Southlake Texas Directional Boring: Gasil Soil, Highway 114 and Big Bear Creek
Quick Answer: Need a route beneath Texas State Highway 114 without cutting pavement? We use directional boring, also called horizontal directional drilling (HDD), for Southlake road, rail and creek crossings. Big Bear Creek and the Fort Worth and Western Railroad at the city boundary call for a route planned around the crossing. Southlake is 203 road miles from our Yukon, Oklahoma main office, with Kimball Avenue among its long streets. Gasil fine sandy loam overlies clay in many mapped areas, so we manage fluid and reaming to keep the hole stable.
Southlake bores at a glance
- Incorporated city in Tarrant County and Denton County, Texas. Population 31,500 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 203 miles, about 4 hours of driving.
- Ground: Gasil soil is mapped on 22 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 35 percent of the area.
- Highways inside the boundary: Texas State Highway 114, FM 1709 and FM 1938. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Big Bear Creek, Dove Creek, Kirkwood Branch and Higgins Branch.
- Public water: City of Southlake, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring under Texas State Highway 114 in Southlake?
Trinity Boring Solutions takes directional boring work in Southlake, where Texas State Highway 114 is one route a bore may need to cross. Need a line beneath that highway without cutting the pavement? We plan a bore for the crossing. Southlake is predominantly in Tarrant County and has 31,500 residents, according to the Census Bureau Vintage 2024 estimate. Our crews can place water, sewer, gas, electric conduit or fiber beneath a road such as Southlake Boulevard.
Our main office is in Yukon, Oklahoma, and Southlake work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982 when planning a Southlake crossing. With the City of Southlake water system and several electric providers reported in Tarrant County, our record of no utility strike in over 25 years reflects the care we bring to locating and exposing existing lines.

How does Gasil soil affect a bore in Southlake?
Southlake soil maps show fine sandy loam at the surface and a mix of clay rich textures deeper down, which affects how we support and ream a bore. Gasil is the leading mapped soil series at 22% of the city, and Gasil fine sandy loam is 13% of its mapped area. At about 40 inches, sandy clay loam accounts for 36%, clay for 23%, and sandy clay for 20%. The USDA soil survey maps these patterns across the city; they are not test borings. Clay can cling to a reamer and grip pipe, so the bore plan accounts for staged reaming and fluid returns.
| USDA soil survey, inside the Southlake city limits | What is mapped |
|---|---|
| Soil series mapped | Gasil 22 percent, Crosstell 20 percent, Rader 17 percent, Birome 15 percent and Silstid 9 percent |
| Texture at the surface | fine sandy loam 75 percent, loamy fine sand 9 percent and gravelly fine sandy loam 6 percent |
| Texture about 40 inches down | sandy clay loam 36 percent, clay 23 percent and sandy clay 20 percent |
| Engineering class about 40 inches down | lean clay (CL) 49 percent, fat clay (CH) 22 percent and clayey sand (SC) 9 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | 35 percent of the area (0 percent hard rock, 35 percent weathered rock) |
| Seasonal water table within 60 inches | 18 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 35% of Southlake, with typical depth at 42 inches; the mapped bedrock is weathered rather than hard. That can slow a bore and call for attention where soil meets rock. Seasonal water tables are mapped within 60 inches across 18%, while flood prone soils cover 3%, so pits and creek routes need planning for wet ground. High steel corrosion risk is mapped across 54%, a reason for the line owner to consider casing and tracer wire materials. The Woodbine Formation, of Cenomanian age, includes sandstone and mudstone, so subsurface conditions can vary.
What does it take to bore Southlake sandy clay loam?
We adapt the bore to Southlake’s sandy clay loam over clay, rather than treating every stretch as the same ground. Gasil soil maps and the deeper clay share help guide fluid, reaming and pipe timing.
- Gasil fine sandy loam covers mapped parts of Southlake, so we use drilling fluid to help hold the sandy face while the bore advances.
- At about 40 inches, sandy clay loam and clay are common mapped textures; staged reaming and thinner fluid help limit sticky buildup on the reamer.
- Where the survey maps weathered bedrock near the typical depth of 42 inches, we allow for slower drilling and check steering at the soil to rock contact.
- For work near Big Bear Creek or a mapped seasonal water table, we plan pits for wet conditions and keep an eye on fluid returns.

Which Southlake roads, tracks or creeks involve the Fort Worth and Western Railroad?
