Mikes Texas Directional Boring: McAllen Fine Sandy Loam, FM 2360 and Salado Creek
Quick Answer: Where a new line needs to pass beneath FM 2360 in Mikes, we do directional boring, also called horizontal directional drilling (HDD), for water, sewer, gas, electric conduit and fiber. Mikes is 733 road miles from our Yukon, Oklahoma main office, so a bore near Lindas Avenue includes a long mobilization. The USDA soil survey maps McAllen fine sandy loam across 83% of the area. At about 40 inches, sandy clay loam is mapped across 98%, so we plan staged reaming to manage the clay.
Mikes bores at a glance
- Unincorporated community in Starr County, Texas. Population 942 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 733 miles, about 14.3 hours of driving.
- Ground: McAllen soil is mapped on 83 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2360. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along FM 2360 in Mikes?
We take directional boring work in Mikes, an unincorporated community in Starr County with a 2020 Census count of 942 people; the Census Bureau does not publish yearly estimates for unincorporated places. Along streets such as Lindas Avenue, we can install water, sewer, gas, electric conduit and fiber where a route needs to pass under pavement or a driveway.
Our main office is in Yukon, Oklahoma, and Mikes work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical Mikes job near FM 2360 is much shorter, with the route, soil and marked utilities shaping the plan.

What kind of ground does Mikes have around McAllen soil?
The USDA soil survey maps McAllen soil across 83% of Mikes and Ramadero across 15%. McAllen fine sandy loam covers 83% of the mapped area, while Ramadero loam covers 15%. Our McAllen and Ramadero soil series maps show mapped patterns, not test borings along Mikes 1st Street. At about 40 inches below the surface, sandy clay loam is mapped across 98% of the area, with average clay content of 27%. That CL soil can hold an open hole, but clay may stick to the reamer or grip pipe, so we plan the fluid and reaming sequence for the actual route.
| USDA soil survey, inside the Mikes mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | McAllen 83 percent and Ramadero 15 percent |
| Texture at the surface | fine sandy loam 83 percent and loam 15 percent |
| Texture about 40 inches down | sandy clay loam 98 percent |
| Engineering class about 40 inches down | lean clay (CL) 98 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Bedrock is not mapped in the top five feet of Mikes, which does not rule out deeper rock. The USDA survey maps no seasonal water table within 60 inches, but flood prone soils cover 15% of the area, so drainage routes still matter. Along FM 2360 in Mikes, we do not map high steel corrosion risk. The Goliad Formation, undivided, is Cenozoic and includes clay, sand, sandstone, marl, caliche, limestone and conglomerate; the Miocene Goliad Formation also includes those materials. A route near Salado Creek needs site specific planning rather than assumptions from the map.
How do we drill Mikes sandy clay loam?
For Mikes sandy clay loam, we tailor the fluid and reaming plan to the clay mapped below the surface. The McAllen soil pattern guides planning, but the route and actual ground conditions determine the final setup.
- We use a fluid plan suited to the sandy clay loam mapped at about 40 inches in Mikes, then ream in stages to manage clay buildup.
- With the McAllen soil pattern as a guide, we keep the line ready and pull it after the final ream rather than leave the hole open.
- Before a bore approaches marked utilities along Lindas Avenue, we hydrovac pothole them because surface paint does not show burial depth.
- We track the drill head from the surface and log depth and pitch as a route near FM 2360 advances.

What is in the way of a new line in Mikes near FM 2360?
FM 2360 is the state highway inside Mikes, with 0.4 mapped roadway miles in the community. US 83 lies 0.5 miles outside the mapped community boundary. A line under FM 2360 needs a bore plan that accounts for the highway pavement and right of way. Lindas Avenue is the longest named street at 0.72 miles; Sonya Street and Elias Lopez Street each run 0.7 miles. Those streets give a route designer specific corridors to check for access, pavement and marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2360 | State highway | 0.4 roadway miles inside | State highway office |
| US 83 | Highway nearby | 0.5 miles outside | State highway office |
| Salado Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Mikes or within 1 mile outside the community, and no street and rail crossings are mapped. No named stream runs inside the boundary; Salado Creek is 0.3 miles outside it, while 0.25 miles of unnamed drainage is mapped within the community. No street crossing of a named stream is mapped, and no lakes or ponds are mapped within 1 mile. A proposed Salado Creek crossing still needs planning for channel conditions.
Do I need a permit to bore under FM 2360 in Starr County in Mikes?
Mikes has no city government, so its streets fall to Starr County or the state, depending on who owns the road. FM 2360 is a state highway, and work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Pharr District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application. TxDOT requires boring or tunneling beneath existing highway pavement, with highway crossings encased and rural bores extending under all travel lanes. A Salado Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Starr County near Mikes?
The water provider for a specific Mikes address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie water systems to towns, so the provider cannot be matched to this community. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County. We confirm the line owner for the address before planning an electric conduit bore near FM 2360.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Mikes housing’s median year built at 1992; 73% dates from 1960 to 1999 and 27% from 2000 or later. Those ages can mean a route is replacing older service lines or adding a newer connection, but they do not establish the age of buried utilities. Before drilling near marked utilities along Lindas Avenue, we hydrovac pothole each one on the bore path. For a proposed line under Sonya Street, that means exposing marked lines before the drill approaches.

