trinityboringsolutions.com

Bedford Texas Directional Boring: Crosstell Soil, Sulphur Branch Creek and State Highways

Quick Answer: Texas State Highway 121 and Sulphur Branch Creek are key route features for directional boring, also called horizontal directional drilling (HDD), in Bedford and across Texas. Bedford is 213 road miles from our Yukon, Oklahoma main office, and Harwood Road is one local route to plan around. The USDA soil survey maps Crosstell across 35 percent of Bedford. Clay at about 40 inches can grip the pipe, so the reaming and pullback need coordination.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bedford bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 48,728 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 213 miles, about 4.2 hours of driving.
  • Ground: Crosstell soil is mapped on 35 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 36 percent of the area.
  • Highways inside the boundary: Texas State Highway 121, Texas State Highway 183 and FM 157. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Sulphur Branch Creek, Sulphur Branch and Little Bear Creek.
  • Public water: City of Bedford, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor bores near Sulphur Branch Creek in Bedford?

We take directional boring work in Bedford, in Tarrant County, for routes along streets such as Bedford Road and Harwood Road. The Census Bureau Vintage 2024 estimate puts the city population at 48,728. Water, sewer, gas, electric conduit and fiber lines can run beneath Bedford streets or cross Texas State Highway 121 without open cutting its surface.

Our main office is in Yukon, Oklahoma, and Bedford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Crosstell soil and routes near Sulphur Branch Creek, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore meet in Bedford’s Crosstell soil?

Crosstell soil is the largest mapped soil series in Bedford, at 35 percent of the city. The USDA soil survey maps fine sandy loam across 83 percent of the surface, but the material changes with depth: about 40 inches down, clay is mapped across 35 percent and sandy clay loam across 27 percent. Average clay content at that depth is 40 percent. These are mapped soil patterns, not test borings. Sticky clay can ball on a reamer and grip pipe, so the route and reaming plan should account for the deeper texture.

USDA soil survey, inside the Bedford city limitsWhat is mapped
Soil series mappedCrosstell 35 percent, Rader 26 percent, Gasil 21 percent, Urban land (miscellaneous area) 10 percent and Silstid 6 percent
Texture at the surfacefine sandy loam 83 percent, variable 7 percent and loamy fine sand 6 percent
Texture about 40 inches downclay 35 percent, sandy clay loam 27 percent and sandy clay 26 percent
Engineering class about 40 inches downlean clay (CL) 47 percent, fat clay (CH) 35 percent and clayey sand (SC) 6 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches36 percent of the area (0 percent hard rock, 36 percent weathered rock)
Seasonal water table within 60 inches26 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel62 percent of the area
Mapped as urban land (disturbed fill)10 percent of the area

The soil survey maps weathered bedrock within 60 inches across 36 percent of Bedford, with typical bedrock depth at 47 inches. The mapped Woodbine Formation is Cenomanian age and includes sandstone and mudstone, so the ground can change from soil to weathered rock. Seasonal water tables are mapped within 60 inches across 26 percent, while flood prone soils cover 2 percent. High steel corrosion risk is mapped across 62 percent, so the line owner should consider casing and tracer wire materials; HDPE is another pipe option.

How do crews bore through Bedford clay?

We plan a Bedford bore around the soil survey’s clay at about 40 inches and the route’s surface constraints, such as Harwood Road. That helps us control the hole and protect nearby pavement.

  1. At a Bedford location mapped with clay about 40 inches down, we use a thinner drilling fluid with polymer and ream in stages to limit sticky buildup.
  2. Where Crosstell soil has heavy clay, we watch fluid returns closely; pressure near Harwood Road pavement must stay controlled to avoid lifting the surface.
  3. We pothole marked utilities along Pipeline Road with hydrovac before drilling near them, because Bedford’s locate paint gives position but not depth.
  4. Near Sulphur Branch Creek, we plan pits and bore depth around the channel, then track the drill head from the surface and log depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads and creeks affect a Bedford bore near Sulphur Branch Creek?

Texas State Highway 121, Texas State Highway 183 and FM 157 run through Bedford, with Texas State Highway 10 and Texas State Highway 26 just outside the city limits. A route under an existing highway stays bored or tunneled rather than open cut. Harwood Road runs 7.96 miles in Bedford, Bedford Road 4.18 miles and Pipeline Road 3.91 miles. Those long street corridors can shape access, pit placement and how a bore is staged around pavement.

CrossingTypeMapped extentWho has a say
Texas State Highway 121State highway9.9 roadway miles insideState highway office
Texas State Highway 183State highway7.8 roadway miles insideState highway office
FM 157State highway2 roadway miles insideState highway office
Texas State Highway 10Highway nearby0.1 miles outsideState highway office
Texas State Highway 26Highway nearby0.5 miles outsideState highway office
Sulphur Branch CreekStream2.04 channel miles insideChecked for Corps of Engineers jurisdiction
Sulphur BranchStream0.82 channel miles insideChecked for Corps of Engineers jurisdiction
Little Bear CreekStream0.13 channel miles insideChecked for Corps of Engineers jurisdiction
Mesquite BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Bedford or within one mile outside the city, so a track crossing is not a mapped local route. Sulphur Branch Creek runs 2.04 channel miles in the city, and Sulphur Branch runs 0.82 channel miles. Public records map 13 street crossings of named streams. A crossing near Sulphur Branch Creek needs a route planned below the channel, and creek work is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Bedford bore in Tarrant County?

