Alice Texas Directional Boring: Clareville Soil, US 281 Business and Lattas Creek
Quick Answer: Can we get your line beneath US 281 Business, a CPKC track or Lattas Creek without cutting across it? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Alice, Texas. The Yukon, Oklahoma main office is 591 road miles from Main Street in Alice, so that distance is part of planning the job. Clareville soil is common here, and sticky clay below the surface can cling to the reamer. We plan the bore and fluid use around that ground.
Alice bores at a glance
- County seat of Jim Wells County, Texas. Population 17,595 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 591 miles, about 11.5 hours of driving.
- Ground: Clareville soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281 Business, Texas State Highway 44, Texas State Highway 359, FM 1931 and FM 3376. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), with 25 mapped street and rail crossings.
- Named streams inside the boundary: Lattas Creek, San Diego Creek and Resaca de Enmedio.
- Public water: City of Alice, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can handle directional boring in Alice and Jim Wells County?
Can we put a line beneath a road, track or creek in Alice without cutting across it? Yes. We take directional boring work in Alice and Jim Wells County, where the Census Bureau Vintage 2024 estimate puts the population at 17,595. A water or sewer line could run beneath a street such as Main Street, while fiber or electric conduit may need a route under a highway or track.
Our main office is in Yukon, Oklahoma, and Alice work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Alice planning, our family business began in 1965, and we have done directional boring since 1982, informing how we plan crossings. From a 3/4 inch service line to 48 inch casing, the range can suit a short Main Street connection or a larger route through Alice.

What kind of ground does Alice Clareville soil bring to a bore?
The USDA soil survey maps Clareville soil across 34 percent of Alice. At about 40 inches below the surface, sandy clay loam is mapped across 43 percent of the area, clay loam across 34 percent and clay across 19 percent. The survey also maps heavy clay at that depth across 53 percent. For Alice planning, we treat these as mapped patterns, not test borings, so they do not establish subsurface conditions. Sticky clay can gather on a reamer and grip pipe, so the actual route needs attention to returns and the ground exposed during planning.
| USDA soil survey, inside the Alice city limits | What is mapped |
|---|---|
| Soil series mapped | Clareville 34 percent, Lattas 15 percent, Opelika 12 percent, Pharr 11 percent and Runge 5 percent |
| Texture at the surface | loam 34 percent, fine sandy loam 32 percent and clay 19 percent |
| Texture about 40 inches down | sandy clay loam 43 percent, clay loam 34 percent and clay 19 percent |
| Engineering class about 40 inches down | fat clay (CH) 53 percent, lean clay (CL) 29 percent and clayey sand (SC) 14 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 15 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 31 percent of the area |
Bedrock is not mapped in the top five feet of Alice, which does not rule out deeper rock. Seasonal water table is mapped within 60 inches across 15 percent of the area, so a pit may need pumping. Flood prone soils cover 4 percent, including ground where creek routes deserve care. High steel corrosion risk is mapped across 31 percent, a reason for the line owner to consider casing and tracer wire materials. The USDA map includes Pleistocene Lissie Formation and Late Pleistocene Delta Silt and Clay, whose clay and silt layers can affect drilling and fluid returns.
How do we drill Alice ground with sandy clay loam?
In Alice, the mapped sandy clay loam and heavy clay call for control of fluid and reaming, not a one pass guess. We plan around the route, watch the returns and keep the pipe ready for the pull.
- Clareville soil is mapped across 34 percent of Alice; we adjust fluid and ream in stages when sticky clay gathers on the reamer.
- Heavy clay is mapped at about 40 inches across 53 percent of the area, so we watch returns near pavement to avoid lifting it.
- Seasonal water table is mapped within 60 inches across 15 percent of Alice; small pits and pumping can help manage water at the bore ends.
- Before a bore near Main Street, we expose each marked utility with hydrovac, then track the drill head from the surface and log depth and pitch.

What might a bore cross near US 281 Business in Alice?
