D’Hanis Texas Directional Boring: Castroville Clay, US 90 and Parkers Creek
Quick Answer: D’Hanis is an unincorporated community, and we do directional boring, also called horizontal directional drilling (HDD), for utility routes beneath US 90 and local streets. Our Yukon, Oklahoma main office is 527 road miles away, while Main Street and FM 1796 call for route specific access planning. The USDA soil survey maps Castroville soil across 58% of the community. At about 40 inches, clay makes up 74% of mapped soil, so sticky cuttings and pressure near pavement need attention.
D’Hanis bores at a glance
- Unincorporated community in Medina County, Texas. Population 785 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 527 miles, about 10.3 hours of driving.
- Ground: Castroville soil is mapped on 58 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 15 percent of the area.
- Highways inside the boundary: US 90, FM 2200 and FM 1796. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Parkers Creek and Seco Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in D’Hanis near US 90?
Trinity Boring Solutions takes directional boring work in D’Hanis, including routes beneath US 90 and the community’s streets. D’Hanis is an unincorporated community in Medina County, so it has no city government; county or state authority is responsible for its roads. The 2020 Census count was 785 people; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along roads such as Main Street and South Street.
Our main office is in Yukon, Oklahoma, and D’Hanis work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For work planned in D’Hanis, our family business began in 1965, and we have done directional boring since 1982. Four decades of boring informs how we plan for D’Hanis clay, including staged reaming and a same day pull when the hole is ready.

What is D’Hanis Castroville soil like to bore?
D’Hanis ground is chiefly mapped as Castroville soil, so clay loam and deeper clay are more relevant to a bore than sandy ground. The USDA soil survey maps the Castroville series across 58% of the community and Castroville clay loam on 55%. At the surface, clay loam covers 77% of the mapped area. At about 40 inches, clay is mapped under 74% of the area, with an average clay content of 35%. These are soil survey patterns, not test borings, but they point to sticky cuttings and a hole that can grip pipe.
| USDA soil survey, inside the D’Hanis mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Castroville 58 percent, Divot 17 percent, Atco 15 percent and Knippa 7 percent |
| Texture at the surface | clay loam 77 percent, loam 15 percent and clay 7 percent |
| Texture about 40 inches down | clay 74 percent, loam 15 percent and silty clay loam 7 percent |
| Engineering class about 40 inches down | lean clay (CL) 84 percent and silty clay (CL ML) 15 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 15 percent of the area (0 percent hard rock, 15 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 18 percent of the area |
| High corrosion risk for uncoated steel | 82 percent of the area |
The USDA survey maps weathered bedrock within 60 inches across 15% of D’Hanis, but none within 40 inches; deeper rock is still possible. Seasonal water is not mapped within 60 inches, while flood prone soils cover 18%, a reason to plan carefully near Parkers Creek. High steel corrosion risk is mapped across 82%, so the line owner should choose casing and tracer wire materials; HDPE avoids that steel concern. The geologic map includes Cenozoic alluvium and Late Cretaceous sedimentary deposits, including sand, chalk and mud.
How do we drill D’Hanis clay?
For D’Hanis clay, we control fluid and reaming so sticky cuttings do not load the tool or grip the pipe. The mapped clay around Main Street and South Street guides the plan.
- Castroville clay loam dominates the mapped soil, so we use thinner fluid and polymer, then open the hole in stages to limit sticky buildup on the reamer.
- At about 40 inches, clay is mapped under 74% of D’Hanis; we watch fluid returns near US 90 so pressure does not lift pavement.
- Because clay can grip pipe as it swells, we have the line ready and pull it the same day the hole is opened along streets such as Main Street.
- For a Parkers Creek route, we plan depth below the channel and check the crossing during planning; pits stay in dirt rather than on the creek bank.

What does a D’Hanis bore have to cross near Union Pacific?
