Mansfield Texas Directional Boring: Heiden Clay, US 287 and Union Pacific
Quick Answer: Mansfield is an incorporated city, so the city, not Tarrant County, is responsible for Main Street and Broad Street. We do directional boring, also called horizontal directional drilling (HDD), in Mansfield, Texas, including routes beneath US 287 and Walnut Creek. Mansfield is 232 road miles from our Yukon, Oklahoma main office, with Union Pacific track crossings to plan around. Heiden clay can cling to tooling and grip pipe, so we plan staged reaming and manage drilling fluid.
Mansfield bores at a glance
- Incorporated city in Tarrant County, Johnson County and Ellis County, Texas. Population 80,803 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 232 miles, about 4.6 hours of driving.
- Ground: Heiden soil is mapped on 23 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 25 percent of the area.
- Highways inside the boundary: US 287, US 287 Business, Texas State Highway 360, FM 157 and FM 917. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: Union Pacific, with 17 mapped street and rail crossings.
- Named streams inside the boundary: Walnut Creek, Low Branch, Hogpen Branch and Reece Branch.
- Public water: City of Mansfield, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Mansfield near Union Pacific track?
Mansfield is an incorporated city in Tarrant County, where the city is responsible for streets such as Broad Street and Main Street. The Census Bureau Vintage 2024 estimate puts its population at 80,803. We install water, sewer, gas, electric conduit and fiber along those streets and on routes connecting homes to the City of Mansfield water system.
Our main office is in Yukon, Oklahoma, and Mansfield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A Mansfield job along US 287 may instead be a shorter service line or conduit run, with local crossings shaping the plan. Our family business began in 1965, and we have done directional boring since 1982, bringing that experience to Mansfield project planning.

What does the soil survey show about Heiden soil in Mansfield?
The USDA soil survey maps Heiden soil across 23 percent of Mansfield and Houston Black across 20 percent; Heiden clay, 1 to 3 percent slopes, covers 22 percent. Clay makes up 57 percent of surface texture, while the survey maps clay at 40 inches across 80 percent of the area. At that depth in Mansfield, the average clay content is 47 percent, which we consider when planning underground bore paths. These are mapped patterns, not test borings, so a route near Walnut Creek or Broad Street still needs site specific planning.
| USDA soil survey, inside the Mansfield city limits | What is mapped |
|---|---|
| Soil series mapped | Heiden 23 percent, Houston Black 20 percent, Crosstell 17 percent, Ferris 7 percent and Navo 6 percent |
| Texture at the surface | clay 57 percent, fine sandy loam 34 percent and clay loam 7 percent |
| Texture about 40 inches down | clay 80 percent, sandy clay loam 8 percent and sandy clay 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 81 percent, lean clay (CL) 14 percent and silty clay (CL ML) 4 percent |
| Average clay content about 40 inches down | 47 percent |
| Bedrock mapped within 60 inches | 25 percent of the area (0 percent hard rock, 25 percent weathered rock) |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 86 percent of the area |
The survey maps weathered bedrock within 60 inches across 25 percent of Mansfield, with typical bedrock depth at 47 inches; hard bedrock is not mapped in that interval. Weathered rock can slow a bore, and the Eagle Ford Formation, of Turonian age, includes shale, siltstone and limestone. Seasonal water tables are mapped within 60 inches across 5 percent, and flood prone soils across 6 percent, so creek routes need depth planning. High steel corrosion risk is mapped across 86 percent, a concern for steel casing and tracer wire that the line owner should address.
How do we bore through Mansfield clay?
Heiden and Houston Black clay make a Mansfield bore different from a route through loose sand. We control fluid and reaming around the mapped clay, then track the path past local streets and utilities.
- Clay control: Heiden and Houston Black clay can cling to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
- Pressure watch: With clay mapped across much of Mansfield, we monitor fluid returns near pavement to limit pressure that could lift a street surface.
- Utility exposure: Along Broad Street, Texas811 marks show line positions rather than depths, so we use hydrovac potholing to expose each marked utility before drilling nearby.
- Tracking: Where a route approaches Walnut Creek, we follow the drill head from above and record depth and pitch as the bore advances.

What is in the way of a new line in Mansfield near US 287?