Do you cover Mikes and nearby La Joya?
Mikes is in Starr County, at an elevation of 208 feet, and its mapped community area is 0.13 square miles. ZIP code 78582 serves the area. Nearby places include Zarate, 0.4 miles northwest, Alto Bonito Heights, 0.5 miles west, E. Lopez, 0.5 miles southwest, La Paloma Ranchettes, 0.7 miles east, and Rivereno, 0.8 miles southwest. La Joya is 10.5 miles east, and county seat Rio Grande City is 12.5 miles west. From our Yukon yard, Mikes is 733 road miles and a 14.3 hour drive, which affects how we plan mobilization for work near FM 2360.
Places near Mikes
- Zarate: 0.4 miles northwest
- Directional boring in Alto Bonito Heights: 0.5 miles west
- E. Lopez: 0.5 miles southwest
- La Paloma Ranchettes: 0.7 miles east
- Rivereno: 0.8 miles southwest
- Directional boring in La Joya: 10.5 miles east
What kinds of bores come up near Lindas Avenue in Mikes?
- Highway crossing: A bore beneath FM 2360 keeps the new utility below the roadway instead of cutting through the state highway pavement.
- Water service: A route along Sonya Street can carry a new service toward an address after the water provider is confirmed.
- Fiber conduit: Lindas Avenue’s 0.72 mile length gives a specific street corridor to check for a fiber route and existing utilities.
- Creek approach: A route near Salado Creek needs channel planning even though the creek is 0.3 miles beyond the mapped community boundary.
- Street replacement: A bore beneath Elias Lopez Street can replace a line without opening the street surface along the planned route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Mikes bore near Salado Creek?
For a Mikes quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Salado Creek or FM 2360 is useful to flag early, since a creek approach and a state highway crossing can change the work plan.
A simple route along Lindas Avenue with clear access and few utility crossings is easier to plan than a constrained crossing at FM 2360. The price depends on length, pipe or conduit size, soil and rock, utilities that need exposure, pavement, drainage crossings, pits, excavator time, backfill and the mobilization from Yukon. McAllen soil and the sandy clay loam mapped below it affect the drilling plan; a Salado Creek approach or work in the FM 2360 right of way adds crossing details to resolve.
Questions people ask about boring in Mikes
Does Trinity Boring Solutions take jobs in Mikes and Starr County, and who staffs them?
Yes, we take directional boring jobs in Mikes and across Texas. The work is done by our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, even if a partner crew is on site near FM 2360.
Who approves a bore under FM 2360 in Mikes?
TxDOT reviews a utility permit for work in the FM 2360 right of way through its Pharr District. The utility owner submits the application in TxDOT’s RULIS system, and we supply the bore plan and profile for it. A proposed crossing near Lindas Avenue still needs its own route and utility checks.
Can a line be bored under Salado Creek near Mikes?
A line may be planned beneath Salado Creek, but the crossing needs site specific review before the route is set. The creek is 0.3 miles outside Mikes’ mapped boundary, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. The soil survey also maps flood prone soils across 15% of Mikes.
Who owns the electric lines in Starr County near Mikes, and who confirms conduit specs?
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report service in Starr County, but that does not identify the owner at every Mikes address. We confirm the line owner for the specific route before planning conduit near FM 2360. The owner can confirm the conduit requirements for its line.
Who is in charge of Elias Lopez Street in Mikes, and must it be cut?
Mikes is an unincorporated community with no city government, so Elias Lopez Street is under county or state authority depending on road ownership. Directional boring can pass beneath the street without cutting its surface. The road owner and route conditions still need to be checked before the work is planned.
Do the homes and buried lines near Sonya Street in Mikes date from the same period?
The housing dates vary, and the age of a home does not tell us the age of its buried line. The American Community Survey 2019 to 2023 five year estimates put the median year built at 1992, with 73% of homes built from 1960 to 1999 and 27% from 2000 or later. We check utilities near Sonya Street before a replacement bore.
How far is Mikes from your Yukon office, and does La Joya change the job?
Our Yukon, Oklahoma main office is 733 road miles from Mikes, so we plan mobilization around that distance. La Joya is 10.5 miles east of Mikes, but it does not change the route conditions at a Mikes address. The distance from Yukon does affect mobilization for a bore near FM 2360.
How much notice does Texas811 need for work on Lindas Avenue in Mikes?
For a bore along Lindas Avenue, submit the locate request to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Mikes permits through the TxDOT Pharr District, we submit a new request if the start slips more than 14 days past the original notice. Marks that wear off or move need refreshing through Texas811 before work continues.
What affects the cost of directional boring under FM 2360 in Mikes?
The job details set the price for a bore under FM 2360. Length, pipe or conduit size, McAllen soil, pavement, the number of utilities to expose, pits, backfill and mobilization from Yukon all affect the work. A route near Salado Creek adds a drainage crossing to assess, while the highway right of way requires permit planning.
Where the Mikes facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mikes
- U.S. Census Bureau, TIGER/Line 2024: Mikes boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Mikes population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mikes housing units and year built
- Macrostrat geologic map compilation: map units under Mikes
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Mikes elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mikes
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mikes
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mikes, Texas
Type the address of your job in Mikes. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mikes
Same county: Rio Grande City · Roma · Las Lomas · Escobares · La Grulla · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.
