Valle Vista Texas Directional Boring: McAllen Fine Sandy Loam, US 83, Border Pacific Railroad
Quick Answer: The water provider for a Valle Vista address must be confirmed before a bore, while AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County; that matters before conduit is planned near US 83. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work under US 83 in Valle Vista, Texas. Our Yukon, Oklahoma main office is 733 road miles from Pete Solis Road. The USDA soil survey maps McAllen fine sandy loam across 79 percent of the community, with sandy clay loam about 40 inches down. That clay bearing ground can cling to a reamer, so staged reaming and a same day pull help keep the hole workable.
Valle Vista bores at a glance
- Unincorporated community in Starr County, Texas. Population 545 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 733 miles, about 14.3 hours of driving.
- Ground: McAllen soil is mapped on 79 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 83. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 83 in Valle Vista?
Trinity Boring Solutions takes directional boring work in Valle Vista, Starr County, including routes near US 83. The Census Bureau counted 545 people here in the 2020 Census. Before planning a line, confirm the water provider for the specific address; electric utilities reporting service in Starr County include AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative. We install water, sewer, gas, electric conduit and fiber, including runs along Pete Solis Road.
Our main office is in Yukon, Oklahoma, and Valle Vista work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982 for work planned in Valle Vista. For Valle Vista routes near US 83, our equipment handles lines from 3/4 inch service lines up to 48 inch casing and bores from 10 feet to 5,000 feet.

What does the soil survey show about Valle Vista and McAllen soil?
The USDA soil survey maps McAllen soil across 79 percent of Valle Vista, so a bore near Pete Solis Road is likely to encounter its fine sandy loam surface. At about 40 inches below the surface, 79 percent of the mapped area is sandy clay loam, classified as CL, with an average clay content of 26 percent. The remaining 21 percent is mapped as Jimenez Quemado association with variable texture at that depth. These are mapped patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Valle Vista mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | McAllen 79 percent and Jimenez 21 percent |
| Texture at the surface | fine sandy loam 79 percent and very gravelly loam 21 percent |
| Texture about 40 inches down | sandy clay loam 79 percent and variable 21 percent |
| Engineering class about 40 inches down | lean clay (CL) 79 percent |
| Average clay content about 40 inches down | 26 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Valle Vista, but that does not rule out deeper rock beneath Benwood Road. The survey also maps no seasonal water table, flood prone soils or high steel corrosion risk in the community. The Goliad Formation, including its Miocene unit, is mapped with clay, sandstone, marl, caliche and other materials. In the mapped CL ground, sticky cuttings can build on a reamer, so thinner fluid, polymer and staged reaming can help; have the pipe ready for a same day pull.
How is a bore run through Valle Vista sandy clay loam?
Near Pete Solis Road, the mapped sandy clay loam can hold a bore open but may cling to the reamer. We plan the fluid, reaming passes and pipe pull around that soil and the marked utilities.
- We check the proposed Pete Solis Road alignment against locate marks first; paint gives position, not depth, so marked utilities need hydrovac exposure before the drill approaches.
- In McAllen soil’s mapped sandy clay loam, we use a fluid mix and staged reaming suited to sticky cuttings, then have the pipe ready for the pull.
- For an approach to US 83 pavement, we track the drill head from the surface with a walkover locator and log depth and pitch as the bore advances.
- We place pits in dirt beside a Redwood Road crossing so the bore can pass under the surface without cutting the roadway.

Where does a line have to go under Pete Solis Road in Valle Vista?
US 83 is the named highway inside the mapped Valle Vista community boundary, with 0.2 roadway miles there and no other highway listed within 1.5 miles outside it. A route may also meet Pete Solis Road, Benwood Road or Redwood Road, the longest named local streets. A bore beneath the roadway can keep pavement and driveways uncut, with work pits placed in dirt on either side. The exact route and the line owner’s plans determine the bore path and required cover.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | US highway | 0.2 roadway miles inside | State highway office |
| Border Pacific Railroad | Railroad nearby | 0.6 miles outside | The railroad |
The Border Pacific Railroad track is 0.6 miles outside the mapped community boundary, and no street and rail crossing is mapped inside Valle Vista. No streams, named channels, lakes or ponds are mapped in or within one mile of the community. That means a local route is not mapped as a creek crossing, though the address and proposed alignment still need review. If a bore route reaches the Border Pacific Railroad, its owner must provide a crossing agreement.
Do I need a permit to bore in Valle Vista or Starr County?
Valle Vista has no city government, so a permit for a local street route is handled by the county, while a US 83 right of way bore needs TxDOT approval. The TxDOT Pharr District reviews the utility owner’s application in the online RULIS system; the utility owner files it, and we prepare the bore plan and profile for its application. TxDOT cover rules set the depth: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches. If the route reaches the Border Pacific Railroad, its owner’s crossing agreement sets the track conditions.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities may have lines in the ground in Valle Vista, Starr County?
For a Valle Vista bore, we confirm the address’s water provider with the county or local water district before planning. Electric utilities reporting service in Starr County are AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative; that county listing does not identify the provider at every address. Before we plan conduit along US 83 or a local street, the line owner must confirm the conduit specifications and route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Valle Vista’s median housing year at 2005; 69 percent of housing units were built in 2000 or later, and 31 percent from 1960 to 1999. That mix can mean either a new service or a replacement line near Benwood Road. Before the drill approaches a marked utility, we hydrovac pothole it to check its actual depth; locate paint shows position, not depth.

