trinityboringsolutions.com

Rollingwood Texas Directional Boring: Eckrant Soil, Edwards Limestone and Colorado River

Quick Answer: The City of Rollingwood owns the water system, while Travis County electric reports include Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative; confirm the line owner before work near Rollingwood Drive. We take directional boring, also called horizontal directional drilling (HDD), for routes near Loop 1 and the Colorado River. Rollingwood is 403 road miles from our Yukon, Oklahoma main office, which affects mobilization for a Timberline Drive job. Eckrant soil and shallow Edwards Limestone can make a bore shift from clay to hard rock quickly.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rollingwood bores at a glance

  • Incorporated city in Travis County, Texas. Population 1,438 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 403 miles, about 7.7 hours of driving.
  • Ground: Eckrant soil is mapped on 54 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 78 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Loop 1, Loop 360 and Loop 343.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Rollingwood, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Rollingwood, Travis County?

Trinity Boring Solutions takes directional boring jobs in Rollingwood, where the City of Rollingwood owns the water system and electric providers must be confirmed by address. Rollingwood is in Travis County, and the Census Bureau Vintage 2024 estimate puts its population at 1,438. We install water, sewer, gas, electric conduit and fiber for routes along streets such as Rollingwood Drive, where existing lines need to be located before a new bore.

Our main office is in Yukon, Oklahoma, and Rollingwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical Rollingwood job is much shorter, but Eckrant soil over Edwards Limestone still calls for a plan that fits the ground.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Eckrant soil affect drilling in Rollingwood?

Rollingwood soil maps point to Eckrant as the main ground condition for a bore. The USDA soil survey maps Eckrant across 54 percent of the city and very stony clay across the same share. At about 40 inches below the surface, bedrock is mapped across 78 percent of the area, cemented material across 18 percent and silty clay across 4 percent. Average clay content at that depth is 43 percent, and sandy ground is not mapped there. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Rollingwood city limitsWhat is mapped
Soil series mappedEckrant 54 percent, Brackett 23 percent, Urban land (miscellaneous area) 18 percent and Volente 4 percent
Texture at the surfacevery stony clay 54 percent, gravelly clay loam 23 percent and cemented material 18 percent
Texture about 40 inches downbedrock 78 percent, cemented material 18 percent and silty clay 4 percent
Engineering class about 40 inches downfat clay (CH) 4 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches78 percent of the area (55 percent hard rock, 23 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel59 percent of the area
Mapped as urban land (disturbed fill)18 percent of the area

Bedrock is typically mapped about 11 inches below the surface in Rollingwood, so a drill can meet rock soon after leaving the pit. The USDA soil survey maps hard bedrock within five feet across 55 percent of the area and weathered bedrock across 23 percent. Seasonal water table and flood prone soils are not mapped. High steel corrosion risk covers 59 percent, so the line owner should weigh casing and tracer wire materials; HDPE is not subject to that soil corrosion concern. The mapped Edwards Limestone is Early Cretaceous, which can call for rock tooling.

What does it take to bore Rollingwood bedrock?

Rollingwood bores need a plan for very stony Eckrant clay and Edwards Limestone close to the surface. We check the route and expose marked lines before selecting the tooling and reaming approach.

  1. Eckrant soil is very stony clay, so we use a controlled fluid mix and staged reaming to keep sticky cuttings from building up on the tools.
  2. With Edwards Limestone mapped close to the surface, we check the ground as the bore advances and use rock tooling where the material calls for it.
  3. Rollingwood’s mapped bedrock can begin near the entry pit, so we track the drill head from the surface and log depth and pitch along the route.
  4. Before a bore near Rollingwood Drive, we hydrovac expose marked utilities; paint locates a line’s position but does not show its depth.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where might a Rollingwood bore go under the Colorado River?

Loop 1 runs along or touches Rollingwood city limits, while Loop 360 is 1.1 miles away and Loop 343 is 1.3 miles away. A bore near those roads has to fit the road owner’s right of way and the line being installed. Inside the city, Rollingwood Drive runs 1.27 miles, Bee Caves Road 1.21 miles and Timberline Drive 1.04 miles. Those streets offer likely utility routes, but the bore plan must account for pavement, driveways and marked lines rather than assuming an open path.

CrossingTypeMapped extentWho has a say
Loop 1Highway nearbyRuns along or touches the city limitsState highway office
Loop 360Highway nearby1.1 miles outsideState highway office
Loop 343Highway nearby1.3 miles outsideState highway office
Union PacificRailroad nearby0.6 miles outsideThe railroad
Colorado RiverStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Barton CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Town Lake ColoradoStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Johnson BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Rollingwood, but Union Pacific track is 0.6 miles outside the city limits; a route that reaches it needs the railroad’s crossing agreement. No street and rail crossings are mapped in the city. The Colorado River is 0.2 miles from the limits, and Barton Creek is 0.3 miles away. No named stream street crossings are mapped inside the city, but Rollingwood has 2.29 miles of unnamed drainage, so a route near a channel needs careful depth planning.

Who approves a Rollingwood bore near Loop 1?

Loop 1 is the named highway closest to Rollingwood, and TxDOT’s Austin District reviews a utility permit for work in state highway right of way. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement. If the route reaches Union Pacific track, the railroad’s crossing agreement governs that crossing. A Colorado River or creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Rollingwood near the City of Rollingwood system?

The City of Rollingwood public water system uses purchased surface water and serves 1,611 people through 614 service connections. Travis County electric service reports list Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative, but that list does not identify the provider for every Rollingwood address. We confirm the owner of an electric line before planning conduit near Rollingwood Drive, then pothole marked lines before drilling close to them.