US 90, FM 2200 and FM 1796 run inside the mapped D’Hanis community boundary, so a route may need to pass beneath a state highway or farm to market road. Main Street, Old Eagle Pass Road and South Street are among the longest named streets, with 1.78, 1.35 and 1.01 miles mapped inside the community. A bore can keep pavement and driveways uncut, but each route still needs a plan for its road right of way and marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 90 | US highway | 5.2 roadway miles inside | State highway office |
| FM 2200 | State highway | 0.7 roadway miles inside | State highway office |
| FM 1796 | State highway | 0.7 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.76 track miles inside | The railroad |
| Parkers Creek | Stream | 2.1 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Seco Creek | Stream | 1.73 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Live Oak Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Parker Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific track runs 1.76 miles through D’Hanis on the Del Rio Subdivision, and three street and rail crossings are mapped. A route crossing that track needs an agreement from Union Pacific; its terms set crossing details such as casing, depth and flagging. Parkers Creek has 2.1 channel miles inside the community and Seco Creek has 1.73. Eleven street crossings of named streams are mapped, so a creek route needs channel depth planning and a jurisdiction check.
Do I need a permit for a D’Hanis bore in Medina County?
A bore in the US 90, FM 2200 or FM 1796 right of way needs a TxDOT utility permit, reviewed by the San Antonio District. D’Hanis has no city government, so road authority depends on whether the route is on a state road or a county road, not a city permit office. The utility owner files the TxDOT application through RULIS; we prepare the bore plan and profile for its filing. A crossing of the Union Pacific track also needs the railroad’s agreement, and a Parkers Creek crossing is checked for federal water jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in D’Hanis, Medina County?
The water provider for a specific D’Hanis address must be confirmed with the county or local water district before planning a bore near Main Street; public records do not identify a matched provider. Electric service reported in Medina County includes AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative. Those reports do not identify the line owner at every address, so confirm the owner and conduit specifications before planning an electric bore near US 90.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Medina County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put D’Hanis’s median housing year at 1995; 21% of homes were built before 1960, 35% from 1960 to 1999 and 44% in 2000 or later. A replacement route along Old Eagle Pass Road may involve older buried lines, while newer construction can call for service extensions. Before drilling near marked lines, we hydrovac pothole each one on the bore path; paint shows position, not depth.

How far is D’Hanis from Hondo and our Yukon office?
D’Hanis is in Medina County, at 882 feet elevation, and covers 2.63 square miles. ZIP codes are 78850 and 78861. Hondo, the county seat and nearest larger place, is 6.7 miles east; Sabinal is 12.1 miles west, and Yancey is 14.7 miles southeast. D’Hanis is 527 road miles from our Yukon, Oklahoma main office, so we plan mobilization around the 10.3 hour drive. That distance affects mobilization planning for a bore on US 90 or near Parkers Creek.
Places near D’Hanis
- Directional boring in Hondo: 6.7 miles east
- Directional boring in Sabinal: 12.1 miles west
- Directional boring in Yancey: 14.7 miles southeast
- Directional boring in Knippa: 21.9 miles west
- Directional boring in Moore: 24.5 miles southeast
What kinds of bores come up around D’Hanis and Parkers Creek?
- Highway crossing: A bore beneath US 90 keeps the pavement uncut, with the utility owner arranging the TxDOT right of way permit.
- Street service: Water or sewer conduit along Main Street can pass below pavement, with pits placed in dirt on each side of the route.
- Fiber route: A conduit bore near FM 1796 can connect services without an open trench across the road surface.
- Creek crossing: A Parkers Creek bore needs a depth plan below the channel and a check for federal water jurisdiction.
- Rail crossing: A route beneath Union Pacific track on the Del Rio Subdivision needs the railroad’s agreement and its crossing conditions.
- Electric conduit: Near Old Eagle Pass Road, we expose marked utilities first and confirm the electric line owner before setting conduit specifications.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a D’Hanis bore near Nester Lane?
For a quote near Nester Lane, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Main Street access, the proposed route and nearby marked utilities help us understand where pits can sit without putting pavement in the bore path.
