest named street at 2.12 miles in the city, followed by Spur 1015 at 1.83 miles and Mile 2 at 1.61 miles. Malone Drive adds another 1.56 miles. A bore can pass beneath these surfaces without cutting them, with the alignment set by the actual route and utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 3.6 roadway miles inside | State highway office |
| FM 1015 | State highway | 3.3 roadway miles inside | State highway office |
| Llano Grande Lake | Lake or pond | 201 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Lion Lake | Lake or pond | 34 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Progreso or within one mile outside its limits, so the mapped street and rail crossing count is none. No named streams or street crossings of named streams are mapped either. The city does have 6.29 miles of unnamed drainage, which can affect where pits and a bore route fit. Llano Grande Lake and Lion Lake are within one mile but outside the city; if a planned line crosses a lake or waterway, check for U.S. Army Corps of Engineers jurisdiction during planning.
Who has to sign off on a Progreso bore in Hidalgo County?
Gonzalez Road and other city streets in incorporated Progreso fall under the city, while work on US 281 or FM 1015 right of way needs a TxDOT utility permit. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade; the along right of way depth is 48 inches. Water needs 60 inches at a crossing and 36 inches along the right of way, while pressurized sewer needs 60 inches at a crossing. The utility owner files through RULIS, and TxDOT’s Pharr District reviews the application. We prepare the bore plan and profile for the owner and work under its permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Hidalgo County near Progreso?
EPA drinking water records do not tie a water provider to a specific Progreso address. Confirm the provider for the route with the city, Hidalgo County or the local water district before planning a bore near US 281. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in the county, but the line owner at a particular address must be confirmed before planning conduit work along Gonzalez Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative | Electric utilities reporting service in Hidalgo County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Progreso’s median housing year at 1993; 16% of homes were built before 1960, 56% from 1960 to 1999 and 28% in 2000 or later. A route near Malone Drive could involve replacement of older pipe or a newer service, so age alone does not identify what is buried. We hydrovac pothole marked utilities on the planned path before drilling nearby; paint shows position, not depth.

How far is Progreso from Progreso Lakes and our Yukon yard?
Progreso is an incorporated city in Hidalgo County, with 3.0 square miles of land at an elevation of 71 feet. For underground work in Progreso, we use its ZIP codes 78579 and 78596 to identify the service area. Progreso Lakes is 1.9 miles south, and Llano Grande is 2.5 miles north; Mercedes, the nearest larger city, is 4.8 miles northeast. County seat Edinburg is 19.6 miles northwest. The Yukon yard is 719 road miles away, a 14.0 hour drive, so mobilization is part of planning for work on Gonzalez Road or US 281.
Places near Progreso
- Progreso Lakes: 1.9 miles south
- Llano Grande: 2.5 miles north
- Relampago: 3.2 miles east
- Villa Verde: 3.4 miles northwest
- Directional boring in Mercedes: 4.8 miles northeast
What would we bore near Mile 2 in Progreso?
- Highway crossing: A bore beneath US 281 has to clear the traveled lanes and meet the cover set for the utility and permit.
- Street service: A water or sewer line near Gonzalez Road can pass under pavement with pits kept in the dirt on each side.
- Conduit route: Confirm the electric line owner before planning a conduit bore along FM 1015 or another Progreso street.
- Drainage crossing: A route near the city’s unnamed drainage needs depth and pit planning; check Corps jurisdiction if the work crosses a waterway.
- Fiber route: A fiber bore near Mile 2 can avoid opening the street, with marked utilities exposed before drilling close to them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Progreso bore near Malone Drive?
For a quote near Malone Drive, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, pits and crossings before we set the scope. The location matters because a route beside US 281 may involve a different crossing plan than a short service along a city street.
Ground conditions, crossings and logistics all shape the price near Malone Drive. Harlingen clay can take careful fluid control and staged reaming; the pipe size and bore length also change the work. A crossing under US 281 brings pavement, cover and permit planning into the scope, while unnamed drainage may affect pit placement. Concrete, exposed utilities, excavator time and backfill add work where needed. Progreso’s 719 road miles from Yukon also affect crew mobilization.
Questions people ask about boring in Progreso
Does Trinity Boring Solutions take directional boring work in Hidalgo County near Progreso?
Yes. We take Progreso work with our own crews and partner drilling contractors vetted by Trinity. You work with Trinity from the first call through the bore log, including on a route near Gonzalez Road. We serve Oklahoma and Texas, and can handle water, sewer, gas, electric conduit or fiber bores.
Can Harlingen soil in Progreso corrode steel, and what pipe should I use?
The USDA survey maps high steel corrosion risk across 86% of Progreso, including areas mapped as Harlingen soil. That matters for steel casing and tracer wire, so the line owner should select suitable protection. Along Mile 3 Road, HDPE is not affected by that soil corrosion concern, so we account for it in material planning. Confirm material specifications with the owner before a bore near US 281.
What ground does a bore go through in Progreso’s Harlingen soil?
The USDA soil survey maps Harlingen soil across 51% of Progreso. At about 40 inches down, clay covers 52% of the area and silty clay covers 25%, with 51% average clay content at that depth. Those are mapped patterns rather than test borings; sticky cuttings can build on the reamer near Gonzalez Road.
Could a Progreso bore near Llano Grande Lake encounter rock?
We see no bedrock mapped in Progreso’s top five feet near Baker Drive, but deeper rock remains possible. The geologic map shows Holocene muddy flood plain alluvium, mostly mud. Near Mile 2, we use Harlingen soil survey mapping as a planning guide, not a description of exact bore depth conditions.
Who approves a bore under US 281 in Progreso, and which state office reviews it?
The utility owner applies for a TxDOT utility permit through RULIS for work in US 281 right of way, and TxDOT’s Pharr District reviews it. We prepare the bore plan and profile for that filing and work under the owner’s permit. Cover depends on the line type and crossing, with the permit able to set a different depth.
Which electric company owns the lines in Hidalgo County near Progreso?
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but that does not identify the owner at every Progreso address. Confirm the specific line owner before planning conduit work near Malone Drive, and check the owner’s conduit specifications for the intended route.
Can I reach Trinity after hours for an urgent bore near Mile 2 in Progreso?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423 for urgent work near Mile 2 or elsewhere in Progreso. Tell us the location and what line is involved so we can understand the immediate scope and the access conditions.
How far ahead should I call Texas811 before boring near Gonzalez Road in Progreso?
Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For a bore near Gonzalez Road, paint shows position rather than depth, so marked utilities on the path need potholing. If marks wear off or move, request refresh through Texas811 before work continues.
How do US 281 access and the TxDOT Pharr District permit affect bore costs in Progreso?
The route, pipe or conduit size, length, Harlingen clay, utility crossings, pavement and pit work all affect the scope under US 281. Drainage may change the plan, and mobilization reflects Progreso’s 719 road miles from the Yukon yard. Share the location and plans so we can assess the actual crossings and access.
Where the Progreso facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Progreso
- U.S. Census Bureau, TIGER/Line 2024: Progreso boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Progreso
- U.S. Census Bureau, American Community Survey 2019 to 2023: Progreso housing units and year built
- Macrostrat geologic map compilation: map units under Progreso
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hidalgo County
- U.S. Geological Survey, Elevation Point Query Service: Progreso elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Progreso
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Progreso
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Progreso, Texas
Type the address of your job in Progreso. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
