Olmito and Olmito Texas Directional Boring: McAllen Fine Sandy Loam, Sandy Clay Loam, Goliad Formation
Quick Answer: McAllen fine sandy loam is the main ground in Olmito and Olmito, and we do directional boring, also called horizontal directional drilling (HDD), for lines beneath Alicia Street. The Yukon, Oklahoma main office is 734 road miles away, so a bore near Cordo Lobo Street needs mobilization planning. McAllen soil turns to sandy clay loam at about 40 inches. That clay can cling to the reamer and grip pipe, so we plan staged reaming and a prompt pull.
Olmito and Olmito bores at a glance
- Unincorporated community in Starr County, Texas. Population 276 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 734 miles, about 14.4 hours of driving.
- Ground: McAllen soil is mapped on 96 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary or within a mile and a half of it.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on Alicia Street in Olmito and Olmito?
We take directional boring work in Olmito and Olmito, an unincorporated community in Starr County with 276 residents in the 2020 Census count. Along Alicia Street, our crews can bore for water, sewer, gas, electric conduit or fiber, with the route and line size guiding the plan. The mapped community has no city government.
Our main office is in Yukon, Oklahoma, and Olmito and Olmito work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a service line along Deluxe Street, our range runs from 3/4 inch lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

What is McAllen soil like to bore in Olmito and Olmito?
McAllen fine sandy loam is the mapped soil across 96 percent of Olmito and Olmito, according to the USDA soil survey. At about 40 inches below the surface, that soil is mapped as sandy clay loam and as CL in the USCS classification. The survey maps clay texture across the remaining 4 percent at that depth. Average clay content there is 27 percent. These are mapped patterns, not test borings, but they point to ground that can hold a bore open while sticking to the reamer.
| USDA soil survey, inside the Olmito and Olmito mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | McAllen 96 percent and Tiocano 4 percent |
| Texture at the surface | fine sandy loam 96 percent and clay 4 percent |
| Texture about 40 inches down | sandy clay loam 96 percent and clay 4 percent |
| Engineering class about 40 inches down | lean clay (CL) 96 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 4 percent of the area |
Bedrock is not mapped in the top five feet of Olmito and Olmito, but deeper rock is not ruled out. The geologic map shows the Miocene Goliad Formation, with clay, sandstone, marl, caliche and limestone. A seasonal water table is mapped in 4 percent of the area, so pits may need pumping. High steel corrosion risk also covers 4 percent; the line owner should consider casing and tracer wire materials. Flood prone soils are not mapped here.
What does it take to bore sandy clay loam in Olmito and Olmito?
In Olmito and Olmito, the McAllen sandy clay loam calls for controlled fluid and staged reaming. We plan the bore around the sticky clay, the route near Alicia Street and any marked lines.
- On McAllen sandy clay loam near Alicia Street, we tune fluid and ream in stages so sticky cuttings do not build up on the tool.
- Before drilling near a marked line along Cordo Lobo Street, we expose it with hydrovac; paint indicates its position, not its depth.
- We track the drill head from the surface along the planned route and record depth and pitch as the bore advances.
- At a mapped seasonal water table area in Olmito and Olmito, we keep pits manageable and pump water if needed.

Where does a line have to go under Alicia Street in Olmito and Olmito?
A bore beneath Alicia Street can keep pavement intact, while the mapped community has no highways inside it or within 1.5 miles outside its boundary. Alicia Street, Cordo Lobo Street and Deluxe Street are among the longest named local streets, each with about a quarter mile mapped inside the community. Sunset Street is another named route. The public road centerlines total 1.26 miles, so a short crossing still needs a checked route and utility exposure plan.
No railroad is mapped inside Olmito and Olmito or within 1 mile outside it, so no local track crossing is identified. No named streams, lakes or ponds are mapped nearby, and no stream crossing is identified within the community. If a planned route later reaches a railroad, the railroad that owns the track sets the crossing agreement. A creek or other water crossing would be checked for federal jurisdiction during planning.
Who approves a bore in Starr County near Olmito and Olmito?
Olmito and Olmito has no city government, so its local streets are under county authority rather than a city street department. The mapped community has no highway inside or close to its boundary, but a route on an Interstate, US, state, farm to market or ranch to market road right of way needs a TxDOT utility permit. The utility owner files through RULIS for review by the TxDOT Pharr District; we prepare the bore plan and profile for its application. For a TxDOT highway crossing, cover requirements depend on line type and the district permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Starr County near Olmito and Olmito?
The water provider for an Alicia Street address must be confirmed with the county, the local water district or the relevant local authority before a bore is planned. A public water system could not be matched to Olmito and Olmito by town name in EPA records. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County; we confirm the owner of the specific line before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published reliably for a place as small as Olmito and Olmito, so a street address matters more than a townwide estimate. A service line near Cordo Lobo Street may have a longer route from a main than a short frontage connection. September averages 4.5 inches of rain, the wettest month in Starr County, so pit conditions can change. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Do you cover Olmito and Olmito and Rio Grande City?