US 281 Business runs 4.0 mapped roadway miles inside Alice; Texas State Highway 44, Texas State Highway 359 and FM 1931 also pass through the city. US 281 runs along or touches the city limits, and the US 281 Bypass is 0.1 miles away. Main Street is the longest named street at 3.99 miles, followed by Texas Boulevard at 3.5 miles and Johnson Street at 2.98 miles. A bore can keep pavement and driveways uncut, with pits placed on either side of the route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 Business | US highway | 4 roadway miles inside | State highway office |
| Texas State Highway 44 | State highway | 7.1 roadway miles inside | State highway office |
| Texas State Highway 359 | State highway | 6 roadway miles inside | State highway office |
| FM 1931 | State highway | 2.2 roadway miles inside | State highway office |
| FM 3376 | State highway | 1.2 roadway miles inside | State highway office |
| FM 1352 | State highway | 1.1 roadway miles inside | State highway office |
| FM 665 | State highway | 0.7 roadway miles inside | State highway office |
| FM 1554 | State highway | 0.2 roadway miles inside | State highway office |
| US 281 | Highway nearby | Runs along or touches the city limits | State highway office |
| US 281 Bypass | Highway nearby | 0.1 miles outside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 5.1 track miles inside | The railroad |
| Lattas Creek | Stream | 3.49 channel miles inside | Checked for Corps of Engineers jurisdiction |
| San Diego Creek | Stream | 3.44 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Resaca de Enmedio | Stream | 0.51 channel miles inside | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) line has 5.1 track miles in Alice, and 25 mapped street and rail crossings show how often routes may meet. Lattas Creek runs 3.49 channel miles inside the city, while San Diego Creek runs 3.44 miles. The map records 23 street crossings of named streams. A route near Lake Alice, which covers 384 acres, also needs water crossing conditions considered during planning.
Who approves an Alice bore near CPKC (Kansas City Southern)?
For work on US 281 Business, Texas State Highway 44 or another state highway right of way in Alice, TxDOT reviews the utility permit through its Corpus Christi District. The utility that owns the line files in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. Existing highway pavement is bored or tunneled rather than cut open. Because Alice is incorporated, we account for city ownership of its streets when planning boring crossings. A crossing of the CPKC track needs an agreement with the railroad, and a Lattas Creek crossing is checked for Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Alice water system?
The City of Alice public water system uses surface water and lists 7,905 service connections serving 19,104 people. That network may be close to a proposed bore along Main Street, so the route and marked lines matter before drilling. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. We confirm the line owner for the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Alice | Public water system | Surface water | 7,905 connections, 19,104 people served |
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Alice’s median housing year at 1976, context for underground planning. It estimates 25 percent of homes were built before 1960, 61 percent from 1960 to 1999 and 14 percent in 2000 or later. That mix can mean replacement work as well as new service along streets such as Main Street. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Where does Trinity work near Alice and Rancho Alegre?
Alice is the incorporated county seat of Jim Wells County, covers 11.99 square miles and sits at an elevation of 196 feet. Its ZIP code is 78332. Rancho Alegre is 2.5 miles southwest, Alice Acres is 4.0 miles southwest, and Coyote Acres is 5.1 miles southwest. Ben Bolt is 6.5 miles south. The Yukon, Oklahoma main office is 591 road miles away, an 11.5 hour drive. That distance is considered when scheduling equipment and crews for a bore near US 281 Business.
Places near Alice
- Directional boring in Rancho Alegre: 2.5 miles southwest
- Directional boring in Alice Acres: 4 miles southwest
- Directional boring in Coyote Acres: 5.1 miles southwest
- Directional boring in Ben Bolt: 6.5 miles south
- Directional boring in Loma Linda East: 7.9 miles west
Which Alice jobs call for a bore near Lattas Creek?
- Highway crossing: A route beneath US 281 Business can keep the existing pavement intact, with the bore extending beneath travel lanes as required.
- Rail crossing: A bore beneath the 5.1 miles of CPKC track in Alice needs the railroad’s crossing agreement and its conditions for the work.
- Creek crossing: A line beneath Lattas Creek can avoid cutting the bank; the crossing is checked for Army Corps of Engineers jurisdiction during planning.
