trinityboringsolutions.com

Haltom City Texas Directional Boring: Sanger Soil, Union Pacific and Little Fossil Creek

Quick Answer: Haltom City is an incorporated city, so the city owns streets such as Haltom Road; we take directional boring, also called horizontal directional drilling (HDD), for routes beneath Interstate 820. From our Yukon, Oklahoma main office, Haltom City is 210 road miles away, with Union Pacific track also among the crossings to plan around. The USDA soil survey maps Sanger soil across 31 percent of the city, and silty clay at about 40 inches can cling to the reamer and hold the bore open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Haltom City bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 45,786 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 210 miles, about 4.1 hours of driving.
  • Ground: Sanger soil is mapped on 31 percent of the area, with silty clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: Interstate 820, US 377, Texas State Highway 121, Texas State Highway 183 and Texas State Highway 26. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, Fort Worth and Western Railroad and Trinity Railway Express, with 15 mapped street and rail crossings.
  • Named streams inside the boundary: Little Fossil Creek, Fossil Creek, Whites Branch Creek and Big Fossil Creek.
  • Public water: City of Haltom City, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone provide directional boring in Haltom City near Union Pacific?

Haltom City is an incorporated city, with city owned streets such as Belknap Street, and Trinity Boring Solutions takes directional boring work there. The Census Bureau Vintage 2024 estimate puts Haltom City’s population at 45,786. We install water, sewer, gas, electric conduit and fiber along streets such as Haltom Road or beneath Interstate 820, with the route and utility locations shaping the bore.

Our main office is in Yukon, Oklahoma, and Haltom City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for the sticky clay mapped around Haltom City. Our family business started in 1965, and we stay involved from the first call through the bore log, whichever crew is on site.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Sanger soil like to bore in Haltom City?

The USDA soil survey maps Sanger as 31 percent of Haltom City, making it the leading mapped soil series for a bore route. Surface clay covers 47 percent of the city, while at about 40 inches the survey maps silty clay across 29 percent and sandy clay loam across 18 percent. The soil map also identifies CH clay across 55 percent at that depth. These are mapped soil patterns, not test borings, so the route still needs field assessment before we set the drilling plan.

USDA soil survey, inside the Haltom City city limitsWhat is mapped
Soil series mappedSanger 31 percent, Frio 13 percent, Bastsil 11 percent, Urban land (miscellaneous area) 7 percent and Purves 7 percent
Texture at the surfaceclay 47 percent, clay loam 15 percent and fine sandy loam 11 percent
Texture about 40 inches downsilty clay 29 percent, sandy clay loam 18 percent and clay 14 percent
Engineering class about 40 inches downfat clay (CH) 55 percent, lean clay (CL) 22 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches11 percent of the area (10 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils19 percent of the area
High corrosion risk for uncoated steel66 percent of the area
Mapped as urban land (disturbed fill)7 percent of the area

The geologic map identifies the Pawpaw Formation, Weno Limestone, and Denton Clay, undivided, of Albian age; mapped bedrock occurs within 60 inches across 11 percent of the area, with a typical depth of 19 inches. That can mean slower drilling where the route meets rock. Seasonal water table is not mapped within 60 inches, but flood prone soils cover 19 percent, so Little Fossil Creek calls for attention to channel depth. High steel corrosion risk is mapped across 66 percent, a concern for steel casing and tracer wire that the line owner should address.

What does it take to bore silty clay in Haltom City?

Silty clay around Haltom City can hold the hole while sticking to the reamer, so we adjust fluid and reaming to the ground along the route. Sanger soil mapping guides the plan, but field conditions decide the setup.

  1. Sanger soil maps include clay and silty clay, so we use a fluid mix suited to sticky ground and stage reaming to limit material building on the tool.
  2. With high clay content mapped at about 40 inches, we watch fluid returns near Haltom Road pavement and keep pressure controlled to reduce the risk of lifting it.
  3. Before drilling near utilities on Belknap Street, we hydrovac pothole marked lines; paint shows their position but does not tell us their depth.
  4. At a Little Fossil Creek crossing, we plan the bore beneath the channel and track the drill head from the surface, logging depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Little Fossil Creek in Haltom City?