We take work in Olmito and Olmito, Starr County, and nearby Rio Grande City, 11.5 miles west. The community sits at an elevation of 251 feet and covers 0.03 square miles in ZIP code 78582. El Socio is 0.3 miles east; El Castillo is 0.4 miles southeast; Gutierrez is 0.6 miles east; La Victoria is 0.9 miles northeast; and Eugenio Saenz is 1.4 miles northeast. Rio Grande City is the county seat. Our Yukon yard is 734 road miles away, a 14.4 hour drive, which affects mobilization.
Places near Olmito and Olmito
- El Socio: 0.3 miles east
- El Castillo: 0.4 miles southeast
- Gutierrez: 0.6 miles east
- La Victoria: 0.9 miles northeast
- Eugenio Saenz: 1.4 miles northeast
- Directional boring in Rio Grande City: 11.5 miles west
What kinds of bores come up on Cordo Lobo Street in Olmito and Olmito?
- Water service: A service bore along Deluxe Street can connect a property without opening the full street surface.
- Sewer line: A route near Alicia Street can use pits on either side while leaving the pavement uncut.
- Fiber conduit: A small conduit bore along Cordo Lobo Street can avoid a long open trench through the road corridor.
- Electric conduit: Near Sunset Street, we confirm the line owner and expose marked utilities before the drill approaches them.
- Street crossing: A bore beneath Alicia Street keeps the crossing surface intact, with entry and exit pits placed off the paved route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Sunset Street in Olmito and Olmito?
For a bore near Sunset Street, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help. Those details let us compare the route with the street and locate marks before planning the bore.
The price for a bore near Sunset Street depends on its scope, not just its length. McAllen sandy clay loam may call for staged reaming; pipe size, crossed utilities and any pavement also change the work. A route near a drainage feature, deeper pits or excavator time adds planning. The 734 road miles from Yukon affect mobilization, while emergency timing or a high profile site can require more coordination.
Questions people ask about boring in Olmito and Olmito
Does Trinity take jobs in Olmito and Olmito, Starr County, and who staffs them?
Yes, we take directional boring work in Olmito and Olmito, Starr County. Our own crews and crews from satellite yards run by partner contractors Trinity has vetted can staff the work. You work with Trinity from the first call through the bore log, including a job along Alicia Street.
What ground should I expect for a bore through McAllen soil in Olmito and Olmito?
The USDA soil survey maps McAllen fine sandy loam across 96 percent of Olmito and Olmito. At about 40 inches, the mapped texture is sandy clay loam, with clay mapped in the remaining 4 percent. That clay can cling to the reamer, so staged reaming is a sensible part of planning a bore near Cordo Lobo Street.
Will a bore in Olmito and Olmito hit rock?
Bedrock is not mapped in the top five feet of Olmito and Olmito, but that does not rule out rock deeper down. The geologic map identifies the Miocene Goliad Formation, which includes clay, sandstone, marl, caliche and limestone. A route near Alicia Street still needs planning for the conditions encountered at depth.
Who owns electric lines in Olmito and Olmito, Starr County, and who confirms conduit specs?
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but that does not identify the owner at every Olmito and Olmito address. We confirm the specific line owner before planning a conduit bore near Sunset Street. The line owner should confirm the conduit specifications for that connection.
Who controls Deluxe Street in Olmito and Olmito, and must it be cut for a bore?
Olmito and Olmito is unincorporated, so Deluxe Street is not a city government street. A bore can pass beneath the street with pits set on either side, avoiding an open cut through the surface. The route still needs utility marks and exposures before drilling begins.
Does Trinity cover El Socio and rural sites outside Olmito and Olmito?
Yes, we take work near El Socio, which is 0.3 miles east of Olmito and Olmito, as well as rural sites outside the mapped community. Each address needs its own route and utility review. McAllen soil is common in the community, but the route and ground at a particular site guide the bore plan.
How early should I request Texas811 marks for Alicia Street in Olmito and Olmito?
For a bore near Alicia Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.
How far is Olmito and Olmito from Yukon, and does Rio Grande City change the job?
Olmito and Olmito is 734 road miles and a 14.4 hour drive from the Yukon, Oklahoma main office. Rio Grande City is 11.5 miles west and is the county seat, but it does not change the address specific bore plan. The distance from Yukon can affect crew mobilization for a job near Cordo Lobo Street.
What affects the cost of directional boring on Alicia Street in Olmito and Olmito?
The job scope sets the cost for a bore on Alicia Street. Length, pipe or conduit size, McAllen soil, utility crossings, pavement, pit work and excavator time all affect the plan. A drainage crossing or emergency schedule can add demands, and the 734 road miles from Yukon also affect mobilization.
Where the Olmito and Olmito facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Olmito and Olmito
- U.S. Census Bureau, TIGER/Line 2024: Olmito and Olmito boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Olmito and Olmito population count
- Macrostrat geologic map compilation: map units under Olmito and Olmito
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Olmito and Olmito elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Olmito and Olmito
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Olmito and Olmito
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Olmito and Olmito, Texas
Type the address of your job in Olmito and Olmito. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Olmito and Olmito
Same county: Roma · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.
