Rio Grande City Texas Directional Boring: McAllen Fine Sandy Loam, US 83, Los Olmos Creek
Quick Answer: Can we get a line under US 83, Border Pacific Railroad track or Los Olmos Creek without cutting it? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Rio Grande City, Texas, for crossings like these. The Yukon, Oklahoma main office is 737 road miles away, so Main Street project access affects mobilization. McAllen fine sandy loam and mapped sandy clay loam call for careful fluid control and staged reaming. Pits stay in the dirt beside the crossing.
Rio Grande City bores at a glance
- County seat of Starr County, Texas. Population 15,526 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 737 miles, about 14.3 hours of driving.
- Ground: McAllen soil is mapped on 23 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 8 percent of the area.
- Highways inside the boundary: US 83, FM 3167, FM 755 and Loop 254. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Border Pacific Railroad, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Los Olmos Creek.
- Public water: City of Rio Grande City, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Main Street in Rio Grande City?
Trinity Boring Solutions handles directional boring in Rio Grande City, Starr County, including routes along Main Street, US 83 and FM 3167. Can we bore under a road, track or creek in Rio Grande City without cutting it? Yes, we plan bores for those crossings. The Census Bureau Vintage 2024 estimate puts Rio Grande City at 15,526 people. We install water, sewer, gas, electric conduit and fiber along local streets and across these routes.
Our main office is in Yukon, Oklahoma, and Rio Grande City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record we bring to routes near the City of Rio Grande City water lines and electric facilities reported in Starr County. Our family business started in 1965 and has done directional boring since 1982, including work in Texas.

What kind of ground does a bore meet in Rio Grande City near McAllen soil?
Rio Grande City has a mix of McAllen, Lagloria, Rio Grande, Jimenez and Copita mapped soils, so a bore route can change character across town. The USDA soil survey maps McAllen fine sandy loam across 23 percent of the area. At about 40 inches below the surface, sandy clay loam is mapped under 24 percent, while silt loam accounts for 17 percent. Average clay content at that depth is 23 percent, and sandy ground accounts for 1 percent. These are mapped soil patterns, not test borings, so the exact alignment still matters.
| USDA soil survey, inside the Rio Grande City city limits | What is mapped |
|---|---|
| Soil series mapped | McAllen 23 percent, Lagloria 17 percent, Rio Grande 11 percent, Jimenez 11 percent and Copita 8 percent |
| Texture at the surface | fine sandy loam 30 percent, silt loam 26 percent and silty clay loam 13 percent |
| Texture about 40 inches down | sandy clay loam 24 percent, silt loam 17 percent and variable 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 47 percent, silty clay (CL ML) 17 percent and fat clay (CH) 7 percent |
| Average clay content about 40 inches down | 23 percent |
| Bedrock mapped within 60 inches | 8 percent of the area (0 percent hard rock, 8 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 19 percent of the area |
| High corrosion risk for uncoated steel | 43 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 8 percent of Rio Grande City, and the mapped bedrock is weathered; hard bedrock is not mapped at that depth. A seasonal water table is mapped within 60 inches in 1 percent, while flood prone soils cover 19 percent, a concern to check near Los Olmos Creek. High steel corrosion risk covers 43 percent, so the line owner should consider casing and tracer wire materials. The Catahoula Formation, Frio Formation, and Vicksburg Formation, undivided, are Cenozoic units with mudstone, claystone, sandstone, tuff and clay; variable layers can affect drilling conditions.
How do we drill Rio Grande City ground with sandy clay loam?
We drill Rio Grande City routes through mapped sandy clay loam by managing fluid and opening the hole in stages. Along Los Olmos Creek, we plan for the channel and the mapped flood prone soils before setting the bore path.
- We check the planned Rio Grande City alignment against mapped McAllen fine sandy loam and sandy clay loam, then select fluid and reaming steps for the actual ground.
- Clay can stick to the reamer or grip pipe, so on routes near Main Street we control fluid, ream in stages and plan the pull without leaving the hole open.
- Where silt loam is mapped, we keep fluid pressure low near pavement and slabs; wet silt can soften steering along streets such as 2nd Street.
- Before drilling near a marked line on Charco Blanco Road, we hydrovac pothole it because locate paint shows position but not depth, then track and log the bore.

What could a new line cross in Rio Grande City near Border Pacific Railroad?
