Buffalo Springs Lake Texas Directional Boring: Potter Soil, Gravelly Loam and Cemented Material
Quick Answer: Beside the North Fork Double Mountain Fork Brazos River, Trinity Boring Solutions takes directional boring work, also called horizontal directional drilling (HDD), in Buffalo Springs Lake, Texas. Buffalo Springs Lake is 353 road miles from our Yukon, Oklahoma main office, and Comanche Drive is one local route to plan around. The USDA soil survey maps Potter soil across 32 percent of the town. Extremely gravelly fine sandy loam is mapped at about 40 inches, so gravel can make the drill head wander.
Buffalo Springs Lake bores at a glance
- Incorporated city in Lubbock County, Texas. Population 449 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 353 miles, about 7 hours of driving.
- Ground: Potter soil is mapped on 32 percent of the area, with extremely gravelly fine sandy loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary or within a mile and a half of it.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: North Fork Double Mountain Fork Brazos River and North Fork Dbl Mountain Fork Brazos River.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Comanche Drive in Buffalo Springs Lake?
We take directional boring jobs in Buffalo Springs Lake, Lubbock County, for lines routed along streets such as Comanche Drive and High Meadow Road. The Census Bureau Vintage 2024 estimate is 449, so we scope underground work in Buffalo Springs Lake by location rather than assume townwide coverage. We install water, sewer, gas, electric conduit and fiber, with the route and line type setting the bore plan for each address.
Our main office is in Yukon, Oklahoma, and Buffalo Springs Lake work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been a family business since 1965, and directional boring has been our work since 1982. That experience helps us plan for the gravel and caliche mapped in the Ogallala Formation around Buffalo Springs Lake.

What is Buffalo Springs Lake ground like to bore through Potter soil?
The USDA soil survey maps Potter soil across 32 percent of Buffalo Springs Lake, and the Potter Berda association on 20 to 45 percent slopes covers 26 percent. At about 40 inches below the surface, extremely gravelly fine sandy loam is mapped under 32 percent of the area; sandy clay loam is mapped under 17 percent. The survey averages 22 percent clay at that depth, while 32 percent of the area is mapped as gravelly. These are soil patterns, not test borings, so the exact Comanche Drive route still needs to be checked in the field.
| USDA soil survey, inside the Buffalo Springs Lake city limits | What is mapped |
|---|---|
| Soil series mapped | Potter 32 percent, Kimbrough 13 percent, Berda 10 percent, Acuff 9 percent and Mobeetie 6 percent |
| Texture at the surface | loam 41 percent, gravelly loam 26 percent and clay loam 6 percent |
| Texture about 40 inches down | extremely gravelly fine sandy loam 32 percent, sandy clay loam 17 percent and cemented material 13 percent |
| Engineering class about 40 inches down | clayey gravel (GC) 32 percent, lean clay (CL) 25 percent and silty clayey sand (SC SM) 6 percent |
| Average clay content about 40 inches down | 22 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 1 percent of the area |
Bedrock is not mapped in the top five feet of Buffalo Springs Lake, and seasonal water tables are not mapped within 60 inches. Flood prone soils cover 4 percent of the area, so a route near the North Fork Double Mountain Fork Brazos River needs channel depth considered. High steel corrosion risk is mapped in 1 percent of the area, which can matter for steel casing or tracer wire; the line owner selects coatings. The Ogallala Formation, of Neogene age, includes sand, silt, clay, gravel and caliche, so ground can change along a bore.
How do crews bore Buffalo Springs Lake’s extremely gravelly fine sandy loam?
For Buffalo Springs Lake’s mapped gravelly ground, we use staged reaming and track the drill head so the hole stays on the planned line. The exact Comanche Drive soil still needs field checks.
- With gravelly loam mapped across 26 percent of Buffalo Springs Lake, we ream in stages and have the pipe ready before the final pass to limit hole collapse.
- Gravelly ground can deflect the head, so we check depth and pitch at each rod along routes such as High Meadow Road.
- We track the drill head from the surface with a walkover locator and log its depth and pitch as a Comanche Drive bore advances.
- Before drilling near a marked line, we hydrovac pothole it; older housing along Comanche Road makes checking buried crossings especially useful.

