Fort Clark Springs Texas Directional Boring: Olmos Soil, Las Moras Creek and US 90
Quick Answer: Fort Clark Springs Municipal Utility District supplies groundwater, and AEP Texas Central, Medina Electric Cooperative, Pedernales Electric Cooperative and Rio Grande Electric Cooperative report electric service in Kinney County; we confirm the line owner before a bore near US 90. We take directional boring, also called horizontal directional drilling (HDD), work near Las Moras Creek. The Yukon, Oklahoma main office is 566 road miles away, a factor on work along Fort Clark Road. Olmos and Uvalde soils include sticky clay, so we manage drilling fluid and ream in stages.
Fort Clark Springs bores at a glance
- Unincorporated community in Kinney County, Texas. Population 1,215 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 566 miles, about 11.4 hours of driving.
- Ground: Olmos soil is mapped on 42 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 90, RM 3348 and Texas State Highway 131. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Las Moras Creek.
- Public water: Fort Clark Springs Municipal Utility District, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Las Moras Creek in Fort Clark Springs?
Fort Clark Springs Municipal Utility District supplies groundwater, and electric service is reported by four utilities in Kinney County; confirming the owner before a bore helps us plan safe crossings. The Census Bureau counted 1,215 people here in 2020. We install water, sewer, gas, electric conduit and fiber, with routes such as Fort Clark Road or Grand Boulevard shaping where a service bore can run.
Our main office is in Yukon, Oklahoma, and Fort Clark Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965, and we have drilled directionally since 1982. That experience helps us plan around the Olmos soil and Las Moras Creek rather than treat every Fort Clark Springs route alike.

What ground should a Fort Clark Springs bore expect in Olmos soil?
The USDA soil survey maps Olmos soil across 42 percent of Fort Clark Springs, Uvalde across 34 percent and Pintas across 14 percent. Surface texture is mapped as silty clay loam across 48 percent and very cobbly loam across 42 percent. About 40 inches down, silty clay loam is mapped across 48 percent, with cemented material across 42 percent. The survey maps an average clay content of 41 percent at that depth and heavy clay across 58 percent. Those patterns point to sticky cuttings that can cling to the reamer and grip pipe.
| USDA soil survey, inside the Fort Clark Springs mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Olmos 42 percent, Uvalde 34 percent, Pintas 14 percent, Montell 6 percent and Divot 3 percent |
| Texture at the surface | silty clay loam 48 percent, very cobbly loam 42 percent and clay 6 percent |
| Texture about 40 inches down | silty clay loam 48 percent, cemented material 42 percent and clay 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 51 percent and fat clay (CH) 6 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 14 percent of the area |
| Flood prone soils | 17 percent of the area |
| High corrosion risk for uncoated steel | 58 percent of the area |
Bedrock is not mapped in the top five feet, though that does not rule out deeper rock along a Fort Clark Road bore. Seasonal water table is mapped within 60 inches across 14 percent of the area, while none is mapped within 40 inches; plan pits and pumping for a wet spot. Flood prone soils cover 17 percent, including concern near Las Moras Creek. On US 90 crossings, we consider casing and tracer wire materials because high steel corrosion risk is mapped across 58 percent. The mapped Austin Chalk is Late Cretaceous lime mudstone and chalk, with marine fossils.
How do we drill Fort Clark Springs silty clay loam?
The USDA survey maps silty clay loam and heavy clay around Fort Clark Springs. On a route near Las Moras Creek, we adjust fluid and reaming to keep the hole stable without pushing fluid toward pavement.
- In Uvalde silty clay loam, we use a thinner drilling fluid and polymer to limit sticky buildup on the reamer, then enlarge the hole in stages.
- Where the survey maps heavy clay near Fort Clark Road, we watch fluid returns closely and pull the pipe the same day the final hole is opened.
- At a Las Moras Creek crossing, we plan the bore below the channel and check during planning for U.S. Army Corps of Engineers jurisdiction.
- Before drilling near lines along US 90, we hydrovac pothole every marked utility; a walkover locator tracks the head while we log depth and pitch.

Where might a Fort Clark Springs line go under US 90?