How far is Valle Vista from Alto Bonito Heights and our Yukon yard?
Valle Vista is an unincorporated census designated place in Starr County, with no city government, at an elevation of 220 feet. Its mapped area is 0.08 square miles and its ZIP code is 78582. West Alto Bonito is 0.5 miles west, and Alto Bonito Heights is 0.8 miles east. Rio Grande City, the county seat and nearest larger city, is 11.3 miles northwest. From our Yukon, Oklahoma yard, the drive is 733 road miles and 14.3 hours, which affects mobilization for work near US 83.
Places near Valle Vista
- Directional boring in West Alto Bonito: 0.5 miles west
- Directional boring in Alto Bonito Heights: 0.8 miles east
- Villarreal: 0.9 miles southeast
- Zarate: 1.1 miles east
- E. Lopez: 1.2 miles southeast
- Directional boring in Rio Grande City: 11.3 miles northwest
What would we bore near Benwood Road in Valle Vista?
- Highway crossing: A bore beneath US 83 can carry water or conduit below the paved route, with depth and right of way plans set for TxDOT review.
- Street service: A water or sewer line along Pete Solis Road can pass below pavement, with pits placed in the dirt on either side.
- Fiber route: Fiber conduit near Benwood Road can be installed by directional boring, with the route checked against marked lines before drilling.
- Electric conduit: A route near Redwood Road needs the electric line owner to confirm conduit specifications before we plan the bore.
- Rail crossing: If a proposed line reaches the Border Pacific Railroad track 0.6 miles outside the boundary, the railroad owner’s agreement is needed.
- Replacement service: A replacement line near Salvador Zarate Road can use a bore to avoid opening pavement while marked utilities are exposed first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Salvador Zarate Road in Valle Vista?
For a quote near Salvador Zarate Road, send the address or map pin first; the exact spot shows whether the route approaches US 83, a driveway or a marked utility. We need to know what will go in the ground, plus the pipe or conduit size and footage for Valle Vista work. A sketch or plans help us check the proposed alignment and work area.
The price follows the work involved near Salvador Zarate Road, not just the footage. Ground conditions matter: the McAllen soil survey maps sandy clay loam about 40 inches down. Crossings matter too, including US 83 pavement, the Border Pacific Railroad if the route reaches it, and any utilities that need exposure. Pipe size, pits, excavator time, concrete, backfill and emergency timing also affect the scope. Mobilization from our Yukon office reflects the 733 road miles to Valle Vista.
Questions people ask about boring in Valle Vista
Does Trinity Boring Solutions take jobs in Valle Vista, Starr County, and who staffs them?
Yes, we take directional boring work in Valle Vista, Starr County. Our main office is in Yukon, and we handle the job with our own crews or crews from partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near US 83.
What does a Valle Vista bore under the Border Pacific Railroad require?
A bore beneath the Border Pacific Railroad requires an agreement from the railroad that owns the track. Its crossing terms set details such as casing, depth and flagging. The track is 0.6 miles outside the mapped Valle Vista boundary, so the planned alignment determines whether that railroad coordination applies.
Who owns electric lines in Valle Vista, Starr County, and who confirms conduit specs?
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but that does not establish which utility serves a specific Valle Vista address. The line owner must confirm conduit specifications before we plan a bore near US 83 or a local street.
Who handles Redwood Road in Valle Vista, and can a bore avoid cutting it?
Valle Vista is unincorporated, so it has no city government; county or state authority handles the street or highway involved. A bore can pass below Redwood Road with pits in the dirt on either side, avoiding a cut through the pavement when the route and site allow.
What do Valle Vista housing ages near Benwood Road mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year at 2005, with 31 percent of housing units built from 1960 to 1999 and 69 percent in 2000 or later. A Benwood Road project could be a replacement or a new service, so we expose marked utilities before drilling near them.
What ground does a Valle Vista bore meet in McAllen soil?
The USDA soil survey maps McAllen fine sandy loam across 79 percent of Valle Vista, with sandy clay loam at about 40 inches below the surface across 79 percent. That mapped CL soil can make cuttings cling to the reamer, so staged reaming and suitable drilling fluid help manage a route near Pete Solis Road.
Can I reach Trinity after hours about an urgent bore on Redwood Road in Valle Vista?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Redwood Road, have the address or map pin and the line information ready so we can understand the location and scope.
How much notice does Texas811 need for a Valle Vista bore near Pete Solis Road?
Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work near Pete Solis Road slips more than 14 days beyond the original notice, submit a new request. Before work continues in Valle Vista, we have the worn or moved marks refreshed through Texas811.
What affects the cost of a Valle Vista directional bore under US 83?
The price depends on the route and work involved, not on one factor alone. For a US 83 bore, we consider footage, pipe or conduit size, McAllen soil conditions, pavement, utility crossings and any pits or backfill needed. The 733 road miles from our Yukon office also affect mobilization.
Where the Valle Vista facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Valle Vista
- U.S. Census Bureau, TIGER/Line 2024: Valle Vista boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Valle Vista population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Valle Vista housing units and year built
- Macrostrat geologic map compilation: map units under Valle Vista
- U.S. Department of Transportation, North American Rail Network: track owners in Starr County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Valle Vista elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Valle Vista
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Valle Vista
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Valle Vista, Texas
Type the address of your job in Valle Vista. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Valle Vista
Same county: Roma · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · Garza-Salinas II · La Puerta · B and E · Mesquite · El Chaparral · Garceno. All counties: Texas county list.