Rio Grande City routes can cross US 83, FM 3167, FM 755 or Loop 254, all mapped within city limits, so a crossing plan depends on the exact alignment. Main Street is the longest named street at 6.38 miles in the city. 2nd Street runs 4.96 miles, and Embassy Street runs 2.07 miles. A line along Charco Blanco Road may also have nearby utilities or pavement to work around. Boring can pass under pavement without opening a trench across the roadway.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | US highway | 13.6 roadway miles inside | State highway office |
| FM 3167 | State highway | 8.8 roadway miles inside | State highway office |
| FM 755 | State highway | 3 roadway miles inside | State highway office |
| Loop 254 | State highway | 0.4 roadway miles inside | State highway office |
| Border Pacific Railroad | Railroad | 3.93 track miles inside | The railroad |
| Los Olmos Creek | Stream | 3.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kelsey Lake | Lake or pond | 5 acres, nearby | Checked for Corps of Engineers jurisdiction |
The Border Pacific Railroad has 3.93 track miles in Rio Grande City, and public mapping shows 11 street and rail crossings in the city. A track crossing needs the railroad’s agreement, which sets crossing conditions such as casing, depth and flagging. Los Olmos Creek runs 3.15 channel miles in the city, where three street crossings of named streams are mapped. Kelsey Lake is just outside city limits within one mile, so a route toward it needs site specific review.
Whose permission does a Rio Grande City bore in Starr County need?
For a bore under US 83, FM 3167, FM 755 or Loop 254, the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. The owner submits our bore plan and profile and holds the permit we work under. TxDOT cover rules set the depth: electric and communication lines need 60 inches at crossings, water needs 60 inches, and pressurized sewer needs 60 inches. Existing highway pavement is bored or tunneled, and the rural highway bore extends beneath all travel lanes. Rio Grande City streets belong to the incorporated city. A Border Pacific Railroad crossing also requires its owner’s agreement; a Los Olmos Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near Rio Grande City lines and the City of Rio Grande City?
The City of Rio Grande City public water system uses surface water and reports 7,337 service connections serving 18,912 people. A route near Main Street may encounter water lines, so we expose marked utilities before drilling close to them. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County; we confirm the electric line owner for the address before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Rio Grande City | Public water system | Surface water | 7,337 connections, 18,912 people served |
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
We keep Rio Grande City’s median housing year of 1992 in view when planning underground work; the American Community Survey 2019 to 2023 five year estimates report it. The survey estimates 6 percent of housing was built before 1960, 58 percent from 1960 to 1999, and 36 percent in 2000 or later. That mix can mean replacement work near older Main Street services as well as new connections. Paint shows a marked line’s position, not its depth, so we hydrovac pothole each marked utility on the planned path before the drill approaches it.

How far is Rio Grande City from San Fernando and our Yukon yard?
Rio Grande City is in Starr County, where it is also the county seat, at an elevation of 177 feet. The incorporated city covers 11.35 square miles and uses ZIP code 78582. San Fernando is 1.8 miles northwest, and Fernando Salinas is 1.3 miles northwest. Mission, the nearest larger city listed, is 33.1 miles east. The Yukon yard is 737 road miles away, a 14.3 hour drive. That distance and the route to a site near US 83 shape crew mobilization and equipment planning.
Places near Rio Grande City
- Fernando Salinas: 1.3 miles northwest
- San Fernando: 1.8 miles northwest
- Valle Hermoso: 2.1 miles east
- Airport Heights: 2.1 miles northwest
- El Mesquite: 3.1 miles east
- Directional boring in Mission: 33.1 miles east
Which jobs call for a bore near Los Olmos Creek in Rio Grande City?
- Highway crossing: A route under US 83 is bored beneath the roadway, with the TxDOT permit and cover depth shaping the profile.
- Water service: A connection near the City of Rio Grande City system can run beneath Main Street without opening the full paved route.
- Rail crossing: A bore beneath Border Pacific Railroad track needs the railroad’s agreement and a plan for its crossing conditions.
- Creek crossing: A route under Los Olmos Creek is planned around the channel and reviewed for Corps jurisdiction during planning.
- Fiber route: A conduit bore along Charco Blanco Road can pass beneath pavement while marked utilities are exposed before drilling near them.
- Airport service: A line near Rio Grande City Municipal Airport can be installed by bore where the route crosses a road or paved access.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Rio Grande City bore near US 83?