Southlake bores can be planned beneath Texas State Highway 114, FM 1709 and FM 1938, each mapped within the city. Texas State Highway 114 has 10.0 roadway miles inside the limits, so a crossing needs a route and depth suited to the specific location. Southlake Boulevard runs 6.09 miles in the city, while Kirkwood Boulevard runs 6.01 miles and White Chapel Boulevard runs 4.76 miles. Kimball Avenue also runs 4.76 miles. These streets give project planners several distinct places to check for pavement, access and buried utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 114 | State highway | 10 roadway miles inside | State highway office |
| FM 1709 | State highway | 5.1 roadway miles inside | State highway office |
| FM 1938 | State highway | 2.9 roadway miles inside | State highway office |
| Texas State Highway 26 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 114 Business | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 121 | Highway nearby | 0.9 miles outside | State highway office |
| Texas State Highway 360 | Highway nearby | 1.1 miles outside | State highway office |
| Fort Worth and Western Railroad | Railroad nearby | 0 miles outside | The railroad |
| Big Bear Creek | Stream | 3.94 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dove Creek | Stream | 2.7 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kirkwood Branch | Stream | 2.57 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Higgins Branch | Stream | 1.65 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Jones Branch | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Grapevine Lake | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
The Fort Worth and Western Railroad runs along or touches Southlake’s boundary, though no railroad is mapped inside the city and none of the mapped street and rail crossings are inside the limits. A track crossing still needs the railroad’s agreement. Big Bear Creek runs 3.94 channel miles in Southlake, and Dove Creek runs 2.7. Public mapping shows 18 street crossings of named streams in the city. Grapevine Lake touches the boundary and is also a potential crossing consideration.
Who approves a Southlake bore in Tarrant County?
For work beneath Texas State Highway 114, cover depth helps set the bore profile: electric and communication lines need at least 60 inches below the lowest crossed grade, and water lines need 60 inches at a crossing. TxDOT Utility Accommodation Rules also set 60 inches for pressurized sewer at crossings. The line owning utility applies through TxDOT’s online RULIS system, and the TxDOT Fort Worth District reviews it; we prepare the bore plan and profile for the owner’s application. Southlake city streets, including Southlake Boulevard, belong to the incorporated city. A crossing of the Fort Worth and Western Railroad needs an agreement with its owner. Big Bear Creek planning includes checking for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Southlake water system?
The City of Southlake runs the public water system, which uses purchased surface water and reports 11,406 service connections serving 31,576 people. That network matters when routing a new line near Southlake Boulevard or Kimball Avenue, where existing water infrastructure may be in the path. Electric service reported in Tarrant County includes Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri County Electric Cooperative and United Electric Cooperative Service. We confirm the electric line owner for the specific route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Southlake | Public water system | Surface water bought from another system | 11,406 connections, 31,576 people served |
| Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Tarrant County and Denton County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Southlake’s median housing year at 1997; 1% of homes were built before 1960, 62% from 1960 to 1999 and 37% in 2000 or later. A bore near Southlake Boulevard could serve a new connection or replace an older line. Before drilling near the City of Southlake water system or an electric conduit, we hydrovac pothole marked utilities on the bore path. Locate paint gives position, not depth.

Do you cover Southlake and nearby Flower Mound?
We take directional boring work in Southlake, an incorporated city covering 21.84 square miles, mostly in Tarrant County with a smaller part in Denton County. The city sits at an elevation of 638 feet and uses ZIP code 76092. Trophy Club is 3.0 miles northwest, Westlake is 3.8 miles northwest, and Colleyville and Grapevine are each 4.4 miles away in opposite directions. Flower Mound, the nearest larger city, is 6.1 miles north. Fort Worth, the Tarrant County seat, is 16.6 miles southwest. Our Yukon, Oklahoma main office is 203 road miles away, about a 4.0 hour drive.
Places near Southlake
- Directional boring in Trophy Club: 3 miles northwest
- Westlake: 3.8 miles northwest
- Directional boring in Colleyville: 4.4 miles south
- Directional boring in Grapevine: 4.4 miles east
- Directional boring in Keller: 4.6 miles west
- Directional boring in Flower Mound: 6.1 miles north
Which Southlake jobs call for a bore near Big Bear Creek?
- Highway crossing: A water or communication line beneath Texas State Highway 114 can avoid an open cut through the existing pavement.
- Street service: A new line along Southlake Boulevard can pass beneath pavement while pits sit in the dirt on either side.
- Creek crossing: A bore beneath Big Bear Creek keeps the creek bank uncut, with route planning that considers mapped flood prone soil.
- Rail crossing: A line beneath the Fort Worth and Western Railroad boundary track needs an agreed crossing plan before drilling.