US 287 has 23.7 mapped roadway miles within Mansfield, and US 287 Business has 2.1. Texas State Highway 360, FM 157, FM 917, FM 1187 and FM 661 also run within the city limits. Broad Street is the longest named street at 11.15 miles, followed by Matlock Road at 9.12 miles and Main Street at 7.41 miles. That network puts street and highway access into the route plan; boring can pass beneath pavement without cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 287 | US highway | 23.7 roadway miles inside | State highway office |
| US 287 Business | US highway | 2.1 roadway miles inside | State highway office |
| Texas State Highway 360 | State highway | 9.6 roadway miles inside | State highway office |
| FM 157 | State highway | 6.2 roadway miles inside | State highway office |
| FM 917 | State highway | 3.7 roadway miles inside | State highway office |
| FM 1187 | State highway | 3.4 roadway miles inside | State highway office |
| FM 661 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 8.68 track miles inside | The railroad |
| Walnut Creek | Stream | 8.7 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Low Branch | Stream | 8.61 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hogpen Branch | Stream | 5.11 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Reece Branch | Stream | 1.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Willow Branch | Stream | 0.74 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mountain Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 8.68 track miles in Mansfield on the Union Pacific Midlothian Subdivision, and 17 street and rail crossings are mapped in the city. Walnut Creek runs 8.7 channel miles here; Low Branch and Hogpen Branch are also mapped streams. Public records map 36 street crossings of named streams, so a route near a channel needs careful depth planning and a check for federal water jurisdiction. Joe Pool Lake is within one mile but outside the city limits.
Who approves a Mansfield bore in Tarrant County?
Mansfield handles its city streets, while TxDOT reviews work in the right of way of US 287, Texas State Highway 360 and the FM roads through the TxDOT Fort Worth District. The utility owner, not our crew, submits the state highway utility permit through RULIS; we prepare the bore plan and profile for that filing. A bore under Union Pacific track needs an agreement with the railroad. For a Walnut Creek crossing, we check during planning whether the U.S. Army Corps of Engineers has jurisdiction. TxDOT rules call for boring or tunneling beneath existing highway pavement in Mansfield, so we plan crossings below the road.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Mansfield system?
The City of Mansfield public water system uses surface water and reports 37,715 service connections serving 89,227 people. In Tarrant County, Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service. Those reports do not identify the provider at every Mansfield address, so we confirm the line owner before planning an electric conduit bore near the water system or a street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Mansfield | Public water system | Surface water | 37,715 connections, 89,227 people served |
| Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Tarrant County, Johnson County and Ellis County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Mansfield’s median housing year at 2004: 2 percent of housing was built before 1960, 34 percent from 1960 to 1999 and 64 percent in 2000 or later. A bore along Main Street could meet existing water, electric or communication lines, whether a project replaces an older line or adds a new service. We expose marked utilities with hydrovac potholing before drilling near them; paint shows position, not depth.

Where is Mansfield in relation to Rendon?
Mansfield covers 36.79 square miles at an elevation of 593 feet, mostly in Tarrant County, with portions in Johnson and Ellis counties. Its ZIP code is 76063. Rendon is 6.8 miles west, and The Homesteads is 7.0 miles south; Arlington, the nearest larger city, is 9.1 miles north. Fort Worth, the Tarrant County seat, is 19.8 miles northwest. Our Yukon yard is 232 road miles away, a 4.6 hour drive, so distance is part of planning mobilization for Mansfield work.
Places near Mansfield
- Directional boring in Rendon: 6.8 miles west
- Directional boring in The Homesteads: 7 miles south
- Directional boring in Kennedale: 7.6 miles northwest
- Dalworthington Gardens: 8.3 miles north
- Directional boring in Arlington: 9.1 miles north
What kinds of bores come up near Walnut Creek in Mansfield?
- Highway crossing: A bore beneath US 287 needs a route and profile suited to TxDOT review, with pavement left uncut.
- Water service: A connection near the City of Mansfield system can use a bore to pass beneath a street instead of opening the pavement.
- Fiber route: A conduit run crossing Broad Street can keep the street surface intact while reaching properties along the route.
- Creek crossing: A line beneath Walnut Creek needs planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A bore beneath Union Pacific track requires coordination with the railroad and a crossing agreement.
- Street utility: A route under Main Street can avoid a surface cut, with hydrovac potholing used to expose marked utilities first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Mansfield bore near Broad Street?