- Water service: A connection near the City of Alice water system may need a route beneath Main Street that avoids marked utilities.
- Fiber route: A fiber conduit beneath Texas Boulevard can pass below pavement, with hydrovac potholes used to expose marked lines along the path.
- Drainage crossing: A route near San Diego Creek needs a planned depth below the channel and attention to wet ground at the pits.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of an Alice bore near Main Street?
For a Main Street quote, give us the address or map pin first, then say what will go underground. Tell us the pipe or conduit size and the footage, such as a short water service or a longer fiber route beneath US 281 Business. A sketch or plans help show crossings, access and pit locations before we scope the work.
The route through Alice’s clay is a major factor because sticky ground can build up on the reamer and slow the pull. Price also reflects bore length and pipe size, utilities that must be exposed, pavement or concrete, and crossings such as the CPKC track or Lattas Creek. Pits, excavator time and sand backfill affect the work too. The 591 road miles from Yukon can add mobilization needs, and high profile or emergency work changes planning.
Questions people ask about boring in Alice
Does Trinity take directional boring work in Alice and Jim Wells County?
Yes. We take directional boring work in Alice, and we staff it with our own crews or partner contractor crews from satellite yards we have vetted. The Yukon, Oklahoma office stays the point of contact from the first call through the bore log, including for a route near US 281 Business.
Who approves a bore under US 281 Business in Alice?
TxDOT reviews a utility permit for work in the US 281 Business right of way through its Corpus Christi District. The line owning utility submits the application in the online RULIS system, and we prepare the bore plan and profile. Existing highway pavement is bored or tunneled rather than cut open.
What does a bore under CPKC (Kansas City Southern) in Alice require?
A crossing beneath the CPKC (Kansas City Southern) track needs an agreement from the railroad that owns it. The railroad’s agreement sets crossing details such as casing, depth and flagging. If the route also occupies highway right of way near US 281 Business, TxDOT asks for a copy.
Can a line be bored beneath Lattas Creek in Alice?
A bore beneath Lattas Creek can avoid an open cut across the channel bank. The creek runs 3.49 channel miles inside Alice, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We plan the bore depth to stay below the channel.
Which entity runs Alice’s public water system, and what source supplies it?
The City of Alice owns its public water system and uses surface water, so we account for it in underground crossing planning. The system lists 7,905 service connections and serves 19,104 people. A proposed route near Main Street still needs to be planned around marked water lines and other utilities.
Which electric providers report service in Jim Wells County near Alice?
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. Those records do not establish which provider serves every Alice address. We confirm the line owner for the specific route before planning an electric conduit bore near Texas Boulevard.
How much notice does Texas811 need for a bore near Main Street in Alice?
The excavation party requests locates through Texas811 at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work near Main Street slips more than 14 days past the original notice, make a new request. Before work continues, we refresh worn or moved marks through Texas811, then plan the Alice bore around the updated markings.
How far is Alice from Trinity’s Yukon, Oklahoma main office, and does it matter?
Alice is 591 road miles from the Yukon main office, an 11.5 hour drive. That distance can affect equipment and crew mobilization for a bore near US 281 Business. The route, crossing needs and access in Alice also shape how the job is planned.
What affects the cost of directional boring beneath US 281 Business in Alice?
The cost depends on the specific job. For a US 281 Business crossing, we consider length, pipe size, pavement, marked utilities to expose and any railroad or creek crossings on the route. Alice’s sticky clay can affect reaming, while pits, excavator time, backfill, emergency timing and travel from Yukon also shape the work.
Where the Alice facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alice
- U.S. Census Bureau, TIGER/Line 2024: Alice boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Alice
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alice housing units and year built
- Macrostrat geologic map compilation: map units under Alice
- U.S. EPA Safe Drinking Water Information System: public water systems serving Alice
- U.S. Department of Transportation, North American Rail Network: track owners in Jim Wells County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: Alice elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alice
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alice
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alice, Texas
Type the address of your job in Alice. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alice
Same county: Premont · Orange Grove · San Diego · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch · Alfred. All counties: Texas county list.