What does a bore have to cross in Buffalo Springs Lake near the North Fork Double Mountain Fork Brazos River?
No highway is mapped inside Buffalo Springs Lake or within 1.5 miles outside its limits, so a local street bore is more likely to follow a town road than a highway right of way. Comanche Drive is the longest named street at 3.59 miles within the town. High Meadow Road covers 3.0 miles, and Comanche Road covers 2.77 miles. A bore can pass beneath a street or driveway without cutting its surface, with entry and exit pits placed in dirt where the route allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| North Fork Double Mountain Fork Brazos River | Stream | 2.43 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Fork Dbl Mountain Fork Brazos River | Stream | 0.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Buffalo Springs Lake | Lake or pond | 246 acres, inside | Checked for Corps of Engineers jurisdiction |
| Lake Ransom Canyon | Lake or pond | 97 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Benson Lake | Lake or pond | 14 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Buffalo Springs Lake or within 1 mile outside its limits, and no street and rail crossing is mapped. The North Fork Double Mountain Fork Brazos River has 2.43 channel miles in town, with another mapped stream name variant covering 0.42 miles. Three street crossings of named streams are mapped. Buffalo Springs Lake itself covers 246 acres inside town limits, so routes near the lake or river need a site specific crossing plan.
Whose permission does a Buffalo Springs Lake bore in Lubbock County need?
Buffalo Springs Lake is incorporated, so its city streets, including Comanche Drive, belong to the city itself. If a route reaches a state highway right of way, the line owner, not our drilling crew, applies through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT’s Lubbock District reviews it. For electric or communication lines, the rules call for 60 inches of cover at a highway crossing and 48 inches along the right of way. Water lines call for 60 inches at crossings and 36 inches along it; pressurized sewer lines need 60 inches at crossings. A river, creek or lake route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines serving Buffalo Springs Lake in Lubbock County?
The water provider for a specific Buffalo Springs Lake address must be confirmed with the city, the county or the local water district before a bore is planned. Electric utilities reporting service in Lubbock County include Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative. Those reports do not identify the provider at every Comanche Road address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Lubbock County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median Buffalo Springs Lake housing year at 1960. The survey estimates 51 percent of housing units were built before 1960, 32 percent from 1960 to 1999 and 17 percent in 2000 or later. A replacement bore along High Meadow Road may need to pass older buried lines as well as new service runs. We hydrovac pothole marked utilities on the path before drilling near them, since paint shows position but not depth.

How far is Buffalo Springs Lake from Slaton and our Yukon yard?
Buffalo Springs Lake is in Lubbock County, at an elevation of 3,019 feet, and covers 1.51 square miles. Its ZIP code is 79404. Ransom Canyon is 0.7 miles east, Slaton is 6.7 miles southeast, Idalou is 8.9 miles north and Lubbock is 11.2 miles west. Lubbock is the county seat, while Slaton is the nearest larger city listed. Our Yukon, Oklahoma main office is 353 road miles away, a 7.0 hour drive, so that distance is part of planning crew mobilization for a Comanche Drive job.
Places near Buffalo Springs Lake
- Directional boring in Ransom Canyon: 0.7 miles east
- Directional boring in Slaton: 6.7 miles southeast
- Directional boring in Idalou: 8.9 miles north
- Directional boring in Lubbock: 11.2 miles west
- Directional boring in Lorenzo: 13.2 miles northeast
Which jobs call for a bore along High Meadow Road in Buffalo Springs Lake?
- Water service: Route a new or replacement service beneath a Comanche Drive driveway instead of opening the paved surface.
- Fiber conduit: A bore along High Meadow Road can carry conduit while keeping the street surface intact.
- Creek crossing: A route near the North Fork Double Mountain Fork Brazos River needs depth and crossing conditions planned before drilling.
- Lake side utility: A bore near Buffalo Springs Lake can avoid cutting a path across the surface between entry and exit pits.
- Sewer line: A pressurized sewer route beneath Comanche Road needs its crossing depth considered if it reaches state highway right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Buffalo Springs Lake quote on Comanche Drive?
A map pin or address for Comanche Drive gives us the exact spot to assess, especially if the route is near a street crossing or the North Fork Double Mountain Fork Brazos River. For Comanche Drive, we need the pipe or conduit size, footage, and what will go in the ground to plan the bore. A sketch or plans help us see pits, crossings and access.
