trinityboringsolutions.com

Conroe Texas Directional Boring: Soil, Stewarts Creek And Union Pacific

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for Conroe routes under roads such as Davis Street and near Stewarts Creek. Our Yukon, Oklahoma main office is 418 road miles from Conroe, with Interstate 45 and Loop 336 among the local routes that shape access. Conroe soil maps include clay at about 40 inches, which can grip a pipe and call for staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Conroe bores at a glance

  • County seat of Montgomery County, Texas. Population 114,581 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 418 miles, about 8 hours of driving.
  • Ground: Conroe soil is mapped on 32 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 45, Texas State Highway 105, Loop 336, FM 3083 and Texas State Highway 75. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific and BNSF Railway, with 39 mapped street and rail crossings.
  • Named streams inside the boundary: Stewarts Creek, West Fork San Jacinto River, Fork San Jacinto River and Little Caney Creek.
  • Public water: City of Conroe, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Conroe, Montgomery County?

Yes, Trinity Boring Solutions takes directional boring work in Conroe, Montgomery County, where the Census Bureau Vintage 2024 estimate puts the population at 114,581. We install water, sewer, gas, electric conduit and fiber, including service routes along Davis Street or connections crossing Loop 336. The route and line size help us plan the bore.

Our main office is in Yukon, Oklahoma, and Conroe work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line near Frazier Street to a 48 inch casing for a Loop 336 crossing, our equipment covers small connections and large infrastructure. Our family business dates to 1965; directional boring has been part of our work since 1982, including the kind of constrained street planning Davis Street calls for.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect in Conroe?

Conroe soil is the leading mapped soil series in the city, and it covers 32 percent of the area, according to the USDA soil survey. At about 40 inches below the surface, clay is mapped across 44 percent of the area, while the average clay content at that depth is 31 percent. Surface soils include loamy fine sand across 35 percent. These are mapped patterns, not a reading from a particular lot, so the exact route still needs to guide the bore plan.

USDA soil survey, inside the Conroe city limitsWhat is mapped
Soil series mappedConroe 32 percent, Splendora 9 percent, Landman 7 percent, Segno 5 percent and Woodville 5 percent
Texture at the surfaceloamy fine sand 35 percent, fine sandy loam 20 percent and fine sand 16 percent
Texture about 40 inches downclay 44 percent, fine sand 16 percent and loam 16 percent
Engineering class about 40 inches downclayey sand (SC) 31 percent, lean clay (CL) 24 percent and fat clay (CH) 18 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches67 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel68 percent of the area
Mapped as urban land (disturbed fill)3 percent of the area

For Conroe, the USDA soil survey does not map bedrock in the top five feet, though that does not rule out deeper rock. A seasonal water table within 60 inches is mapped across 67 percent of the area, so pits near Stewarts Creek may need pumping. Flood prone soils cover 8 percent. High steel corrosion risk is mapped across 68 percent, a concern for casing and tracer wire that the line owner should address. The Gelasian Alluvial pebble gravel and sand unit includes clay, silt, sand and gravel, so ground can change along a bore.

How do we drill through clay in Conroe?

We plan each Conroe bore around the soil changes mapped below the surface, including clay at about 40 inches and loamy fine sand near the top. That mix affects fluid, reaming and pit setup.

  1. Where clay is mapped at about 40 inches in Conroe, we use a thinner drilling fluid and polymer, ream in stages, and pull the pipe before the hole can grip it.
  2. Conroe’s mapped loamy fine sand can cave behind the drill, so we build the bore in stages and have the pipe ready before the final ream.
  3. With a seasonal water table mapped within 60 inches across 67 percent of Conroe, we keep pits small and pump them as needed, especially near Stewarts Creek.
  4. Before a bore near Davis Street, we expose marked utilities with hydrovac, then track the drill head from above and log its depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Could a Conroe bore cross Stewarts Creek?

Conroe bores may need to pass beneath Interstate 45, Texas State Highway 105, Loop 336 or one of the city’s long streets. Loop 336 runs 19.91 miles within the city, followed by Frazier Street at 7.93 miles, Davis Street at 7.74 miles and Longmire Road at 6.99 miles. A route under existing highway pavement is bored or tunneled rather than open cut. The specific road and access points shape where entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
Interstate 45Interstate28 roadway miles insideState highway office
Texas State Highway 105State highway18.2 roadway miles insideState highway office
Loop 336State highway14.3 roadway miles insideState highway office
FM 3083State highway11.2 roadway miles insideState highway office
Texas State Highway 75State highway9 roadway miles insideState highway office
FM 1484State highway7.6 roadway miles insideState highway office
FM 2854State highway6.2 roadway miles insideState highway office
FM 1314State highway3.7 roadway miles insideState highway office
FM 830State highway3.2 roadway miles insideState highway office
FM 1488State highway3 roadway miles insideState highway office
FM 1097State highway0.2 roadway miles insideState highway office
Texas State Highway 242State highway0.1 roadway miles insideState highway office
Union PacificRailroad13.07 track miles insideThe railroad
BNSF RailwayRailroad9.19 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific track runs 13.07 miles through Conroe, and BNSF Railway runs 9.19 miles; public records map 39 street and rail crossings. A track route needs its owner’s crossing agreement. Stewarts Creek runs 13.66 channel miles in the city, and public records map 65 street crossings of named streams. Lake Conroe is also inside city limits. Those water crossings need a jurisdiction check during planning, and creek banks can stay uncut with a bore.

Who approves a Conroe bore near Union Pacific tracks?