Line ownerWhat it isSourceSize
City of RollingwoodPublic water systemSurface water bought from another system614 connections, 1,611 people served
Oncor Electric Delivery Company, Austin Energy, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rollingwood’s median housing year at 1981; 13 percent of homes were built before 1960, 62 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix can mean either replacement work or new services along Hatley Drive. Hydrovac potholing lets us locate water system and electric lines on the bore path; surface marks show position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Rollingwood in relation to Austin?

Rollingwood is an incorporated city in Travis County, at an elevation of 628 feet and covering 0.7 square miles. Its ZIP code is 78746. Austin is 2.6 miles northeast and is both the nearest larger city and the county seat; West Lake Hills is 2.1 miles northwest. Sunset Valley is 3.7 miles southwest, Lost Creek is 4.2 miles northwest and Barton Creek is 5.0 miles west. From our Yukon yard, Rollingwood is 403 road miles away, a 7.7 hour drive that affects equipment mobilization.

Places near Rollingwood

What boring work comes up along Timberline Drive in Rollingwood?

  • Water service: A new connection near Rollingwood Drive needs a route checked against City of Rollingwood water lines before drilling.
  • Fiber conduit: A fiber run along Timberline Drive can stay underground beneath pavement, with marked utilities exposed on the bore path.
  • Highway crossing: A route at Loop 1 needs a plan for TxDOT right of way and the utility owner’s permit.
  • Creek crossing: If a route reaches Barton Creek or the Colorado River, plan the bore beneath the channel and check jurisdiction during planning.
  • Rail crossing: A route reaching Union Pacific track outside Rollingwood needs the railroad’s agreement before the crossing is planned.
  • Street service: A bore along Hatley Drive can avoid cutting the street surface while connecting a line to a property.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Rollingwood job near Union Pacific?

For a Rollingwood quote, send the address or map pin, what is going underground, the pipe or conduit size and footage; a sketch or plans help. On Timberline Drive, the nearby utility layout and the exact route can change the bore plan, so include the proposed start and end points and any known crossings.

In Rollingwood, soil and rock conditions are the first pricing concern because Eckrant clay can give way to Edwards Limestone near the surface. The number of utilities to expose, pipe size and bore length also matter. A Loop 1 or Union Pacific crossing can add planning and casing needs, while pavement, drainage crossings, pits and excavator time affect the work. Mobilization matters too because the Yukon yard is 403 road miles away.

Questions people ask about boring in Rollingwood

Does Trinity take directional boring jobs in Rollingwood, Travis County?

Yes, we take Rollingwood jobs and keep the customer’s contact with Trinity from the first call through the bore log. Our crews handle the work, with vetted partner drilling contractors operating from satellite yards when needed. The City of Rollingwood water system and the electric line owner are checked as part of planning a route near Rollingwood Drive.

Does Eckrant soil in Rollingwood corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 59 percent of Rollingwood, including areas mapped as Eckrant soil. The line owner should consider the material and protection for steel casing and tracer wire. HDPE is not subject to that soil corrosion concern, but the owner selects the materials for a route near Hatley Drive.

What ground does a bore pass through in Rollingwood’s Eckrant soil?

Eckrant is mapped across 54 percent of Rollingwood, where the surface texture is very stony clay. At about 40 inches down, bedrock is mapped across 78 percent of the area, with cemented material across 18 percent and silty clay across 4 percent. Those USDA soil survey patterns help plan a bore near Timberline Drive, but they are not test borings.

How much bedrock is mapped within five feet of the surface in Rollingwood?

The USDA soil survey maps bedrock within five feet across 78 percent of Rollingwood. Hard bedrock is mapped across 55 percent and weathered bedrock across 23 percent. The mapped geologic unit is Early Cretaceous Edwards Limestone, so a bore near Bee Caves Road may need rock tooling if field conditions match the map.

Who permits a Rollingwood bore under Loop 1?

For work in Loop 1 right of way, the utility owner submits the application through TxDOT’s RULIS system, and TxDOT’s Austin District reviews it. We provide the bore plan and profile for the owner’s filing. The route and line type determine the permit details, including cover requirements for a crossing near Rollingwood.

What does a Rollingwood bore under Union Pacific track need?

A bore under Union Pacific track needs an agreement from the railroad that owns it. The track is 0.6 miles outside Rollingwood’s limits, so the agreement matters if the proposed route reaches it. The railroad sets crossing conditions such as casing, depth and flagging, and TxDOT needs a copy if highway right of way is also involved.

What bore sizes and lengths can Trinity handle near Hatley Drive in Rollingwood?

We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The actual setup near Hatley Drive depends on the pipe or conduit, Eckrant soil and any marked utilities on the route. A sketch helps us assess the entry and exit points.

How much 811 notice does a Rollingwood Drive bore need, and what if marks move?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If a Rollingwood Drive start slips more than 14 days past the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near Loop 1 in Rollingwood?

Eckrant soil and shallow Edwards Limestone are major factors because they can change the tooling and time needed. Bore length, pipe size, utilities to expose, pavement, pits and drainage crossings also shape the job. A Loop 1 crossing may add permit planning, while mobilization reflects the 403 road miles from the Yukon yard.

Where the Rollingwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rollingwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rollingwood, Texas

Type the address of your job in Rollingwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rollingwood

Same county: Pflugerville · Manor · Lakeway · Leander · Wells Branch · Lago Vista · Bee Cave · Hornsby Bend · Cedar Park · Shady Hollow · Hudson Bend · Jonestown. All counties: Texas county list.