The job details set the price, with ground, crossings and logistics carrying different weight. Castroville clay can require staged reaming and careful fluid control; a crossing beneath US 90 or Union Pacific adds coordination and crossing requirements. Creek work near Parkers Creek, pavement, concrete, pit and excavator needs, sand backfill, and the number of utilities to expose also affect the scope. Mobilization from Yukon matters for D’Hanis because the road trip is 527 miles.
Questions people ask about boring in D’Hanis
Does Trinity take directional boring work in D’Hanis, Medina County, and who staffs it?
Yes. We take directional boring work in D’Hanis, and Trinity stays responsible from the first call through the bore log. Our own crews handle the work, with support from satellite yards run by drilling contractors we have vetted. That staffing model applies to routes near US 90 as well as streets such as Main Street.
Who owns electric lines in D’Hanis, Medina County, and who confirms conduit specs?
The specific electric line owner has to be confirmed for the D’Hanis address before conduit is planned. AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative report service in Medina County, but that does not identify the owner on South Street or at every other address.
Does Medina County or the state control South Street in D’Hanis, and must it be cut?
D’Hanis has no city government, so the road authority depends on whether South Street is a county road or a state route. Directional boring can pass below a street without cutting its surface, subject to route approval and utility locating. We expose marked lines before drilling near them along South Street.
Could old buried lines along Old Eagle Pass Road in D’Hanis affect a replacement bore?
They could. The American Community Survey 2019 to 2023 five year estimates put the median housing year in D’Hanis at 1995, and 21% of homes were built before 1960. For replacement work near Old Eagle Pass Road, we need the route and utility marks, then expose marked lines before drilling close to them.
Do groundwater or flood prone soils cause pit problems near Parkers Creek in D’Hanis?
Seasonal water is not mapped within 60 inches in D’Hanis, but flood prone soils cover 18% of the area, so Parkers Creek still needs site specific planning. We place pits away from the channel where the route allows and plan the bore depth beneath it. The creek crossing is also checked for federal water jurisdiction.
Does Castroville soil in D’Hanis corrode steel, and what pipe should a bore use?
The USDA soil survey maps high steel corrosion risk across 82% of D’Hanis, including areas of Castroville soil. The line owner selects suitable coatings for steel casing or tracer wire. When planning directional boring in D’Hanis, we account for the fact that HDPE is not affected by that soil corrosion concern. The material choice should be settled before planning a route beneath Main Street.
Can I reach Trinity after hours about an urgent D’Hanis bore near South Street?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for urgent work near South Street. The route, line type and access still determine what work can be arranged. For a bore near US 90, the state right of way process may also affect the plan.
How early should I call Texas811 for a D’Hanis bore along Main Street, and what if marks move?
The person arranging a bore along Main Street must request a Texas811 locate at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before work. For D’Hanis work, if the start slips more than 14 days past the original notice, we make a new request. Before work continues in D’Hanis, we refresh worn or moved marks through Texas811 to keep the marked route current.
What affects the price of a directional bore under US 90 in D’Hanis?
The scope drives the price: Castroville clay, pipe size and bore length matter, as do utilities to expose, pavement, pits, excavator time and backfill. A US 90 crossing adds highway coordination, and Union Pacific or Parkers Creek crossings bring their own planning. Mobilization also matters because D’Hanis is 527 road miles from Yukon.
Where the D’Hanis facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside D’Hanis
- U.S. Census Bureau, TIGER/Line 2024: D’Hanis boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: D’Hanis population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: D’Hanis housing units and year built
- Macrostrat geologic map compilation: map units under D’Hanis
- U.S. Department of Transportation, North American Rail Network: track owners in Medina County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Medina County
- U.S. Geological Survey, Elevation Point Query Service: D’Hanis elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to D’Hanis
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in D’Hanis
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in D'Hanis, Texas
Type the address of your job in D'Hanis. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for D'Hanis
Same county: Devine · Castroville · Natalia · Lake Medina Shores · LaCoste · Lytle. All counties: Texas county list.