A Conroe bore under Interstate 45, Texas State Highway 105 or Loop 336 needs a TxDOT utility permit for work in the highway right of way. The TxDOT Houston District reviews it, while the utility owner submits the application through the online RULIS system; we prepare the bore plan and profile for that filing. A route beneath Union Pacific or BNSF Railway track needs an agreement from the railroad that owns it. Stewarts Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Because Conroe is incorporated, Davis Street and Frazier Street are city streets, not county roads.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines may be near the City of Conroe water system?

The City of Conroe public water system uses purchased surface water and serves 113,912 people through 56,627 service connections. A route near Davis Street may involve existing water lines as well as other marked utilities. CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report electric service in Montgomery County. For a Conroe electric conduit bore, we confirm the line owner for the exact address before planning its route.

Line ownerWhat it isSourceSize
City of ConroePublic water systemSurface water bought from another system56,627 connections, 113,912 people served
CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Montgomery CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Conroe’s median housing year at 2004; 4 percent of homes were built before 1960, 38 percent from 1960 to 1999 and 58 percent in 2000 or later. That mix can mean replacement work on older routes as well as new service connections, but it does not date a buried line on Frazier Street. We hydrovac pothole marked utilities along the bore path before drilling near them, since locate paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What places near Conroe, including Panorama Village, can our crews serve?

Conroe is the Montgomery County seat, at elevation 227 feet, and covers 75.86 square miles. Its ZIP codes are 77304, 77301, 77303, 77384, 77316 and 77356. Panorama Village is 3.8 miles north, Willis is 7.3 miles north and Cut and Shoot is 8.3 miles east. Houston is 38.0 miles south and is the nearest larger city listed. From our Yukon, Oklahoma yard, Conroe is 418 road miles and an 8.0 hour drive, which is part of planning a Loop 336 mobilization.

Places near Conroe

Which Conroe jobs call for a bore under Loop 336?

  • Highway crossing: A bore beneath Interstate 45 or Loop 336 can leave the paved travel lanes uncut.
  • Water service: A new connection near the City of Conroe system can be routed beneath Davis Street without opening the street surface.
  • Fiber route: Conduit along Frazier Street can be bored around existing marked lines after they are exposed.
  • Creek crossing: A route under Stewarts Creek can keep the channel and banks intact, with jurisdiction checked during planning.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad owner’s agreement before the crossing is planned.
  • Drainage route: A bore near the West Fork San Jacinto River can avoid an open trench across the channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Conroe bore near Longmire Road?

A map pin near Longmire Road matters because the exact location shows whether access, pavement or a crossing changes the bore plan. We need the Conroe address or pin, what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us see the route and any nearby road, creek or track.

The 418 road miles from Yukon are one part of mobilization for a Conroe job. Conroe soil and clay affect drilling time; a Union Pacific crossing, a Stewarts Creek route or pavement on Interstate 45 adds planning and crossing needs. Pipe size, length, exposed utilities, concrete, drainage, pit work, excavator time and sand backfill also shape the scope. High profile or emergency work in Conroe can change our plan and affect how we schedule the bore.

Questions people ask about boring in Conroe

Does Trinity take boring work in Conroe, Montgomery County, and how is it staffed?

Yes. Trinity takes directional boring work in Conroe, Montgomery County, and keeps the customer’s project with Trinity from the first call through the bore log. Our own crews and partner drilling contractors from vetted satellite yards handle the field work. The plan is set for the specific route, such as a service connection near Davis Street.

Can a line be bored under Stewarts Creek in Conroe?

A bore can be considered for a route under Stewarts Creek, which runs 13.66 channel miles in Conroe. The crossing plan needs to account for the channel and banks, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. The precise entry and exit locations determine the workable path.

Who owns Conroe’s public water system, and where does its water come from?

The City of Conroe owns the public water system, which uses purchased surface water; we still confirm line ownership before boring. Public records list 56,627 service connections and 113,912 people served; we still verify each Conroe address before underground work. For a bore near Davis Street, we still need the route and line owner information to plan around existing water infrastructure.

Which electric utilities report service in Conroe, Montgomery County, and who confirms conduit specs?

CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report electric service in Montgomery County. Those records do not identify the provider at every Conroe address, so we confirm line ownership before planning a bore. The line owner needs to be confirmed before planning a conduit bore, including one near Loop 336.

Who is in charge of Davis Street in Conroe, and does it need to be cut?

Davis Street is a city street in incorporated Conroe. A bore can pass beneath a street without cutting its surface, subject to the route and approvals that apply. The street is 7.74 miles long within the city, so a map pin helps identify the crossing location and pit access.

How old are homes and buried lines near Frazier Street in Conroe?

Conroe’s median housing year is 2004, according to American Community Survey 2019 to 2023 estimates. Homes built before 1960 account for 4 percent, while 38 percent date from 1960 to 1999. Those figures do not date individual lines near Frazier Street, so we expose marked utilities before setting a replacement bore path.

Can I call Trinity after hours about an urgent bore on Davis Street in Conroe?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, and we provide 24 hour emergency response. For an urgent Davis Street job, share the location and what line needs to go in so we can understand the route and access.

How much notice does Texas811 need for a Conroe bore along Loop 336?

For a bore along Loop 336, the Texas811 locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead. If Conroe work starts more than 14 days past the original notice, we submit a new request before proceeding. Worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore under Interstate 45 in Conroe?

The job scope determines the price for an Interstate 45 bore in Conroe. Length and pipe size matter, as do Conroe’s clay soils, pavement, exposed utilities and any creek or railroad crossing. Pit work, excavator time, backfill, emergency timing and mobilization from Yukon also affect the estimate.

Where the Conroe facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Conroe

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Conroe, Texas

Type the address of your job in Conroe. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Conroe

Same county: The Woodlands · Magnolia · Pinehurst · Oak Ridge North · Montgomery · Roman Forest · Splendora · Patton Village · Porter Heights · Woodbranch · Stagecoach · Deerwood. All counties: Texas county list.