The price follows the route and the work it takes, not one detail alone. Potter soil and the mapped gravel at about 40 inches can affect drilling and reaming. The number of utilities to expose, pavement or concrete, and any drainage crossing also change the work. A route near the North Fork Double Mountain Fork Brazos River may need added crossing planning. Mobilization from Yukon matters too, since Buffalo Springs Lake is 353 road miles from our main office.
Questions people ask about boring in Buffalo Springs Lake
Does Trinity Boring Solutions take directional boring jobs in Buffalo Springs Lake, Lubbock County?
Yes. We take directional boring work in Buffalo Springs Lake, and our own crews or vetted drilling partners handle the field work. Our Yukon main office is 353 road miles away, so staffing is planned around the job and its schedule. From your first call through the bore log, we factor the Kimbrough soil series into the Buffalo Springs Lake boring plan.
Who is responsible for Comanche Road in Buffalo Springs Lake, and can a bore avoid cutting it?
Buffalo Springs Lake is incorporated, so Comanche Road is a city street. Directional boring can place a line beneath the road rather than cutting through its surface, with pits set on either side where access allows. The route and marked utilities still need to be checked before the bore is laid out.
What do Buffalo Springs Lake homes along High Meadow Road say about buried line replacement?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1960, with 51 percent of units built before 1960. A replacement bore along High Meadow Road may encounter existing service lines, while newer construction may need a fresh connection. For a planned bore on High Meadow Road, we expose marked utilities before drilling near them.
What ground should I expect for a Buffalo Springs Lake bore in Potter soil?
The USDA soil survey maps Potter soil across 32 percent of Buffalo Springs Lake. At about 40 inches down, extremely gravelly fine sandy loam is mapped under 32 percent of the area, and sandy clay loam under 17 percent. Gravel can knock a drill head off line, so we monitor depth and pitch as the bore advances.
Will a Buffalo Springs Lake directional bore hit rock?
Bedrock is not mapped in the top five feet of Buffalo Springs Lake, but that does not rule out rock deeper down. The geologic map shows the Neogene Ogallala Formation, which includes gravel and locally cemented sand and caliche. The mapped soil is not a test of a particular Comanche Drive bore path.
Can a line be bored beneath the North Fork Double Mountain Fork Brazos River in Buffalo Springs Lake?
A bore can be planned beneath the North Fork Double Mountain Fork Brazos River, but the route and depth need to suit the crossing. The stream has 2.43 channel miles in town, and planning checks whether the crossing is within U.S. Army Corps of Engineers jurisdiction. Site conditions determine where pits can go.
Can I reach Trinity after hours about an urgent bore near Comanche Road in Buffalo Springs Lake?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for urgent work near Comanche Road. We provide 24 hour emergency response, then review what line needs work, the location and access so we can discuss the next steps.
How early should I call Texas811 before a Buffalo Springs Lake bore on Comanche Drive?
Request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Describe the planned bore path along Comanche Drive. If the start moves more than 14 days past the original notice, request another ticket; worn or moved marks must be refreshed before work resumes.
What affects the cost of a Buffalo Springs Lake bore near the North Fork Double Mountain Fork Brazos River?
The route length, pipe size, soil, crossings and access all shape the price. Gravel mapped in Buffalo Springs Lake may change drilling time, while a river or drainage crossing can add planning and pit work. We also consider utilities to expose, pavement, sand backfill, excavator time and mobilization from Yukon.
Where the Buffalo Springs Lake facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Buffalo Springs Lake
- U.S. Census Bureau, TIGER/Line 2024: Buffalo Springs Lake boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Buffalo Springs Lake
- U.S. Census Bureau, American Community Survey 2019 to 2023: Buffalo Springs Lake housing units and year built
- Macrostrat geologic map compilation: map units under Buffalo Springs Lake
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lubbock County
- U.S. Geological Survey, Elevation Point Query Service: Buffalo Springs Lake elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Buffalo Springs Lake
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Buffalo Springs Lake
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Buffalo Springs Lake, Texas
Type the address of your job in Buffalo Springs Lake. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Buffalo Springs Lake
Same county: Wolfforth · Shallowater · New Deal · Abernathy. All counties: Texas county list.