- Water connection: A route near the City of Southlake water system can be pothole checked before a new service crosses existing lines.
- Fiber conduit: A conduit near Kimball Avenue can be bored below the street to avoid cutting its paved surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Kimball Avenue in Southlake?
For a Southlake quote, start with the address or map pin, such as a location on Kimball Avenue. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and expected footage. A sketch or plans help show how the route relates to Texas State Highway 114, nearby streets or a creek.
A short, accessible route through Gasil fine sandy loam may be simpler to plan than a crossing with deeper clay or weathered bedrock. Price also reflects bore length, pipe or conduit size, and how many marked utilities must be exposed. Pavement on Texas State Highway 114, a Big Bear Creek crossing, pits and excavator time can add work. A Fort Worth and Western Railroad crossing needs added coordination, and the 203 road miles from Yukon affect mobilization.
Questions people ask about boring in Southlake
Does Trinity take Southlake directional boring work in Tarrant County, and who staffs it?
Yes, we take directional boring projects in Southlake and staff them with our own crews or crews from vetted partner contractors working from satellite yards. Our Yukon office remains your point of contact from the first call through the bore log. That service model applies whether your route is near Southlake Boulevard or elsewhere in Tarrant County.
Who signs off on a bore beneath Texas State Highway 114 in Southlake?
TxDOT reviews the utility owner’s right of way application for a bore beneath Texas State Highway 114. The utility owner submits it in the online RULIS system, and the TxDOT Fort Worth District reviews it. We provide the bore plan and profile for the owner’s application, with the highway cover requirements shaping the proposed depth.
What does a Southlake bore beneath the Fort Worth and Western Railroad require?
A bore beneath the Fort Worth and Western Railroad needs an agreement from the railroad that owns the track. The railroad sets crossing conditions, including casing, depth and flagging. Its track runs along or touches the Southlake boundary, so the route and crossing details need to be coordinated before work begins.
Can you bore a utility line beneath Big Bear Creek in Southlake?
Yes, a line can be planned beneath Big Bear Creek without cutting the creek bank. The route must account for the 3.94 channel miles mapped in Southlake and the nearby flood prone soils. For Southlake crossings, we check US Army Corps of Engineers jurisdiction during planning.
Who runs Southlake’s public water system, and where does its supply come from?
The City of Southlake runs the public water system, which uses purchased surface water. For underground work, we account for Southlake’s 11,406 service connections serving 31,576 people. If your bore route near Kimball Avenue crosses water infrastructure, we locate and expose marked utilities before drilling close to them.
Which electric line owner should I check in Tarrant County before a Southlake conduit bore?
Electric service reported in Tarrant County includes Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri County Electric Cooperative and United Electric Cooperative Service. Those countywide reports do not identify the provider at every Southlake address. Confirm the line owner for the specific route before setting conduit specifications or planning a crossing.
How far is Southlake from Yukon, and does Flower Mound proximity change a bore?
Southlake is 203 road miles, about a 4.0 hour drive, from our Yukon, Oklahoma main office. Flower Mound is 6.1 miles north of Southlake, but the project location and scope determine the work plan. Mobilization from Yukon is considered alongside route length, ground and crossings such as Big Bear Creek.
How soon should I request a Southlake 811 ticket near Southlake Boulevard?
For a bore near Southlake Boulevard, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead. If the start moves more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring under Texas State Highway 114 in Southlake?
The route and scope determine the price for a Texas State Highway 114 bore. Length, line size, Gasil soil and deeper clay, utilities to expose, pavement, pits and creek crossings all affect the work. Railroad coordination or a route far from the Yukon office can also change the plan and mobilization needs.
Where the Southlake facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Southlake
- U.S. Census Bureau, TIGER/Line 2024: Southlake boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Southlake
- U.S. Census Bureau, American Community Survey 2019 to 2023: Southlake housing units and year built
- Macrostrat geologic map compilation: map units under Southlake
- U.S. EPA Safe Drinking Water Information System: public water systems serving Southlake
- U.S. Department of Transportation, North American Rail Network: track owners in Tarrant County and Denton County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Tarrant County and Denton County
- U.S. Geological Survey, Elevation Point Query Service: Southlake elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Southlake
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Southlake
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Southlake, Texas
Type the address of your job in Southlake. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Southlake
Same county: Fort Worth · Arlington · Grand Prairie · Mansfield · North Richland Hills · Euless · Bedford · Haltom City · Hurst · Saginaw · Benbrook · Watauga. All counties: Texas county list.