Interstate 820, US 377, Texas State Highway 121 and Texas State Highway 183 are among the routes a bore may need to pass beneath in Haltom City. Interstate 820 has 6.1 mapped roadway miles in the city, while US 377 has 6.8. The longest named local street is Haltom Road at 6.25 miles, followed by Belknap Street at 2.87 miles and Loop 820 Svc Road at 2.78 miles. A bore can keep pavement and driveways intact, but the route and work area still need planning.

CrossingTypeMapped extentWho has a say
Interstate 820Interstate6.1 roadway miles insideState highway office
US 377US highway6.8 roadway miles insideState highway office
Texas State Highway 121State highway5.2 roadway miles insideState highway office
Texas State Highway 183State highway3.6 roadway miles insideState highway office
Texas State Highway 26State highway0.3 roadway miles insideState highway office
Spur 474Highway nearby0.3 miles outsideState highway office
Interstate 35Highway nearby1.2 miles outsideState highway office
US 287Highway nearby1.2 miles outsideState highway office
Interstate 30Highway nearby1.5 miles outsideState highway office
Union PacificRailroad3.54 track miles insideThe railroad
Fort Worth and Western RailroadRailroad2.23 track miles insideThe railroad
Trinity Railway ExpressRailroad2.07 track miles insideThe railroad
Little Fossil CreekStream3.53 channel miles insideChecked for Corps of Engineers jurisdiction
Fossil CreekStream3.03 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Haltom City has 3.54 track miles owned by Union Pacific, 2.23 by Fort Worth and Western Railroad, and 2.07 by Trinity Railway Express; public records map 15 street and rail crossings. Little Fossil Creek runs 3.53 channel miles in the city, and Fossil Creek runs 3.03; mapped streets cross named streams at 21 locations. Creek routes need depth planning, and a crossing agreement from the railroad that owns the track sets the rail crossing conditions.

Whose permission does a Haltom City bore in Tarrant County need?

Haltom Road belongs to the City of Haltom City, while Interstate 820, US 377 and state highways fall under TxDOT right of way rules. The TxDOT Fort Worth District reviews state highway utility permits. The utility owner files through RULIS, and we prepare the bore plan and profile for that application and work under the owner’s permit. Cover depth sets the highway bore profile: electric and communication lines need 60 inches at a crossing, and water lines also need 60 inches. A Union Pacific crossing requires an agreement with the railroad, while a Little Fossil Creek crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Haltom City near the City of Haltom City system?

The City of Haltom City public water system uses purchased surface water and reports 13,414 service connections serving 47,014 people. That network is one reason to verify existing lines before setting a bore path near Haltom Road. Utilities reporting electric service in Tarrant County include Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri County Electric Cooperative and United Electric Cooperative Service. We confirm the line owner at the specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Haltom CityPublic water systemSurface water bought from another system13,414 connections, 47,014 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Haltom City’s median housing year at 1977; 26 percent of housing was built before 1960, and 13 percent in 2000 or later. Along older streets such as Belknap Street, a replacement bore may need to pass existing service lines as well as make room for new work. We hydrovac pothole marked utilities on the planned path before drilling near them, since surface marks show location, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Haltom City in relation to Watauga?

Haltom City is in Tarrant County, at an elevation of 597 feet and with 12.35 square miles of land. Its ZIP codes are 76117, 76137 and 76148. Nearby Watauga is 3.9 miles north, Richland Hills is 2.6 miles east, and North Richland Hills is 4.2 miles northeast. Fort Worth, the county seat and nearest larger city, is 5.1 miles southwest. Our Yukon yard is 210 road miles away, a 4.1 hour drive, which affects mobilization for work near Interstate 820.

Places near Haltom City

What kinds of bores come up in Haltom City near Haltom Road?

  • Highway crossing: A bore beneath Interstate 820 can keep the existing pavement intact while the profile accounts for the required cover.
  • Water service: A service route near the City of Haltom City system needs existing water lines located before the new bore is set.
  • Fiber conduit: Along Haltom Road, a conduit bore can pass beneath pavement and driveways without cutting across them.
  • Creek crossing: Little Fossil Creek calls for a route planned below the channel, with waterway jurisdiction checked during planning.
  • Rail crossing: A bore at a Union Pacific track needs the railroad’s crossing agreement to set the work conditions.
  • Street replacement: Belknap Street’s older housing makes potholing useful before a replacement line passes existing buried services.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Haltom City bore near Interstate 820?