US 90 has 1.0 mapped roadway mile inside the Fort Clark Springs community boundary. RM 3348 has 2.6 miles and Texas State Highway 131 has 1.4 miles there; Loop 166 runs 0.1 miles outside the boundary. A highway bore may also have to pass beneath pavement and all travel lanes. Local routes include Fort Clark Road at 3.01 miles, Travis Road at 1.74 miles and Grand Boulevard at 1.42 miles. These street and highway details help set the bore path and access for the entry and exit pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 90 | US highway | 1 roadway miles inside | State highway office |
| RM 3348 | State highway | 2.6 roadway miles inside | State highway office |
| Texas State Highway 131 | State highway | 1.4 roadway miles inside | State highway office |
| Loop 166 | Highway nearby | 0.1 miles outside | State highway office |
| Las Moras Creek | Stream | 3.59 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Imperialist Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Fort Clark Springs or within one mile outside it, so the records show no local track route to plan around. Las Moras Creek runs 3.59 channel miles through the community, and seven mapped street crossings pass over named streams. A crossing near the creek needs a planned depth below the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. For Las Moras Creek boring, we have no lakes or ponds mapped within one mile to plan around.
Who approves a Fort Clark Springs bore in Kinney County?
Fort Clark Springs is an unincorporated community, so there is no city government to approve its streets; county or state authority depends on the route. For work in the right of way of US 90, RM 3348 or Texas State Highway 131, the line owner, not the driller, applies through TxDOT RULIS. The TxDOT Laredo District reviews it. We provide the bore plan and profile for the owner’s application and work under its permit. TxDOT requires boring or tunneling beneath existing highway pavement, with a bore beneath all travel lanes on rural highways. Cover requirements depend on line type, and the district may set a different depth in the permit. No railroad route is mapped locally; a Las Moras Creek crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Fort Clark Springs Municipal Utility District?
Fort Clark Springs Municipal Utility District is a local government water system that uses groundwater wells. Its records list 989 service connections and 1,200 people served. AEP Texas Central, Medina Electric Cooperative, Pedernales Electric Cooperative and Rio Grande Electric Cooperative report electric service in Kinney County. That countywide list does not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Fort Clark Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Fort Clark Springs Municipal Utility District | Public water system | Groundwater wells | 989 connections, 1,200 people served |
| AEP Texas Central, Medina Electric Cooperative, Pedernales Electric Cooperative and Rio Grande Electric Cooperative | Electric utilities reporting service in Kinney County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Fort Clark Springs at 1985. The estimates show 13 percent built before 1960, 77 percent from 1960 to 1999 and 10 percent in 2000 or later. Home age does not date a buried line, but a replacement near Travis Road may follow older infrastructure. We use hydrovac potholing to expose marked water and electric lines before the drill approaches; surface paint shows position, not depth.

Where is Fort Clark Springs in relation to Del Rio?
Fort Clark Springs is an unincorporated community in Kinney County, at an elevation of 1,086 feet and covering 2.97 square miles. Its ZIP code is 78832. Brackettville, the county seat, is 1.9 miles northeast; Spofford is 8.4 miles south. Laughlin AFB is 21.6 miles west, Val Verde Park is 25.0 miles west and Quemado is 26.8 miles southwest. Del Rio, the nearest larger city, is 28.0 miles west. From our Yukon, Oklahoma main office, the trip is 566 road miles and 11.4 drive hours, which affects mobilization for work near US 90.
Places near Fort Clark Springs
- Directional boring in Brackettville: 1.9 miles northeast
- Directional boring in Spofford: 8.4 miles south
- Directional boring in Laughlin AFB: 21.6 miles west
- Directional boring in Val Verde Park: 25 miles west
- Directional boring in Quemado: 26.8 miles southwest
- Directional boring in Del Rio: 28 miles west
Which Fort Clark Springs jobs call for a bore near Fort Clark Road?
- Highway crossing: A bore beneath US 90 can pass under the pavement and travel lanes without cutting through the roadway.
- Water service: A connection from the Fort Clark Springs Municipal Utility District can follow a planned route toward a home near Grand Boulevard.
- Fiber conduit: A small conduit bore along Travis Road can avoid opening the street surface while crossing marked buried lines.
- Creek crossing: A route beneath Las Moras Creek needs channel depth planning and a jurisdiction check during design.
- Street replacement: A new water or sewer line near Fort Clark Road can use pits set beyond the pavement instead of an open cut.