For a Mansfield quote, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help us scope the route. A route along Broad Street is useful to identify because nearby streets, utilities and pavement can change the work area. We use those details to scope the bore before setting the approach.
The job scope sets the price, with Heiden clay first because sticky ground can require fluid management and staged reaming. Pipe or conduit size and bore length also matter, as do utility crossings that need exposure, pavement, and any creek or drainage crossing near Walnut Creek. A route beneath US 287 adds highway planning, while the 232 road miles from Yukon affect mobilization. Pits, excavator time, backfill and emergency timing can also change the work.
Questions people ask about boring in Mansfield
Does Trinity Boring Solutions take jobs in Mansfield, Tarrant County, and how are crews assigned?
Yes, we take directional boring work in Mansfield, Tarrant County. Our main office is in Yukon, and Mansfield projects are staffed with our own crews or from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity through the project, including the bore log, whether our crew or a partner crew is on site.
What does a Mansfield bore under Union Pacific track require?
A bore beneath Union Pacific track in Mansfield needs an agreement with the railroad that owns it. In Mansfield, the crossing agreement sets conditions for casing, depth and flagging, which guide how we prepare the bore. With 8.68 track miles mapped in the city, the proposed route matters; the railroad crossing must be addressed before that part of the bore is planned.
Can a line be bored under Walnut Creek in Mansfield?
A line can be planned beneath Walnut Creek in Mansfield, subject to route and depth planning. The creek runs 8.7 channel miles within the city, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. We also plan for the channel and its banks rather than treating the crossing like an ordinary street bore.
Who runs Mansfield’s public water system, and what source supplies it?
The City of Mansfield owns its public water system, supplied by surface water, a detail we account for when planning underground work. It reports 37,715 service connections and 89,227 people served. Those figures help identify the system a water service may connect with, but the specific line and route near a Mansfield address still need to be confirmed.
Which electric company serves my Mansfield address in Tarrant County, and who confirms conduit specs?
The electric provider for a specific Mansfield address in Tarrant County needs to be confirmed with the line owner. Oncor Electric Delivery Company and several cooperatives report service in the county, but those records do not assign a provider to every address. The line owner confirms conduit specifications before we plan a bore near its facilities.
Does Mansfield control Main Street, and does a bore have to cut it?
Mansfield’s city streets, including Main Street, are the city’s responsibility rather than the county’s. A directional bore can pass beneath the street without cutting its surface; pits are placed in dirt on each side. We still need the route and utility locations to plan the crossing.
How much Texas811 notice is needed for a Mansfield bore near Broad Street?
For a bore near Broad Street, Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. In Mansfield, if the start moves more than 14 days past the original notice, we make a new request. In Mansfield, we refresh marks through Texas811 if they wear off or move, and hold work until those marks are current.
How far is Mansfield from Yukon, and does Arlington change the job?
Mansfield is 232 road miles and a 4.6 hour drive from our Yukon, Oklahoma main office, so we coordinate travel before scheduling. Arlington is 9.1 miles north of Mansfield, but it does not change the local route or utility checks. The Yukon distance can affect mobilization, especially for work near a Mansfield highway or Walnut Creek.
What affects the cost of a directional bore under US 287 in Mansfield?
The route, length and pipe or conduit size all affect a US 287 bore in Mansfield. Heiden clay can add drilling demands, and highway pavement, utility crossings, creek crossings, pits and excavator time add work to the scope. Mobilization from Yukon, plus emergency or high profile conditions, can also affect the job.
Where the Mansfield facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mansfield
- U.S. Census Bureau, TIGER/Line 2024: Mansfield boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Mansfield
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mansfield housing units and year built
- Macrostrat geologic map compilation: map units under Mansfield
- U.S. EPA Safe Drinking Water Information System: public water systems serving Mansfield
- U.S. Department of Transportation, North American Rail Network: track owners in Tarrant County, Johnson County and Ellis County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Tarrant County, Johnson County and Ellis County
- U.S. Geological Survey, Elevation Point Query Service: Mansfield elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mansfield
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mansfield
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mansfield, Texas
Type the address of your job in Mansfield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mansfield
Counties: Ellis County directional boring · Johnson County directional boring. Same county: Waxahachie · Midlothian · Ennis · Red Oak · Glenn Heights · Ovilla · Ferris · Palmer · Italy · Oak Leaf · Maypearl · Garrett. All counties: Texas county list.