For a bore on Texas State Highway 121, Texas State Highway 183 or FM 157, the line owner files the utility permit in TxDOT’s RULIS system; Trinity prepares the bore plan and profile for that filing. The TxDOT Fort Worth District reviews it. TxDOT cover rules call for 60 inches at highway crossings for electric, communication and water lines, and for pressurized sewer lines. Along highway right of way, electric and communication lines need 48 inches of cover and water lines need 36 inches. The permit can set a different depth. Bedford city streets belong to the city, while Sulphur Branch Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Bedford water lines?

The City of Bedford public water system uses purchased surface water and reports 23,674 service connections serving 49,941 people. That network is a practical starting point when planning a water service bore near Bedford Road. Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Tarrant County. We confirm the line owner for the specific Bedford address before planning an electric conduit bore, and pothole marked lines before drilling near them.

Line ownerWhat it isSourceSize
City of BedfordPublic water systemSurface water bought from another system23,674 connections, 49,941 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bedford’s median housing year at 1983; 84 percent of homes date from 1960 to 1999, 5 percent from before 1960 and 11 percent from 2000 or later. Along Pipeline Road, a replacement bore may follow an older route, while a new service needs its own path. Hydrovac potholing exposes marked utilities before the drill approaches; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Bedford, Hurst and Irving?

Bedford is an incorporated city in Tarrant County, between Dallas and Fort Worth in the Mid Cities area. It covers 10.03 square miles at an elevation of 605 feet, with ZIP codes 76021 and 76022. Hurst is 2.7 miles west, Colleyville is 3.3 miles north and Euless is 3.3 miles east. Irving, the nearest larger city, is 9.6 miles east; Fort Worth, the county seat, is 13.2 miles west. Bedford is 213 road miles and a 4.2 hour drive from our Yukon yard, which factors into mobilization for a Harwood Road job.

Places near Bedford

Which Bedford jobs might need a bore near Harwood Road?

  • Highway crossing: A bore beneath Texas State Highway 121 keeps the route below the pavement instead of cutting across the traveled surface.
  • Water service: A new or replacement connection near Bedford Road can be bored to avoid opening the street along the service route.
  • Fiber conduit: Pipeline Road’s long street corridor may call for conduit installed beneath pavement with pits placed off the traveled surface.
  • Creek crossing: A route at Sulphur Branch Creek needs depth planned below the channel and a check for federal jurisdiction.
  • Electric conduit: Near Harwood Road, we confirm the line owner and expose marked utilities before the drill approaches a crossing.
  • Sewer line: A pressurized sewer crossing of Texas State Highway 183 needs the required highway cover and a route planned around pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Bedford bore near Texas State Highway 121?

For a quote on a Bedford route near Texas State Highway 121, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Those details let us check the path against local pavement, the Crosstell soil map and nearby utilities before setting the work scope.

A short service line near Bedford Road with open access is simpler to plan than a long crossing under Texas State Highway 121. Price depends on footage, pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pit work and excavator time. Crosstell clay can affect reaming, and Sulphur Branch Creek can add crossing planning. Mobilization also reflects the 213 road miles from Yukon, while high profile or emergency work changes the job requirements.

Questions people ask about boring in Bedford

Does Trinity Boring Solutions take Bedford jobs in Tarrant County, and who staffs them?

Yes, we take directional boring work in Bedford and across Texas. Our own crews and crews from partner drilling contractors we have vetted can staff the job, while you work with Trinity from the first call through the bore log. For a route near Harwood Road, we plan around the street, soil and marked utilities.

Who controls Pipeline Road in Bedford, and can a utility line go under it without cutting the street?

Pipeline Road is a city street because Bedford is incorporated. A directional bore can place a utility beneath the street without cutting its pavement; the route and pit locations still depend on the line, the nearby utilities and the Crosstell soil conditions.

How do Bedford’s housing age and Bedford Road affect replacement bores?

Bedford’s median housing year is 1983, and the American Community Survey 2019 to 2023 estimates that 84 percent of homes were built from 1960 to 1999. That age range can mean a replacement route along Bedford Road needs careful utility locating and potholing before the drill approaches existing lines.

Do groundwater or flood prone soils complicate bore pits near Sulphur Branch Creek in Bedford?

They can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 26 percent of Bedford and flood prone soils across 2 percent. Near Sulphur Branch Creek, we plan pit size and depth for wet ground and check creek crossing jurisdiction during planning.

Does Bedford’s Crosstell soil corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 62 percent of Bedford, so the line owner should consider casing and tracer wire materials. HDPE is an option for a route through Crosstell soil. The specific pipe and any coating choice depend on the line owner’s requirements.

What ground does a bore pass through in Bedford’s Crosstell soil?

Crosstell is mapped across 35 percent of Bedford, and fine sandy loam is the leading surface texture. At about 40 inches, the survey maps clay across 35 percent and sandy clay loam across 27 percent. Those are mapped patterns, not test borings; clay can cling to the reamer and grip pipe.

Can I reach Trinity after hours about an urgent bore on Bedford’s Pipeline Road?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent Pipeline Road bore, share the location, what line needs to go in and any known utility or pavement constraints so we can understand the immediate scope.

How much notice does Texas811 need for a Bedford bore near Harwood Road, and what if marks move?

Paint on Harwood Road shows a marked line’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring in Bedford near Texas State Highway 121?

The work scope drives the price: footage, pipe size, Crosstell soil, rock, utilities to expose, pavement, creek crossings and pit or excavator work all matter. A crossing near Texas State Highway 121 can require added planning, and mobilization reflects Bedford’s 213 road miles from the Yukon yard.

Where the Bedford facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bedford

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bedford, Texas

Type the address of your job in Bedford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bedford

Same county: Fort Worth · Arlington · Grand Prairie · Mansfield · Grapevine · Keller · Haltom City · Southlake · Saginaw · Benbrook · Watauga · Crowley. All counties: Texas county list.