- Utility crossing: Near Scales Road, hydrovac potholing exposes marked electric or water lines before the drill approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Fort Clark Springs bore near Scales Road?
For a bore near Scales Road, send the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help us read the route. Include nearby streets or crossings, such as Grand Boulevard or Las Moras Creek, so we can see where pits and utilities may affect the path.
The Fort Clark Springs route sets the price, with soil conditions first: Olmos and Uvalde clay can demand staged reaming and careful fluid control. Next we look at length, pipe or conduit size, utilities to expose, and concrete or pavement near US 90. Creek or drainage crossings can add planning and pit work. Excavator time and sand backfill also matter, as does mobilization from the Yukon office, 566 road miles away.
Questions people ask about boring in Fort Clark Springs
Does Trinity Boring Solutions take Fort Clark Springs jobs in Kinney County, and how are crews assigned?
Yes. We take directional boring work in Fort Clark Springs and across Texas, with our crews and vetted partner contractor crews available for the work. The job is coordinated through Trinity from the first call to the bore log. A route near Fort Clark Road helps us plan the work and crew logistics.
Can a bore go beneath Las Moras Creek in Fort Clark Springs?
A bore can be planned beneath Las Moras Creek, which has 3.59 channel miles in Fort Clark Springs. The route needs depth planning to stay under the channel, and planning checks whether the crossing is within U.S. Army Corps of Engineers jurisdiction. Soil and access at the entry and exit pits also shape the approach.
Who runs Fort Clark Springs public water system in Kinney County, and what is its source?
Fort Clark Springs Municipal Utility District runs the public water system, and its source is groundwater wells. The system reports 989 service connections and 1,200 people served. Before a bore near Grand Boulevard, we confirm which buried water line is on the proposed path and expose marked utilities before drilling close to them.
Which company owns electric lines at a Fort Clark Springs address in Kinney County?
The electric line owner has to be confirmed for the specific Fort Clark Springs address. AEP Texas Central, Medina Electric Cooperative, Pedernales Electric Cooperative and Rio Grande Electric Cooperative report service in Kinney County. We confirm the owner before planning conduit and check its specifications for a route near US 90.
Who controls Grand Boulevard in Fort Clark Springs, and does a bore require cutting it?
Fort Clark Springs has no city government, so street authority rests with the county or the state according to the road. A bore near Grand Boulevard can place entry and exit pits in dirt and pass beneath the pavement, avoiding a cut through the street surface when the route and conditions allow.
Do the homes and buried lines near Travis Road in Fort Clark Springs date from the same period?
The housing survey gives a median year built of 1985, but that does not establish the age of buried utilities near Travis Road. Replacement bores may need to cross existing water or electric lines. We locate and hydrovac pothole marked utilities on the path before the drill approaches them.
Does Fort Clark Springs being 28.0 miles from Del Rio change a bore mobilization?
The distance to Del Rio is not the measure from our yard: Fort Clark Springs is 566 road miles from our Yukon, Oklahoma main office. That travel distance can affect mobilization for work near US 90. The route, crew access and the ground conditions still determine the equipment and plan for the bore.
How early should I call Texas811 for a Fort Clark Road bore in Fort Clark Springs?
The person arranging a bore along Fort Clark Road must make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, make a new request. Along Fort Clark Road, we refresh worn or moved marks through Texas811 before boring continues.
What affects the cost of a Fort Clark Springs directional bore near US 90?
The route details drive the price, especially clay and the number of utilities to expose near US 90. Length and pipe or conduit size matter, as do pavement, creek or drainage crossings, pits, excavator time and sand backfill. Mobilization from Yukon also affects the job because Fort Clark Springs is 566 road miles away.
Where the Fort Clark Springs facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Fort Clark Springs
- U.S. Census Bureau, TIGER/Line 2024: Fort Clark Springs boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Fort Clark Springs population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Fort Clark Springs housing units and year built
- Macrostrat geologic map compilation: map units under Fort Clark Springs
- U.S. EPA Safe Drinking Water Information System: public water systems serving Fort Clark Springs
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Kinney County
- U.S. Geological Survey, Elevation Point Query Service: Fort Clark Springs elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Fort Clark Springs
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Fort Clark Springs
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Fort Clark Springs, Texas
Type the address of your job in Fort Clark Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Fort Clark Springs
All counties: Texas county list.