For a route near Interstate 820, start with the job address or map pin so we can see where the bore begins and ends. Tell us what will go underground, such as water or fiber, then give the pipe or conduit size and estimated footage. A sketch or plans showing crossings like Little Fossil Creek help us define the route.

In Haltom City, soil and rock conditions are major price factors because mapped Sanger clay can stick to tooling and bedrock occurs within 60 inches in parts of the area. Length and pipe size also shape the equipment and reaming plan. Crossings of Interstate 820, Union Pacific track or Little Fossil Creek add planning and exposure work. Pavement, pits, excavator time, sand backfill, emergency timing and the 210 road miles from Yukon can also affect mobilization and the work scope.

Questions people ask about boring in Haltom City

Does Trinity take directional boring jobs in Tarrant County’s Haltom City, and who staffs them?

Yes, we take directional boring work in Haltom City, Tarrant County. Our own crews perform the work, and partner drilling contractors we have personally vetted may staff jobs from satellite yards. You deal with Trinity from the first call through the bore log, whether the crew is working near Haltom Road or another city route.

Who controls Loop 820 Svc Road in Haltom City, and does a bore require cutting it?

The City of Haltom City owns its city streets, including Loop 820 Svc Road. A directional bore can pass beneath pavement without an open cut through the street. The route still needs planning around marked utilities and access points, and state highway right of way has separate TxDOT permit requirements.

How old are buried lines near Belknap Street in Haltom City, and can replacement bores help?

The American Community Survey 2019 to 2023 estimates put the median housing year in Haltom City at 1977, with 26 percent of housing built before 1960. Replacement bores can install a new line without opening a long trench along Belknap Street. We pothole marked utilities first because older streets can have existing lines in the bore path.

Are groundwater or flood prone soils a problem for bore pits near Little Fossil Creek in Haltom City?

A shallow seasonal water table is not mapped within 60 inches in Haltom City, but flood prone soils cover 19 percent of the city. Little Fossil Creek needs attention to channel depth and pit placement. We assess the actual route and plan the crossing so the bore stays beneath the channel.

Does Sanger soil in Haltom City pose a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 66 percent of Haltom City, so the line owner should consider casing and tracer wire materials. HDPE is not affected by that soil corrosion concern. The appropriate pipe and any steel coatings depend on the line owner’s design for the route.

What ground does a bore pass through in Haltom City, including Sanger soil at 40 inches?

Sanger is the most common mapped soil series in Haltom City at 31 percent, and the USDA soil survey maps silty clay across 29 percent at about 40 inches. That clay can stick to the reamer and hold an open hole. Soil maps describe area patterns, not conditions proven by a test boring at a particular address.

Can I reach Trinity after hours for an urgent bore near Loop 820 Svc Road in Haltom City?

Yes, a person answers Trinity Boring Solutions’ phone 24 hours a day at (405) 409-7423. For an urgent job near Loop 820 Svc Road, share the location, the line involved and the immediate issue so we can understand the work needed. Trinity also provides 24 hour emergency response.

How much notice does Texas811 need for a Haltom Road bore in Haltom City, and what if marks move?

The person arranging excavation for a Haltom Road bore must request a locate through Texas811 at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days beyond the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore near Interstate 820 in Haltom City?

The job’s length and pipe size matter, along with Haltom City’s clay and any rock on the route. Crossings of Interstate 820, railroad tracks or Little Fossil Creek can add planning and exposure work. Pavement, pits, excavator time, backfill and emergency scheduling also affect the scope. Mobilization reflects the 210 road miles from the Yukon yard.

Where the Haltom City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Haltom City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Haltom City, Texas

Type the address of your job in Haltom City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Haltom City

Same county: Arlington · Grand Prairie · Mansfield · Euless · Grapevine · Bedford · Keller · Hurst · Southlake · Saginaw · Colleyville · Benbrook. All counties: Texas county list.