Send the map pin or address first, because a point near US 83 can have a different route and crossing plan than one near Los Olmos Creek. For Rio Grande City planning, tell us what will go underground, plus the pipe or conduit size and footage. A sketch or plans help us see the alignment, access and nearby roads before we scope the bore.
The price follows the work at the specific Rio Grande City site. Ground conditions such as McAllen soil and sandy clay loam affect drilling and fluid needs. Crossings of US 83, Border Pacific Railroad track or Los Olmos Creek add planning and exposure work. Pipe size, bore length, pavement, pits, excavator time and sand backfill also matter. Mobilization is part of the scope because the Yukon yard is 737 road miles from Rio Grande City, and emergency or high profile work can require more planning.
Questions people ask about boring in Rio Grande City
Does Trinity take directional boring work in Rio Grande City and Starr County?
Yes. We take directional boring work in Rio Grande City and across Texas, planning each route around its crossing needs. Our crews or vetted partner drilling contractors’ satellite yards can staff a Starr County job, while you work with Trinity through the bore log. For a route near Main Street, we plan around the actual access and crossings rather than assuming a standard alignment.
Can Rio Grande City McAllen soil corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 43 percent of Rio Grande City, so the line owner should consider casing and tracer wire materials. For Rio Grande City, HDPE is not affected by that soil corrosion concern, so we can consider it for underground lines. McAllen fine sandy loam is mapped under 23 percent of the city, but the route specific soil and the line owner’s material choice still matter.
What ground does a bore pass through in Rio Grande City near McAllen soil?
The ground varies: McAllen fine sandy loam is mapped under 23 percent of Rio Grande City, while Lagloria silt loam covers 17 percent. At about 40 inches, sandy clay loam is mapped under 24 percent and silt loam under 17 percent. Those USDA soil survey patterns are not test borings, so a route near US 83 still needs site specific planning.
Will a Rio Grande City bore hit rock, and how much bedrock is mapped?
Bedrock is mapped within five feet across 8 percent of Rio Grande City, and the mapped bedrock is weathered; hard bedrock is not mapped within 60 inches. The Catahoula, Frio and Vicksburg formations are mapped in the area. A route near Los Olmos Creek still needs ground conditions checked along its actual alignment.
Who approves a Rio Grande City bore under US 83, and which state office reviews it?
The utility owner applies for the TxDOT permit through RULIS, and the TxDOT Pharr District reviews a US 83 right of way crossing. The owner submits our bore plan and profile. Cover requirements depend on the line type, and the permit can set a different depth for the Rio Grande City crossing.
What does a Rio Grande City bore under Border Pacific Railroad need?
A crossing under Border Pacific Railroad needs an agreement from the railroad that owns the track. The agreement sets details such as casing, depth and flagging. Since the railroad has 3.93 track miles in Rio Grande City, the proposed crossing location matters for the bore plan and coordination.
What bore sizes and lengths can you handle near Charco Blanco Road in Rio Grande City?
For work in Rio Grande City, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Charco Blanco Road depends on the route, pipe or conduit size, ground and crossings. Send a map pin and the proposed footage so we can review the scope.
How early should I call Texas811 for a Rio Grande City bore near Main Street?
Paint near Main Street shows a marked utility’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed through Texas811 before continuing.
What affects the cost of a directional bore in Rio Grande City near US 83?
The route and scope determine the price, including length, pipe size, ground, utility exposures, pavement, pits and equipment time. McAllen soil and mapped sandy clay loam can affect drilling needs, while a US 83 or Border Pacific Railroad crossing adds coordination. Creek work near Los Olmos Creek and mobilization from the Yukon yard also shape the job.
Where the Rio Grande City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Rio Grande City
- U.S. Census Bureau, TIGER/Line 2024: Rio Grande City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Rio Grande City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Rio Grande City housing units and year built
- Macrostrat geologic map compilation: map units under Rio Grande City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Rio Grande City
- U.S. Department of Transportation, North American Rail Network: track owners in Starr County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Rio Grande City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Rio Grande City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Rio Grande City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Rio Grande City, Texas
Type the address of your job in Rio Grande City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Rio Grande City
Same county: Roma · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · Garza-Salinas II · West Alto Bonito · La Puerta · B and E · Mesquite · Valle Vista. All counties: Texas county list.
